Cabletron Systems SmartCell 6A000 manual ELANType802.3 The default Ethernet is used

Page 32

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

2.Create an ELAN on your switch by executing the add elan command. The following is an example:

SmartCell ZX # add elan

ELANNumber(0) : 1 ￿use 1 instead of the default, (0)

ELANName(ELAN000) : Marketing ￿ELAN is named Marketing instead of the default, (ELAN000)

ConnectMethod(SVC):

ELANType(802.3) ￿< The default (Ethernet) is used

Multipoint(YES) :

MTU(1516) :

Distribute(PROXY) :

SmartCell ZX #

3.Create a client for the switch on the ELAN. For example, enter

SmartCell ZX # add laneclient

ClientNumber(0) : 1 < one is used instead of the default, (0)

LanName(ELAN001) : Marketing < ELAN name is Marketing, not the default, (ELAN001)

ServerType(LECS) :

ServerAddress() :

IPAddress() : 90.1.1.1 < IP address and subnet mask is assigned to the client

NetMask(255.0.0.0): 255.255.255.0

MTU(1516) :

SmartCell ZX #

NOTICE - 'ZLESSRV' LES Join 39:00:00:00:00:00:00:00:00:00:14:41:80:00:20:D4: 14:41:82:00

NOTICE - 'ZLESSRV' BUS Connect 39:00:00:00:00:00:00:00:00:00:14:41:80:00:20:D4: 14:41:82:00

Note When you create a client, it automatically finds the LECS address using ILMI.

Notice that as the newly created client becomes active, messages appear on the console indicating that the client has registered with the LAN Emulation Server (LES) and the Broadcast and Unknown Sever (BUS).

4.Enter the show client command to make certain that the client is operational.

SmartCell ZX # show client 1

LANE Client 1

============================================================================

Client State

: Operational

Client Address

: 39:00:00:00:00:00:00:00:00:00:14:41:80:00:20:D4:14:41:81:00

LAN Name

: Marketing

LECS Addr Source

: ILMI

LECS Address

: 39:00:00:00:00:00:00:00:00:00:14:41:80:00:20:D4:14:41:80:01

LES Address

: 39:00:00:00:00:00:00:00:00:00:14:41:80:00:20:D4:14:41:82:02

LAN Type

: 802.3

MTU

: 1516

IP Address

: 90.1.1.1

IP NetMask

: 255.255.255.0

SmartCell ZX #

Note While creating an ELAN client for the switch is not absolutely necessary, it does provide management connectivity with the switch over its ATM ports (instead of the Ethernet port). See Chapter 4, "Switch Administration."

5.Physically connect your end nodes and edge devices to the switch ports.

