Extron electronic IPL T S Series, IPL T SFI244 setup guide Global Configurator Application Screen

Figure 4. Global Configurator Application Screen

Using GC you can configure a single room controller or create a Web-based remote monitoring system for hundreds of A/V devices in multiple locations.

You can configure an IPL T controller using GC without having the device physically connected to the A/V network.

CAUTION: Use Global Configurator version 3.0 or later. Update all PCs and devices running earlier versions of GC.

NOTE: Ethernet driver support requires Global Configurator 3.0 and firmware version 1.15 or higher.

6 IPL T Series • Introduction