Extron electronic IPL T PC1i setup guide Step Nine Assign device drivers, Click Add Driver

Page 18

Software Setup, cont’d

4.

Repeat steps 2 and 3 to create additional e-mail messages

 

as needed.

5.

When finished adding e-mail messages, click Done.

Step Eight: Enter output receptacle and contact input port labels.

If you want to change the labels that will appear on the Power Receptacle Configuration and Contact Input Configuration screens in GlobalViewer, select the Power/Contact Input Cfg tab.

Type in your changes in the available fields:

•Power Receptacle label — In the Power Receptacle Configuration field, enter a name for the PC1's output receptacle. (The default label is "Receptacle 1.")

•Contact Input label — In the Contact Input Configuration field, enter names for the contact input port and for its open and closed (shorted to ground) conditions. (The default name label for this port is "Contact Input 1"; the labels for its two possible conditions are "Open" and "Closed.") The Mode label reflects the port setup and cannot be changed.

Step Nine: Assign device drivers.

The Serial Configuration tab and the IR Configuration tab allow you to assign a device driver to the PC1 serial and/or IR port.

Assigning a serial driver

1.

In the IP Link tree area, click on a serial port name.

 

The Serial Configuration tab is displayed

2.

In the Serial Driver Selection field, select a device type,

 

manufacturer, and version from the drop-down boxes.

3.

Select an available driver.

 

If desired, you can click the Comm Sheet button to view a

 

Communication Sheet with information about your device.

4.

Click Add Driver.

3-12 IPL T PC1 Interface • Software Setup

IPL T PC1 Interface • Software Setup 3-13

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Setup Guide Checklist IPL T PC1 and IPL T PC1iPrecautions Extron’s Warranty安全须知 中文 Table of Contents Table of Contents, cont’d IPL T PC1About this Manual About Global ConfiguratorIntroduction About the IPL T PC1Introduction, cont’d Installing Global ConfiguratorClick the Global Configurator icon System requirementsTwo IPL T PC1Hardware Setup Front PanelRear Panel Hardware Setup, cont’d Connecting the HardwareWiring the Local Area Network LAN port RS-232 port cabling Download tabWiring for IR control Wiring the contact Input portSoftware Setup Creating a Global Configurator Project FileStep One Download device drivers Software Setup, cont’d Step Two Create a new projectSelect Create a New Project Select the Auto Configure IP Address check box Step Three Add a deviceStep Five Save the new Global Configurator file Step Four Define the location of the new deviceStep Six Enter contacts Step Seven Create e-mail messagesStep Nine Assign device drivers Click Add DriverCreate a group folder for your output device functions Step Ten Set scheduled actions and e-mail deliveries Click the Apply Email/Contacts button Step Eleven Set monitored conditions Step Twelve Build the Global Configurator file Or click the Build All Configurations icon shown at rightBuilding and Uploading a GC File Step Thirteen Upload the Global Configurator file Step Fourteen Change device settings if desiredSoftware Setup, cont’d Launching the GlobalViewer Interface Step Fifteen Launch GlobalViewerHttp//12.113.184.57/nortxeindex.html This page was intentionally left blank Software Setup, cont’d
Related manuals
Manual 2 pages 39.09 Kb Manual 78 pages 34.87 Kb

IPL T PC1, IPL T PC1i specifications

The Extron Electronics IPL T PC1 i and IPL T PC1 are advanced presentation and control processors designed for optimal efficiency in various audiovisual applications. These devices serve as integral components in many professional environments, offering sophisticated capabilities for managing and automating AV systems.

Both models feature a robust, intuitive user interface that simplifies the management of complex audiovisual setups. The IPL T PC1 i and IPL T PC1 enable seamless integration with a variety of control systems, enhancing the user experience and providing streamlined operation. With their scalable design, these devices can cater to the needs of small conference rooms to large auditoriums, making them versatile solutions for diverse applications.

One standout feature of the IPL T PC1 i is its support for Extron's GUI Designer software. This powerful tool allows users to create customized graphical user interfaces tailored to specific AV systems, ensuring that control remains user-friendly and accessible. The IPL T PC1 i also supports a wide range of communication protocols, including Ethernet, RS-232, and USB, which facilitates compatibility with multiple devices and technologies.

Both models are equipped with advanced signal processing capabilities. They offer support for high-resolution video formats, ensuring that presentations and multimedia displays maintain their quality. Options for signal routing and switching further enhance the functionality of the devices, allowing for dynamic and adaptive presentations.

The IPL T PC1 i and IPL T PC1 also feature built-in scheduling and automation capabilities. Users can program specific tasks, such as turning systems on or off, adjusting volume levels, and changing input sources, at predetermined times. This feature maximizes efficiency, minimizes the need for manual intervention, and ensures that AV systems are ready when needed.

In terms of physical design, both models are compact and rack-mountable, allowing for easy installation in equipment racks or dedicated AV cabinets. They also include comprehensive diagnostic tools for troubleshooting and system monitoring, ensuring optimal performance and reliability.

Overall, the Extron Electronics IPL T PC1 i and IPL T PC1 stand out as reliable, feature-rich solutions for managing AV systems in a variety of settings, making them a popular choice among AV professionals and institutions alike. Their blend of adaptability, user interface design, and robust signal processing capabilities positions them as leaders in the AV control market.
Top Page Image Contents