Cabletron Systems 3T02-04 manual ARP Translation

Page 24

Chapter 3: Configuring

ATX> translate

To display the translations that have been activated for indicated ports, enter translate followed by a Token Ring port range. For example:

ATX> translate 2-4

To display the options that are available for the specified translation type, enter:

ATX> translate port range translation type

Token Ring ports may have any combination of the different translation types. To enable the translation type in the manner specified by option for the indicated ports, enter:

ATX> translate {port range} {translation type} option

To disable all translation types for the indicated ports enter:

ATX> translate {port range} none

3.6.1ARP Translation

The ARP translation options are intended to compensate for any likely implementation of IP's ARP on 802.5 Token Rings. The possibilities for option are the following:

Off – no special ARP translation to be performed

Bitswap1 – embedded MAC addresses for ARP packets with hardware type 1 (Ethernet) will be bit swapped (this applies to all ARP packets received by the port, and to all ARP packets to be transmitted by the port).

Bitswap6 – embedded MAC addresses for ARP packets with hardware type 6 (IEEE 802) will be bit swapped (this applies to all ARP packets received by the port, and to all ARP packets to be transmitted by the port).

Bitswap61 – both type 1 and type 6 ARP packets will be bit swapped.

Oneto6 – incoming type 6 ARP packets will be changed to type 1 and outgoing type 1 ARP packets will be changed to type 6, both without bit swapping.

Page 3-6

Token Ring Switch Module User Guide

Image 24
Contents Token Ring Switch Module Page Token Ring Switch Module User Guide FCC Notice Cabletron SYSTEMS, INC. Program License Agreement United States Government Restricted Rights Contents Contents Chapter Introduction Document Conventions Related Manuals Getting HelpGeneral Description Connectors StandardsLEDs Chapter Connecting to the Network POWER-UP LED SequenceIntroduction Typical Configurations Connecting the Token Ring Module to a HUBUnshielded Twisted Pair Connecting a Token Ring Module to a UTP Hub Shielded Twisted PairConnecting a Token Ring Module to an STP MAU Chapter Configuring Connecting the LCM LCM CommandsSetting the Ring Speed Configuring the Bridging TypeTransparent Source Routing and SRT Bridging MethodSegment Number Bridge Number Translation OptionsARP Translation Source Routing ARP Translation IPX TranslationAppleTalk Translation ATX translate 4-6 apple on Configuring Token Ring Switch Module User Guide Chapter Statistics Displaying Port StatusStatistics Displaying Port Status Module Statistics Destination Addresses and Forwarding OutcomesModule Statistics Statistics Token Ring Switch Module User Guide Chapter Diagnostics and Troubleshooting POWER-UP DiagnosticsPower-up Tests Power-up Results Operational DiagnosticsLoopback Tests Diagnostic Results TroubleshootingIf the Module Fails to Power Up Connectivity Problems Unpacking the Token Ring Switch Module Adding a Token Ring Switch ModuleChapter ADDING/SWAPPING Modules Adding/Swapping Modules Swapping a Module Token Ring Switch Module User Guide Appendix a Technical Specifications TCP/IP IPXDB9 for STP RJ45 for UTP Appendix B Bridging Methods OverviewTransparent Bridging Appendix B Bridging MethodsSource Routing Bridging Figure B-1 Source Routing ExampleB-4 Token Ring Switch Module User Guide Source Routing Transparent Bridging B-6 Token Ring Switch Module User Guide Index ATXIndex Index-2 Token Ring Switch Module User Guide

3T02-04 specifications

Cabletron Systems, a notable name in the networking industry, gained prominence for its pioneering products and innovative technologies. One of its formidable offerings is the Cabletron Systems 3T02-04, an advanced network switching device designed to cater to the evolving demands of high-performance networking environments.

The Cabletron Systems 3T02-04 excels in facilitating seamless data transfer within various network infrastructures. At its core, this device is engineered with key features that enhance its performance and adaptability. With a robust switching architecture, it provides high throughput and low latency, ensuring efficient handling of data traffic. This is particularly crucial for organizations that rely on rapid communication and data exchange for their operations.

One of the defining characteristics of the 3T02-04 is its multi-port configuration, which allows multiple devices to connect simultaneously. This enables the device to support a wide range of applications, from standard office networking to intensive data center operations. Equip with support for various data transmission protocols, including Ethernet, the 3T02-04 is highly versatile, meeting the diverse needs of modern networking tasks.

Additionally, Cabletron Systems incorporated advanced technologies such as Virtual LAN (VLAN) support in the 3T02-04, enhancing network segmentation and improving security measures. This feature allows network administrators to partition the network into different segments, ensuring that sensitive data remains separate and secure from other less critical services.

The 3T02-04 is also notable for its scalability. As organizations grow and their networking requirements evolve, the 3T02-04 can adapt. This scalability is crucial for businesses looking to future-proof their infrastructure investments, allowing them to add bandwidth and enhance connectivity without a complete overhaul of their existing systems.

Moreover, the robustness and reliability of the device ensure that it can withstand the rigors of demanding environments. Its durable design and comprehensive management features enable efficient monitoring and maintenance.

In conclusion, the Cabletron Systems 3T02-04 stands out as a powerful and versatile networking solution that combines cutting-edge technologies, multi-port capabilities, VLAN support, and excellent scalability, making it a valuable asset for any organization aiming to optimize its network infrastructure.