VTG 200
VTG 200 Control Program
The VTG 200 Control Program is a
•Remote control of the VTG 200 scan rate and test pattern
•Listing VTG 200 scan rates and details of those rates
•Adding new rates into the VTG 200 (one at a time)
•Restoring, updating, or saving all scan rates for the VTG 200
Installing the Software
The program is contained on a single 3.5” diskette and will run from the floppy drive. However, it is more convenient to load and run it from the hard drive. It can be installed on the user’s
1. Insert the Extron software diskette into the floppy drive.
2. From the Windows File menu, click on Run.
3. Specify the disk drive and type “setup”. For example, type
A:SETUP 
if the diskette is in drive A.
The program will occupy approximately 1 MB of hard drive space.
The Windows installation will create (by default) a C:\VTG200 directory and will place 2 icons (VTG 200 Control Program and VTG 200 Help) into a group titled “Extron Electronics”. See figure
Using the Software
1. For information about program features, double click on the VTG 200 Help icon in the Extron Electronics group. Help can be accessed from its icon
2. To run the software, double click on the VTG 200 Control Program icon in the Extron Electronics group.
3. A Comm menu will be displayed on the screen. (See Figure
4. The Extron VTG 200 Control Program window displays available scan rates and test patterns, and the program awaits user action (see figure
Clicking the “Rate VIEW” option with rate #61 selected as shown will produce the screen shown in figure
Figure 5-8 illustrates using the control program to select a scan rate and pattern, which is displayed on the monitor being tested.
VTG 200
Figure 5-6A ↑
Figure 5-6B ↑
Figure 5-6C ↑
Page | Extron • VTG 150 & VTG 200 • User’s Manual | Extron • VTG 150 & VTG 200 • User’s Manual | Page |