![](/images/new-backgrounds/1106657/106657201x1.webp)
APPLETALK ROUTING NETWORK
Configure the CyberSWITCH
CONFIGURING DEVICE INFORMATION
Select Security from the Main CFGEDIT Menu. The Security Menu will then be displayed as follows:
Security Menu:
1)Security Level
2)System Options and Information
3)Device Level Databases
4)User Level Databases (Enable/Disable)
5)
6)Network Login Information
Select function from above or <RET> for previous menu: 1
We need to configure device information for our remote device, SITE2. Remote devices are configured in the
After selecting Device Level Database(s) from the Security menu shown above, the following Device Level Database Menu will be displayed.
Device Level Database Menu:
1)
2)
3)
Select function from above or <RET> for previous menu: 1
Select
Device Table Menu: (Device = "SITE2")
1)ISDN
2)Frame Relay
3)X.25
4)Authentication
5)IP
6)IPX
7)AppleTalk
8)Bridging
9)POTS
10)Compression
Select function from above or <RET> for previous menu: 1
The three areas of information we must configure for device SITE2 are ISDN, Authentication, and AppleTalk. The following sections will help you configure each of these three areas for device SITE2.
CONFIGURING DEVICE SITE2’S ISDN INFORMATION
We will begin by specifying the type of device. This device is an ISDN device, so we will select ISDN from the Device Table Menu.
The ISDN Menu will then be displayed with preconfigured default values as shown below:
Small Office Remote Access Switch 101