Extron electronic MTP SW6 user manual Skew adjustment, RS-232 insert enable, Remote

3-	Command/response table for SIS commands (continued)
8
	Command	ASCII Command		Response	Additional description
MTP		(host to unit)		(unit to host)
	Skew adjustment
SW6	Set all skew adjustment	EX!*X%*X%*X%Iseq}			Set a specific skew adjustment for the TP input. X%
	values for an input	E2*0*0*4Iseq}		IseqX!*X%*X%*X%]	values are listed in RGB order.
•	Example:			Iseq02*00*00*04]	Set input 2’s skew settings as follows:
Remote					Blue = 8 ns (delayed 8 ns).
					Red = 0 ns
					Green = 0 ns
Control	Increment one input's	EX!*X^+Iseq}		IseqX!*X%*X%*X%]	Increase input X!'s X^plane’s skew adjustment by 1 step
	Decrement one input's	EX!*X^-Iseq}		IseqX!*X%*X%*X%]	Decrease input X!'s X^plane’s skew adjustment by
	skew adjustment value				(2 ns).
	skew adjustment value				1 step (2 ns).
	Example:	E2*2*-Iseq}		Iseq02*00*00*03]	Decrease input 2’s blue skew by 2 ns to 6 ns.
	Read input skew	EX!Iseq}		X%*X%*X%]
	adjustment values
	N X!= Input number		1 – 6
	X%= Skew adjustment range		00 – 31 (each step = 2ns)
	X^= Video plane		0 = red

1 = green

2 = blue

Command/response table for SIS commands (continued)

Command	ASCII Command	Response	Additional description
	(host to unit)	(unit to host)
RS-232 insert enable
Disable the RS-232 insert	E1*0Lrpt}	Lrpt0]	Disable the RS-232 insert.
Enable the RS-232 insert	E1*1Lrpt}	Lrpt1]	Enable the RS-232 insert.
Read the RS-232 insert	E1Lrpt}	X&]	Show the status of the RS-232 insert.
status

Audio/RS-232 TP input (wire pair 3 and 6) configuration

NThe RS-232 insert, when enabled (E1*1Lrpt}), overrides the audio/RS-232 TP input configurations.

	Configure input as	X!*0\	TypX!*0]		Define the audio/RS-232 input as audio, such as
	audio				provided by an MTP 15HD A transmitter.
MTP	Configure input as	X!*1\	TypX!*1]		Define the audio/RS-232 input as bidirectional serial
	RS-232				communications, such as provided by an MTP 15HD RS
					transmitter.
SW6	Read TP input	X!\	X*]		Show the audio/RS-232 wire pair input definition.
	configuration
•
Remote	N X&= RS-232 output insert status		0	= disabled
	X!= Input number		1	= enabled
			1 – 6
	X*= Audio/RS-232 wire pair input type		0	= audio
Control
			1	= RS-232
3-9

Remote Control, cont’d