Cabletron Systems 9000 manual Features

Page 11

Introduction

Features

Processor

The 9G421-02/9G429-02 is equipped with an advanced Intel i960 microprocessor. This microprocessor provides a platform for all management functions, such as Spanning Tree, RMON, and MIB support within a scalable RISC-Based architecture.

Fast Packet Switching

The 9G421-02/9G429-02 incorporates a hardware-based switch design referred to as the SmartSwitch ASIC, a collection of custom ASICs designed speciÞcally for high-speed switching.

Management

The 9G421-02/9G429-02 features SNMP for local and remote management. Local management is provided through the RS232 COM ports on the SmartSwitch 9000 Environmental Module using a standard VT220 terminal or emulator. Remote management is possible through CabletronÕs SPECTRUM or any SNMP- compliant management tool. Included as management features are the IETF Standard Management Information Base (MIBs) RMON (RFC 1271), IETF MIB II (RFC 1213), IETF Bridge MIB (RFC 1493), and a host of other Cabletron enterprise MIBs. The 9G421-02/9G429-02 also offers the user a wide variety of statistical network management information to enhance network planning and troubleshooting. This module provides information for each front panel Ethernet Gigabit port, including packet counts along with errored frame information, such as collisions, CRCs, and Giants, via a variety of industry-standard and private MIBs. Industry standard IEEE 802.1d bridging, including the Spanning Tree Algorithm, is supported.

Connectivity

The 9G421-02 has one interface to the INB and two front panel multimode Þber (MMF) cables connecting to SC connectors. The INB interface is a Þxed connection to the INB, allowing the 9G421-02 to communicate with other SmartSwitch 9000 modules supporting various LAN technologies including Token Ring, FDDI, Ethernet, WAN and ATM. Each front panel SC connector provides 1 Ethernet Gigabit connection. The 9G429-02 has one interface to the INB-B and two single mode Þber (SMF)/MMF SC connectors on the front panel of the module.

1-3

Image 11
Contents 9032344-02 Page Page Vcci Notice FCC NoticeIndustry Canada Notice Class 1 Laser Transceivers Safety InformationDeclaration of Conformity Addendum Contents CPU Chapter Lanview LEDs Appendix a SpecificationsIntroduction Introduction Features Related Manuals Your email address Getting HelpIntroduction Unpacking the Module Tools Needed9G421-02/9G429-02 Circuit Boards Physical LayoutDIP Switch User Accessible Daughterboard ComponentsSwitch Function Description Daughterboard Attached to the 9G421-02/9G429-02 Removing the Daughterboard from the MotherboardSMB-1 Prom Boot Prom Daughterboard Components Installing the Module into the SmartSwitch 9000 Chassis Installing the 9G421-02/9G429-02 Module Reset Switch Reset SwitchOperation SMB-10 Bus System Diagnostic ControllerSystem Management Buses SMB-1 BusINB Interface SecureFast SmartSwitch ArchitectureDC/DC Converter I960 Core Lanview LEDs 2lists the states of the INB Receive LED 4lists the states of the Port Receive LED Lanview LEDs Network Interfaces Technical SpecificationsMemory Regulatory Compliance ServiceEnvironment DimensionsWeight PhysicalSpecifications
Related manuals
Manual 26 pages 46.69 Kb Manual 14 pages 9.57 Kb