Extron electronic manual ISM 824 Menu System, Menu button The Menu

Quick Start —

ISM 824 Integration Scaling Multiswitcher, continued

ISM 824 Menu System

The ISM 824 has a six level menu system. Access to each level and sub level is made by using the menu control buttons. MENU NEXT

• Menu button — The Menu

button enters and moves through the main menu system in the ISM.

•Next button — The Next button steps through the submenus in the ISM menu system or exits the menu system.

Each level has separate submenus, accessed by pressing the Next button. Within any submenu, pressing the Menu button takes the user back up a sub level.

Front panel security lockout (Executive mode)

The front panel security lockout limits some or all the operation of the ISM from the front panel. There are two levels of security available via the front panel; Executive modes 1 and 2.

•Executive Mode 1— View Mode. Complete front panel lockout except for viewing ties and unlocking View mode. No changes can be made and attempts result in the I/O buttons blinking twice.

•Executive Mode 2 — I/O ties only. Partial front panel lockout, allowing ties to

be changed, I/O presets recall, button

background illumination control, audio gain/attenuation control, and unlocking

sec.	Menu
30
			Configuration	Next Submenu
		Output Card

sec.	Menu
30
			Configuration	Next Submenu
		Input

sec. Menu
30	Next Submenu
Image
Auto
Menu
Default Cycle

Next			Menu
	NEXT
30sec.30 sec.	toExit			Next Submenu	inactivity,panelfrontofsecondswhile in any menu orsubmenu, thetorevertsandouttimesunitdefault display cycle.
	SystemMenu
	Press
Menu
	Reset
		Menu			0 After 30 the ISM
				Next Submenu
30 sec.	View
	Comm
	Settings

Executive 2 mode. Attempting other changes result in the I/O buttons and the Enter

button blinking twice.

To initiate or exit Executive Mode 1 or 2 follow the steps shown below:

Executive Mode 1

To initiate or exit:

Press and hold the Video and Audio buttons (2 seconds), until buttons blink twice. Release.

	I / O
VIDEO	AUDIO

On initiating,		On exiting,
the LCD displays	OR	the LCD displays
Executive Mode		Executive Mode
View mode		Off
Default		Default
Cycle		Cycle

Executive Mode 2

To initiate or exit:

Press and hold Enter, Video, and Audio buttons (2 seconds), until buttons blink twice.

	C O N T R O L				I / O
ENTER	PRESET	VIEW	ESC	VIDEO	AUDIO

On initiating,		On exiting,
the LCD displays	OR	the LCD displays
Executive Mode		Executive Mode

See chapter 3, “Operation and Setup”, “ISM 824 Menu System” section, for complete step-by-step information on configuring the ISM with the Menu System.

I/O Ties Only	Off
Default	Default
Cycle	Cycle

See chapter 3, “Operation and Setup”, “Front panel security lockout (Executive mode)” section, for further information.

QS-4 ISM 824 Integration Scaling Multiswitcher • Quick Start