3-4 SmartCell 6A000 User Guide

Page 31 Page 33
Image 32
Page 31 Page 33
Contents SmartCell 6A000 User Guide Order number Part number 04-0045-01 Rev. aIi SmartCell 6A000 User Guide FCC Class a Notice Declaration of Conformity Addendum Safety Information Class 1 Laser Transceivers Fiber Optic Protective Caps Regulatory Compliance Summary Safety Revision History Table of Contents Troubleshooting Acronyms Index Table of Contents Xii SmartCell 6A000 User Guide List of Figures List of Figures Xiv SmartCell 6A000 User Guide List of Tables List of Tables Xvi SmartCell 6A000 User Guide Introduction Introduction SmartCell 6A000 User Guide Switch Installation and Setup Unpacking the SwitchInspecting the Switch Check Accessory Carton Contents6A000-04 and 6A000-02 front panels Installing the Switch Mbps STS-3c/STM-1 UTP5, 4 PortsInstalling the Switch Installing the SmartCell 6A000 Configuring the Switch Adapters provided for connecting to the switch6A000 console and network connections Using the Console Console CommandsEnter Adding and ModifyingClient UNIATMAddress 390000000000000000001441800020d414418000 Console HelpServerAddress 390000000000000000001441800020d414418001 IP Over ATM and Lane Creating AN IP Over ATM VlanATM Addressing for IP over ATM IpatmarpCreating AN Emulated LAN SmartCell ZX # add wellknownaddressELANType802.3 The default Ethernet is used ATM Addressing for LAN Emulation Elan1 ELANs Across Multiple SwitchesSwitch Clients Path /backdir/config-1 Switch AdministrationBacking UP and Restoring Switch Configuration Upgrading Operating Software Path server.imaUsing the df Command to Recover Setting UP RoutesUnsuccessful Update Iisp Routing Creating Iisp RoutesSmartCell ZX # show netprefix a4 ATMAdress 39000000000000000000144780 SW2s netprefixATMAdress 39000000000000000000144180 SW1s netprefix Iisp Routes Among Multiple SwitchesATMAdress 39000000000000000000141500 SW3s netprefix Default Iisp Routes Iisp routes between multiple switchesFor example, create a default Iisp route from port B1 Iisp Routes and Network Topology112255 112244 Routing LoopsSigConfig and PortAutoDetect with Iisp Routing UNI RoutesIisp Metrics and Load Sharing UNIATMAddress 440000000000000000001441800030E514418000IP Routing Logs and Alarms To see the route, enter the show route command on SW2Viewing and Filtering Messages How Log Messages and Alarm Messages DifferLog Message System Setting UP PVC Connections ConsoleConnecting to Local Client Through Point-to-Point PVC Point-to-Point PVCs100 10.1.1.0Point-to-Multipoint PVCs Non-zero VPIs Show vccmaskSmartCell ZX # set portconfig a1 SmartCell ZX # show portconfig a1Traffic Management Traffic Descriptors8000 5000Call Admission Control Policy Class of Service Queues # set cacparamsPortNumberALL Port ID Queue EFCI, EPD, and RM Thresholds Class of Service Queue Allocation GuidelinesSmartCell ZX # show switchtrafficcongestion Traffic Management Logprint off command TroubleshootingTroubleshooting IP Over ATM Troubleshooting LAN Emulation Global Congestion Troubleshooting CongestionDiagnosing Congestion Port Congestion Troubleshooting TroubleshootingCongestion Troubleshooting Congestion Front Panel Appendix a Features and SpecificationsHardware Components CPU Module Figure A-1 Front panelSwitch Modules MSM and ESM Input/Output Port ModulesModule TypeCharacteristics Port Numbering Figure A-3 Group and port identifiersFeatures Switch ModuleSignaling and Routing 3 I/O ModulesConnection Management LAN Servers and ClientsManagement ATM Forum LAN Emulation LanePhysical Specifications SpecificationsTechnical Specifications ATM Port Specifications Standards SpecificationsCPU Serial Port Pin-Out Descriptions RJ-45 DB-25 Pin Color DescriptionTable A-11 RJ-45 to DB-25 Adapter Modem Adapter Appendix A-12 SmartCell 6A000 User Guide Appendix B Smartcell 6A000 and Snmp Internet MIB HierarchyZeitnet Proprietary MIB Figure B-1 Internet MIB HierarchyInterpreting the Object Identifier Figure B-2 ZeitNet Private MIBsProprietary MIB Functions Console Commands That Affect the Agent Client for Snmp ManagementMIB Exceptions Non-ConformanceNot Supported SmartCell 6A000 User Guide Appendix B-7 Page FAX Service Electronic ServicesAppendix C Technical Support Telephone AssistanceRepair Services Hardware WarrantySoftware Warranty Appendix D Acronyms CAC CanCBR CcittDCC DTEDVT NETFCS FifoFTP IeeeIOM IP/ATMIPX ITU-TSSLES LeselanLIS LLCNetbeui NFSNIC NLSPDU PMDPMP PPDSaal SARSAR-PDU SBETaxi TCPTDM TftpVCC VCIVCL VlanAcronyms Appendix D-12 SmartCell 6A000 User Guide Add wellknownaddress command 3-6 Address IndexSetting up routes Vlan Index SmartCell 6A000 User Guide
Top Page Image Contents