Cabletron Systems 3T02-04 Setting the Ring Speed, Configuring the Bridging Type, Transparent

Page 21

Setting the Ring Speed

3.4 SETTING THE RING SPEED

Before the Token Ring module can be connected to a network, the ring speed must be set. Token Ring signaling takes place at either 4 or 16 Mbps. The default setting is for 4 Mbps. All stations on the same ring must operate at the same speed.

!

CAUTION

A single station configured to the wrong speed may bring down the entire ring, therefore, the ATX should be configured to the appropriate speed before physically connecting it to the network.

Using LCM, at the ATX> prompt, type ringspeed followed by the port number and the desired speed. For example, to set port 9 to 16 Mbps type:

ATX> ringspeed 9 16

The LCM displays 16000000 bits/second.

If set to 4 Mbps, LCM displays 4000000 bits/second.

The Token Ring modules include an LED for each Token Ring port that indicates for which speed the port is configured. If the port is configured for 16 Mbps, the LED will be on; if configured for 4 Mbps, the LED will be off. For Token Ring Switch Modules, set each port’s ring speed, if necessary.

3.5 CONFIGURING THE BRIDGING TYPE

3.5.1Transparent

The ATX defaults to transparent bridging for all ports. If this is acceptable, no further configuration is necessary.

Token Ring Switch Module User Guide

Page 3-3

Image 21
Contents Token Ring Switch Module Page Token Ring Switch Module User Guide FCC Notice Cabletron SYSTEMS, INC. Program License Agreement United States Government Restricted Rights Contents Contents Chapter Introduction Document Conventions Getting Help Related ManualsGeneral Description Standards ConnectorsLEDs Chapter Connecting to the Network POWER-UP LED SequenceIntroduction Typical Configurations Connecting the Token Ring Module to a HUBUnshielded Twisted Pair Shielded Twisted Pair Connecting a Token Ring Module to a UTP HubConnecting a Token Ring Module to an STP MAU Chapter Configuring LCM Commands Connecting the LCMSetting the Ring Speed Configuring the Bridging TypeTransparent Source Routing and SRT Bridging MethodSegment Number Translation Options Bridge NumberARP Translation IPX Translation Source Routing ARP TranslationAppleTalk Translation ATX translate 4-6 apple on Configuring Token Ring Switch Module User Guide Displaying Port Status Chapter StatisticsStatistics Displaying Port Status Destination Addresses and Forwarding Outcomes Module StatisticsModule Statistics Statistics Token Ring Switch Module User Guide Chapter Diagnostics and Troubleshooting POWER-UP DiagnosticsPower-up Tests Power-up Results Operational DiagnosticsLoopback Tests Diagnostic Results TroubleshootingIf the Module Fails to Power Up Connectivity Problems Unpacking the Token Ring Switch Module Adding a Token Ring Switch ModuleChapter ADDING/SWAPPING Modules Adding/Swapping Modules Swapping a Module Token Ring Switch Module User Guide TCP/IP IPX Appendix a Technical SpecificationsDB9 for STP RJ45 for UTP Overview Appendix B Bridging MethodsAppendix B Bridging Methods Transparent BridgingFigure B-1 Source Routing Example Source Routing BridgingB-4 Token Ring Switch Module User Guide Source Routing Transparent Bridging B-6 Token Ring Switch Module User Guide ATX IndexIndex Index-2 Token Ring Switch Module User Guide

3T02-04 specifications

Cabletron Systems, a notable name in the networking industry, gained prominence for its pioneering products and innovative technologies. One of its formidable offerings is the Cabletron Systems 3T02-04, an advanced network switching device designed to cater to the evolving demands of high-performance networking environments.

The Cabletron Systems 3T02-04 excels in facilitating seamless data transfer within various network infrastructures. At its core, this device is engineered with key features that enhance its performance and adaptability. With a robust switching architecture, it provides high throughput and low latency, ensuring efficient handling of data traffic. This is particularly crucial for organizations that rely on rapid communication and data exchange for their operations.

One of the defining characteristics of the 3T02-04 is its multi-port configuration, which allows multiple devices to connect simultaneously. This enables the device to support a wide range of applications, from standard office networking to intensive data center operations. Equip with support for various data transmission protocols, including Ethernet, the 3T02-04 is highly versatile, meeting the diverse needs of modern networking tasks.

Additionally, Cabletron Systems incorporated advanced technologies such as Virtual LAN (VLAN) support in the 3T02-04, enhancing network segmentation and improving security measures. This feature allows network administrators to partition the network into different segments, ensuring that sensitive data remains separate and secure from other less critical services.

The 3T02-04 is also notable for its scalability. As organizations grow and their networking requirements evolve, the 3T02-04 can adapt. This scalability is crucial for businesses looking to future-proof their infrastructure investments, allowing them to add bandwidth and enhance connectivity without a complete overhaul of their existing systems.

Moreover, the robustness and reliability of the device ensure that it can withstand the rigors of demanding environments. Its durable design and comprehensive management features enable efficient monitoring and maintenance.

In conclusion, the Cabletron Systems 3T02-04 stands out as a powerful and versatile networking solution that combines cutting-edge technologies, multi-port capabilities, VLAN support, and excellent scalability, making it a valuable asset for any organization aiming to optimize its network infrastructure.