Extron electronic MTP SW6 user manual Switch mode SW6, Lock executive modes, Resets

Page 24

3-	Command/response table for SIS commands (continued)
12
	Command	ASCII Command Response		Additional description
MTP		(host to unit)	(unit to host)
	Switch mode
SW6 •	Set normal (manual)	1#	F1]	The user selects inputs manually, from the front panel or
	switch mode			under remote control.
	Set auto switch mode	2#	F2]	The switcher automatically switches to the highest
Remote				numbered input with signals present. Manual switching
Remote				is disabled.
				is disabled.
	Lock (executive) modes
Control	Lock front panel	1X	Exe1]	Enable Lock mode 1.
Control	functions
	functions
	Unlock front panel	0X	Exe0]	Enable Lock mode 0.
	functions
	View lock status	X	X1#]

	N X1#= Front panel lock		0 = off (unlocked)
			1 = on (locked)

Command/response table for SIS commands (continued)

Command	ASCII Command	Response	Additional description
	(host to unit)	(unit to host)
Resets
Reset all level and	EZT}	Zpt]	Clear all level and peaking adjustments to their default
peaking adjustments			(0) values.
Reset all skew	EZK}	Zpk]	Clear all input and output skew values to 0 ns.
adjustments
Reset audio input levels	EZA}	Zpa]	Reset all audio input levels (gain and attenuation) to 0 dB.
Reset audio output level	EZV}	Zpv]	Reset the audio output levels (volume) to 100% (no
			attenuation).
Reset whole switcher	EZXXX}	Zpx]	Clear all ties and presets, reset all audio gains to 0 dB,
			and reset volume to 100%.

MTP SW6 • Remote Control 3-13

Remote Control, cont’d

Image 24

Contents MTP SW6 Precautions Extron’s Warranty安全须知中文 FCC Class a NoticeTable of Contents Table of Contents, cont’d Appendix a Reference InformationAbout the MTP SW6 Switcher IntroductionRS-232 function Introduction, cont’d Twisted Pair TP Cable Advantages Transmission distanceMTP SW6 Introduction MTP SW6 Introduction, cont’dInstallation and Operation Mounting the SwitcherTabletop use Rack shelf mountingInstallation and Operation, cont’d MTP SW6 Installation and OperationFurniture mounting Installation and Operation, cont’d Connectors and Settings DC power connector Plug the external 12 VDC power supplyInto this 2-pole captive screw connector. See Power supply Power supply wiring Making connectionsRJ-45 Connector TP cable terminationOperation Receiver considerationsSwitch mode Delay Adjust skew adjustment control This controlInstallation and Operation, cont’d Optimizing the Video Level/peaking settingSkew delay compensation Three Remote Control Symbol definitionsSimple Instruction Set Control Host-to-interface communicationsRemote Control, cont’d Error responsesTimeout Using the command/response tableCommand/response table for SIS commands Level adjustmentPeaking adjustment Input selectionSkew adjustment RS-232 insert enableAudio/RS-232 TP input wire pair 3 and 6 configuration RemoteLocal audio output volume Audio or RS-232 mute commandsAudio input gain and attenuation SW6 Switch mode SW6 ResetsLock executive modes VX!AX!FX1$VmtX1#AmtX1#ExeX1# Information requestsInstalling the software Windows-Based Program ControlUsing the software Using the help systemRemote Control, cont’d Contact Closure Remote Control IR 102 Infrared Remote ControlSpecifications Reference InformationAccessories Reference Information, cont’dPart Numbers Included partsConnectors Connector Part numberCables Enhanced Skew-Free A/V cable Part number