Extron electronic IPL T PC1i setup guide Introduction, About this Manual, About the IPL T PC1

Page 6

Introduction

About this Manual

This setup guide describes the following:

•The IPL T PC1/PC1i products

•The Global Configurator application

•The IPL T PC1 hardware installation

•The IPL T PC1 software configuration

About the IPL T PC1

The Extron IPL T PC1 and IPL T PC1i are Extron IP Link Power Control Interfaces. They are Ethernet-based power management devices that control and schedule AC power on and off. The PC1 and PC1i ports include a LAN port, a bidirectional RS-232 port, an IR output port, and a contact closure input port, providing integration of power control, serial device control, IR device control, and input sensing in a single device that can be easily mounted behind a display device or kiosk.

The PC1 can be used as a stand-alone control device or as one of many nodes in a distributed control system environment. The PC1 has its own Web pages, stored in flash memory.

The IPL T PC1i is an international version, configured for

220 VAC. Unless otherwise specified, “IPL T PC1” and “PC1” refer to both product versions throughout this guide.

About Global Configurator

Global Configurator (GC) is a software application that gives you the ability to create a single configuration file of all of the controlled devices on an audio/video (A/V) network.

There are two types of devices in an A/V system:

Controllers — Control devices that have an IP Link enabled Ethernet port for network connectivity to serial, contact input, and infrared (IR) ports to communicate with A/V devices.

Controlled devices — Audio/video products, such as video projectors, displays, VCRs, DVD players, document cameras, projector screens, and room lighting systems — all of the equipment that is used to generate an audio/video presentation.

Once a "global" configuration file is built, GC2.3 then generates a graphical user interface called GlobalViewer that allows you to monitor and control all of the A/V devices contained within the GC2.3 configuration file. When the configuration file is created, one or more of the IP Link controllers on the network can be designated as a GlobalViewer host device.

The completed configuration file is uploaded to the host device(s). You can then launch the GlobalViewer interface by opening an Internet browser on a local PC and entering the host device’s IP address in the browser address field.

AC Power

RS-232

LAN

 

 

Hz

 

 

 

 

 

 

50/60

 

 

 

 

 

100-120V

 

 

 

 

 

Extron

 

 

 

 

 

MAX

 

 

 

 

TPUT

15A

 

 

 

 

ER OU

 

 

 

 

POW

 

 

IPL T PC1

 

 

 

 

 

15A

MAX

 

 

 

 

Power Control

 

ON

 

Kiosk

InterfaceButton

Plasma

Display

DVD

Extron

IR Emitter

TCP/IP

Remote User

Network

Control and

 

Administrator

 

Monitoring

Ethernet

A typical IPL T PC1 Interface application

1-2 IPL T PC1 • Introduction

Global Configurator application screen example

IPL T PC1 • Introduction

1-3

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Setup Guide Checklist IPL T PC1 and IPL T PC1iPrecautions Extron’s Warranty安全须知 中文 Table of Contents Table of Contents, cont’d IPL T PC1About this Manual About Global ConfiguratorIntroduction About the IPL T PC1Introduction, cont’d Installing Global ConfiguratorClick the Global Configurator icon System requirementsTwo IPL T PC1Hardware Setup Front PanelRear Panel Hardware Setup, cont’d Connecting the HardwareWiring the Local Area Network LAN port RS-232 port cabling Download tabWiring for IR control Wiring the contact Input portSoftware Setup Creating a Global Configurator Project FileStep One Download device drivers Software Setup, cont’d Step Two Create a new projectSelect Create a New Project Select the Auto Configure IP Address check box Step Three Add a deviceStep Five Save the new Global Configurator file Step Four Define the location of the new deviceStep Six Enter contacts Step Seven Create e-mail messagesStep Nine Assign device drivers Click Add DriverCreate a group folder for your output device functions Step Ten Set scheduled actions and e-mail deliveries Click the Apply Email/Contacts button Step Eleven Set monitored conditions Step Twelve Build the Global Configurator file Or click the Build All Configurations icon shown at rightBuilding and Uploading a GC File Step Thirteen Upload the Global Configurator file Step Fourteen Change device settings if desiredSoftware Setup, cont’d Launching the GlobalViewer Interface Step Fifteen Launch GlobalViewerHttp//12.113.184.57/nortxeindex.html This page was intentionally left blank Software Setup, cont’d
Related manuals
Manual 2 pages 39.09 Kb Manual 78 pages 34.87 Kb

IPL T PC1, IPL T PC1i specifications

The Extron Electronics IPL T PC1 i and IPL T PC1 are advanced presentation and control processors designed for optimal efficiency in various audiovisual applications. These devices serve as integral components in many professional environments, offering sophisticated capabilities for managing and automating AV systems.

Both models feature a robust, intuitive user interface that simplifies the management of complex audiovisual setups. The IPL T PC1 i and IPL T PC1 enable seamless integration with a variety of control systems, enhancing the user experience and providing streamlined operation. With their scalable design, these devices can cater to the needs of small conference rooms to large auditoriums, making them versatile solutions for diverse applications.

One standout feature of the IPL T PC1 i is its support for Extron's GUI Designer software. This powerful tool allows users to create customized graphical user interfaces tailored to specific AV systems, ensuring that control remains user-friendly and accessible. The IPL T PC1 i also supports a wide range of communication protocols, including Ethernet, RS-232, and USB, which facilitates compatibility with multiple devices and technologies.

Both models are equipped with advanced signal processing capabilities. They offer support for high-resolution video formats, ensuring that presentations and multimedia displays maintain their quality. Options for signal routing and switching further enhance the functionality of the devices, allowing for dynamic and adaptive presentations.

The IPL T PC1 i and IPL T PC1 also feature built-in scheduling and automation capabilities. Users can program specific tasks, such as turning systems on or off, adjusting volume levels, and changing input sources, at predetermined times. This feature maximizes efficiency, minimizes the need for manual intervention, and ensures that AV systems are ready when needed.

In terms of physical design, both models are compact and rack-mountable, allowing for easy installation in equipment racks or dedicated AV cabinets. They also include comprehensive diagnostic tools for troubleshooting and system monitoring, ensuring optimal performance and reliability.

Overall, the Extron Electronics IPL T PC1 i and IPL T PC1 stand out as reliable, feature-rich solutions for managing AV systems in a variety of settings, making them a popular choice among AV professionals and institutions alike. Their blend of adaptability, user interface design, and robust signal processing capabilities positions them as leaders in the AV control market.
Top Page Image Contents