Extron electronic IPL T S Series, IPL T SFI244 setup guide COM4 9-pin D connector for serial port

gCOM4 — 9-pin D connector for serial port 4

hMAC address — The unique hardware ID number (MAC address) of the unit (for example, 00-05-A6-00-00-01)

IPL T SFI244

8			4
	IPL T S6
MAC: 00-05-A6-XX-XX-XX			COM1
S/N:
POWER	LAN		COM2
	COM3	COM4 COM5 COM6
12V

.5A MAX

	TX RX	TX RX TX RX	TX RX
1	2	3	5

6		4	5
	IPL T SFI244
MAC: 00-05-A6-XX-XX-XX
S/N:
POWER	LAN	FLEX I/O	IR
12V		COM1 COM2 1 2 3 4	1 2 3 4
.5A MAX

TX RX TX RX S G S G S G S G

1 2 3

a b c

d

e

f

Power connection — Connect the supplied 12 VDC power supply LAN port — RJ-45 receptacle for network connection

COM ports — 3.5 millimeter captive screw receptacles for serial ports COM1 and COM2

Flex I/O ports — Four ports that can be configured as digital inputs (for switches or sensors), digital outputs (for power, screen, or projector lift control), or analog inputs (for photo sensors or level feedback)

IR ports — 3.5 millimeter captive screw receptacles for infrared device connection

MAC address — The unique hardware ID number (MAC address) of the unit (for example, 00-05-A6-00-00-01)

IPL T CR48

5
IPL T CR48
MAC: 00-05-A6-XX-XX-XX		1	2	3	4
S/N:
POWER LAN	INPUT
			RELAY
12V
.5A MAX	1 2 3 4	5	6	7	8

1 2 3

4

a b c

d

e

Power connection — Connect the supplied 12 VDC power supply. LAN port — RJ-45 receptacle for network connection

Input (contact closure) ports — Four inputs permit connection of switches and sensors to provide input (trigger events) to the system.

Relay ports — Eight relay ports provide contact closure activation of relays (for power, screen projector lift control, and so on) when trigger events occur.

MAC address — The unique hardware ID number (MAC address) of the unit (for example, 00-05-A6-00-00-01)

12 IPL T Series • Setup