Cabletron Systems 3T02-04 Shielded Twisted Pair, Connecting a Token Ring Module to a UTP Hub

Page 17

Connecting the Token Ring Module to a Hub

Refer to the Hub manufacturer’s manual for specific cabling information for connecting workstations to the Hub.

To connect the Token Ring module to a UTP Hub, attach one end of a UTP cable to the Token Ring module’s RJ45 connector and connect the other end with the appropriate connector to any port except the Ring In or Ring Out ports on a UTP Hub. The Ring In/Ring Out ports are used for interconnecting Hubs. Refer to the example shown in Figure 2-1.

Figure 2-1 Connecting a Token Ring Module to a UTP Hub

2.4.2Shielded Twisted Pair

When using Shielded Twisted Pair cabling, refer to the following (this assumes patch cables that are no longer than 8 feet or 2.4 meters):

Table 2-2 Shielded Twisted Pair Cabling Specifications

Data Rate

Compatibility

Cable Type

Longest Lobea

 

 

 

 

 

 

 

 

 

IBM and IEEE

 

 

4 Mbps

802.5 Token

IBM Types 1

240 m (787 ft.)

 

Ring

 

 

 

 

 

 

 

IBM and IEEE

 

 

16 Mbps

802.5 Token

IBM Types 1

100 m (328 ft.)

 

Ring

 

 

 

 

 

 

a. To assure compatibility with future LANs, the longest lobe should be limited to 100 meters.

Token Ring Switch Module User Guide

Page 2-3

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Token Ring Switch Module Page Token Ring Switch Module User Guide FCC Notice Cabletron SYSTEMS, INC. Program License Agreement United States Government Restricted Rights Contents Contents Chapter Introduction Document Conventions Getting Help Related ManualsGeneral Description Standards ConnectorsLEDs Introduction Chapter Connecting to the NetworkPOWER-UP LED Sequence Unshielded Twisted Pair Typical ConfigurationsConnecting the Token Ring Module to a HUB Shielded Twisted Pair Connecting a Token Ring Module to a UTP HubConnecting a Token Ring Module to an STP MAU Chapter Configuring LCM Commands Connecting the LCMTransparent Setting the Ring SpeedConfiguring the Bridging Type Segment Number Source Routing and SRTBridging Method Translation Options Bridge NumberARP Translation IPX Translation Source Routing ARP TranslationAppleTalk Translation ATX translate 4-6 apple on Configuring Token Ring Switch Module User Guide Displaying Port Status Chapter StatisticsStatistics Displaying Port Status Destination Addresses and Forwarding Outcomes Module StatisticsModule Statistics Statistics Token Ring Switch Module User Guide Power-up Tests Chapter Diagnostics and TroubleshootingPOWER-UP Diagnostics Loopback Tests Power-up ResultsOperational Diagnostics If the Module Fails to Power Up Diagnostic ResultsTroubleshooting Connectivity Problems Chapter ADDING/SWAPPING Modules Unpacking the Token Ring Switch ModuleAdding a Token Ring Switch Module Adding/Swapping Modules Swapping a Module Token Ring Switch Module User Guide TCP/IP IPX Appendix a Technical SpecificationsDB9 for STP RJ45 for UTP Overview Appendix B Bridging MethodsAppendix B Bridging Methods Transparent BridgingFigure B-1 Source Routing Example Source Routing BridgingB-4 Token Ring Switch Module User Guide Source Routing Transparent Bridging B-6 Token Ring Switch Module User Guide ATX IndexIndex Index-2 Token Ring Switch Module User Guide

3T02-04 specifications

Cabletron Systems, a notable name in the networking industry, gained prominence for its pioneering products and innovative technologies. One of its formidable offerings is the Cabletron Systems 3T02-04, an advanced network switching device designed to cater to the evolving demands of high-performance networking environments.

The Cabletron Systems 3T02-04 excels in facilitating seamless data transfer within various network infrastructures. At its core, this device is engineered with key features that enhance its performance and adaptability. With a robust switching architecture, it provides high throughput and low latency, ensuring efficient handling of data traffic. This is particularly crucial for organizations that rely on rapid communication and data exchange for their operations.

One of the defining characteristics of the 3T02-04 is its multi-port configuration, which allows multiple devices to connect simultaneously. This enables the device to support a wide range of applications, from standard office networking to intensive data center operations. Equip with support for various data transmission protocols, including Ethernet, the 3T02-04 is highly versatile, meeting the diverse needs of modern networking tasks.

Additionally, Cabletron Systems incorporated advanced technologies such as Virtual LAN (VLAN) support in the 3T02-04, enhancing network segmentation and improving security measures. This feature allows network administrators to partition the network into different segments, ensuring that sensitive data remains separate and secure from other less critical services.

The 3T02-04 is also notable for its scalability. As organizations grow and their networking requirements evolve, the 3T02-04 can adapt. This scalability is crucial for businesses looking to future-proof their infrastructure investments, allowing them to add bandwidth and enhance connectivity without a complete overhaul of their existing systems.

Moreover, the robustness and reliability of the device ensure that it can withstand the rigors of demanding environments. Its durable design and comprehensive management features enable efficient monitoring and maintenance.

In conclusion, the Cabletron Systems 3T02-04 stands out as a powerful and versatile networking solution that combines cutting-edge technologies, multi-port capabilities, VLAN support, and excellent scalability, making it a valuable asset for any organization aiming to optimize its network infrastructure.
Top Page Image Contents