Extron electronic MSW 4SV RS, MSW 4V rs manual Mounting, Tabletop Placement

Mounting

This section outlines the various options for mounting the MSW 4V rs and MSW 4SV rs:

•Tabletop Placement

•Rack Mounting

•Under-desk Mounting

Tabletop Placement

Attach the four provided rubber feet to the bottom of the unit and place it in any suitable location.

Rack Mounting the MSW 4V rs and MSW 4SV rs

Underwriters Laboratories Guidelines for Rack Mounting

The following Underwriters Laboratories (UL) guidelines are relevant to the safe installation of these products in a rack:

Elevated operating ambient temperature — If the unit is installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient temperature. Therefore, install the equipment in an environment compatible with the maximum ambient temperature (Tma: +122 °F, +45 °C) specified by Extron.

Reduced air flow — Install the equipment in the rack so that the equipment gets adequate air flow for safe operation.

Mechanical loading — Mount the equipment in the rack so that uneven mechanical loading does not create a hazardous condition.

Circuit overloading — Connect the equipment to the supply circuit and consider the effect that circuit overloading might have on overcurrent protection and supply wiring. Give appropriate consideration to the equipment nameplate ratings when addressing this concern.

Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted equipment. Pay particular attention to supply connections other than direct connections to the branch circuit (such as the use of power strips).

MSW 4V rs and MSW 4SV rs • Mounting 21