EXAMPLE NETWORKS
We provide several example networks, beginning with a simple network and progressing to more complex networks. You may find the configuration instructions provided for each example helpful when configuring your own network.
We include the following chapters:
•Simple Remote Bridging Network
An example of a simple network using remote bridge devices to access a CyberSWITCH’s four basic rate lines.
•Remote Bridging Network with Security
A bridged network with Calling Line Id security and Bridge MAC Address security enabled. The network is configured with two devices. One device will be configured to require a Bridge MAC Address security password, and one device will not. This network uses BRI lines.
•IP Routing Network
An IP routing network with devices accessing the network from their homes.
•IP Routing Network with Remote Bridge Devices
A smart bridging interface to allow the two remote bridge devices to connect to an IP subnet. The CyberSWITCH treats these devices connected to the Smart Bridging network interface as if they were connected to the same Ethernet segment.
•IP Routing Network with PPP Devices
Uses IP routing to connect two of our products, both using PPP. Each system is on a separate LAN. The configuration for this network is designed to allow three different types of accesses.
•IPX Routing Network
A sample network using IPX protocol to communicate with remote bridges as well as a remote IPX router.
•AppleTalk Network
An AppleTalk network made up of two LANs, separated by the WAN.