Extron electronic IPL T PC1i setup guide RS-232 port cabling, Download tab

Page 11

Hardware Setup, cont’d

RS-232 port cabling

To connect an output device, such as a plasma display or projector, to the PC1's RS-232 connector, see the Extron IP Link Device Interface Communication Sheet for your display device. This sheet contains information about your display device, including connector pin assignments and connection diagrams, and is available from the Extron Web site.

Accessing the Communication Sheet

To obtain the Communication Sheet for your output device,

1.

On the Extron Web site (www.extron.com), click the

 

Download tab.

2.

On the Download Center page, click

 

the Device Drivers button (shown at

 

right).

3.

At the bottom of the Device Drivers

 

page, select IPL T PC1 from the pull-

 

down menu.

4.

On the next page, select Serial from the Protocol Type

 

drop-down menu to display a list of the Extron serial

 

drivers.

5.

On the drivers list, locate the model name of your output

 

device. In the row for your device, click on the nnKb link

 

in the Communication Sheet column.

In the example below, the Communication sheet link for a 3M-7340 display has been selected.

6.

The Communication Sheet, a .pdf document, opens. You

 

can view, print, and/or download it.

7.

Wire your display device as described in its

 

Communication Sheet.

You can also access the Communication Sheets from the GC2.3 software by clicking the Comm Sheet button on the Serial Configuration tab. See "Assigning a serial driver" in chapter 3, "Software Setup," for more information.

Connecting to the display device

To connect the display device to the PC1,

1. Wire an RS-232 cable to the provided four-pin captive screw connector, as described below. Use only the first three pins of the connector, starting at left.

a. Connect the wire from the display's Receive port to the connector's first pin on the left, which plugs into the PC1's Tx (Transmit) port.

b. Connect the wire from the display's Transmit port to the connector's second pin, which plugs into the PC1's Rx (Receive) port.

c. Connect the ground wire from the display to the connector's third pin, which plugs into the PC1's ground () port.

RS-232

IPL T PC1

 

Rear Panel

Tx Rx +5V

RS-232 Port

 

Ground (

 

)

 

Ground (

 

)

 

 

 

 

Receive (Rx)

Receive (Rx)

Transmit (Tx)

Transmit (Tx)

 

 

 

 

 

 

 

BidirectionalDisplay

Device

d. Connect hand-shaking wires to the +5V port if needed.

2. Plug the cable into the RS-232 receptacle on the PC1 rear panel.

NThe RS-232 port is by default a control port. If you want to use it to configure the PC1, you must perform a mode 2 reset. Refer to “Resetting,” in chapter 3 of the IPL T PC1 User's Manual for this procedure.

2-6

IPL T PC1 Interface • Hardware Setup

IPL T PC1 Interface • Hardware Setup

2-7

Page 10 Page 12
Image 11
Page 10 Page 12
Contents IPL T PC1 and IPL T PC1i Setup Guide ChecklistExtron’s Warranty Precautions安全须知 中文 Table of Contents IPL T PC1 Table of Contents, cont’dAbout the IPL T PC1 About Global ConfiguratorIntroduction About this ManualSystem requirements Installing Global ConfiguratorClick the Global Configurator icon Introduction, cont’dIPL T PC1 TwoRear Panel Hardware SetupFront Panel Wiring the Local Area Network LAN port Hardware Setup, cont’dConnecting the Hardware Download tab RS-232 port cablingWiring the contact Input port Wiring for IR controlStep One Download device drivers Software SetupCreating a Global Configurator Project File Select Create a New Project Software Setup, cont’dStep Two Create a new project Step Three Add a device Select the Auto Configure IP Address check boxStep Four Define the location of the new device Step Five Save the new Global Configurator fileStep Seven Create e-mail messages Step Six Enter contactsClick Add Driver Step Nine Assign device driversCreate a group folder for your output device functions Step Ten Set scheduled actions and e-mail deliveries Click the Apply Email/Contacts button Step Eleven Set monitored conditions Building and Uploading a GC File Step Twelve Build the Global Configurator fileOr click the Build All Configurations icon shown at right Step Fourteen Change device settings if desired Step Thirteen Upload the Global Configurator fileHttp//12.113.184.57/nortxeindex.html Software Setup, cont’d Launching the GlobalViewer InterfaceStep Fifteen Launch GlobalViewer This page was intentionally left blank Software Setup, cont’d
Related manuals
Manual 2 pages 39.09 Kb Manual 78 pages 34.87 Kb

IPL T PC1, IPL T PC1i specifications

The Extron Electronics IPL T PC1 i and IPL T PC1 are advanced presentation and control processors designed for optimal efficiency in various audiovisual applications. These devices serve as integral components in many professional environments, offering sophisticated capabilities for managing and automating AV systems.

Both models feature a robust, intuitive user interface that simplifies the management of complex audiovisual setups. The IPL T PC1 i and IPL T PC1 enable seamless integration with a variety of control systems, enhancing the user experience and providing streamlined operation. With their scalable design, these devices can cater to the needs of small conference rooms to large auditoriums, making them versatile solutions for diverse applications.

One standout feature of the IPL T PC1 i is its support for Extron's GUI Designer software. This powerful tool allows users to create customized graphical user interfaces tailored to specific AV systems, ensuring that control remains user-friendly and accessible. The IPL T PC1 i also supports a wide range of communication protocols, including Ethernet, RS-232, and USB, which facilitates compatibility with multiple devices and technologies.

Both models are equipped with advanced signal processing capabilities. They offer support for high-resolution video formats, ensuring that presentations and multimedia displays maintain their quality. Options for signal routing and switching further enhance the functionality of the devices, allowing for dynamic and adaptive presentations.

The IPL T PC1 i and IPL T PC1 also feature built-in scheduling and automation capabilities. Users can program specific tasks, such as turning systems on or off, adjusting volume levels, and changing input sources, at predetermined times. This feature maximizes efficiency, minimizes the need for manual intervention, and ensures that AV systems are ready when needed.

In terms of physical design, both models are compact and rack-mountable, allowing for easy installation in equipment racks or dedicated AV cabinets. They also include comprehensive diagnostic tools for troubleshooting and system monitoring, ensuring optimal performance and reliability.

Overall, the Extron Electronics IPL T PC1 i and IPL T PC1 stand out as reliable, feature-rich solutions for managing AV systems in a variety of settings, making them a popular choice among AV professionals and institutions alike. Their blend of adaptability, user interface design, and robust signal processing capabilities positions them as leaders in the AV control market.
Top Page Image Contents