Extron electronic HSA 222C, HSA 200SE user manual Preparing the table with a router

Page 10

Installation, cont’d

Preparing the Table and Mounting the Enclosure

The preferred and recommended method for preparing the table is to use the appropriate Extron routing template and a router. The templates are available at no cost; see the part numbers for the templates in appendix A, “Reference Information”.

For an HSA 200C, HSA 200CE, or HSA 222C unit (US version only), another preferred method is to use a 6" hole saw.

Alternatively, for any model, you can use a paper cut-out template (see a ppendix A, “Reference Information”) and a sabre saw or keyhole saw, but this method is not recommended.

CAUTION

The opening in the table for the HSA enclosure

 

should be cut only by licensed and bonded

 

craftspeople. Exercise care to prevent scarring or

 

damaging the furniture.

 

The routing templates for the various HSA models

 

are not interchangeable. If you use the wrong

 

template, you will cut an improperly-sized hole. If

 

you use a larger template than required, the cut will

 

result in gaps in the table surface on either side of

 

the enclosure.

 

The surfaces of the HSA enclosure have screws and

 

other protruding hardware that could damage fine

 

furniture. Do not rest the enclosure on unprotected

 

furniture.

Preparing the table with a router

1.

Locate the desired mounting location on the tabletop or

 

other installation surface. Mark the location.

2.

Place the mounting template assembly on the table,

 

centered on the mounting location. Angle the template for

 

the optimum positioning. If necessary, use a square to

 

ensure that the template is properly positioned. Extron is

 

not responsible for improperly-positioned HSA products.

 

 

Ensure that only the wooden strips contact the

 

CAUTION

 

 

furniture. Failure to do so may mar the furniture.

3.

Once the template assembly is positioned properly, secure

 

the assembly to the table with clamps (figure 2-2).

Figure 2-2 — Cutting the opening with a router (example)

4.

Using a router with a 5/8" (or 16 mm) outside diameter

 

guide bushing and a 1/2" (or 12 mm or 12.7 mm)

 

diameter straight router bit, carefully cut the opening in

 

the table surface (figure 2-2).

 

 

 

 

Wear safety glasses when operating the router.

 

 

 

 

 

 

 

 

Failure to comply can result in eye injury.

5.

Remove the clamps and the routing template.

The routing template is reusable. Do not discard the template when the installation is complete. Save it to install other HSA products of the same size.

2-4

HSA 200/222 Series • Installation

HSA 200/222 Series • Installation

2-5

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Hideaway Surface Access Products Extron’s Warranty PrecautionsFCC Class a Notice Page Table of Contents One HSA 200/222 Series Surface Access ProductsTable of Contents, cont’d IntroductionAbout the Hideaway Surface Access Products IntroductionAll models FeaturesAbout the Extender board line driver HSA 200CE and HSA 200SE models onlyIntroduction HSA 200/222 Series Surface Access Products InstallationTwo Installation Overview InstallationPreparing the Routing Template Preparing the table with a router Installation, cont’d Installing the HSA enclosure allHSA 200C and HSA 200S no Extender board only Underside Features and Cabling ConnectionsAll HSA 200 models only Overtightening the Philips head screws on the screwAll HSA 200 and HSA 222 models HSA 200CE and HSA 200SE Extender board onlyFront Panel Connectors Power connector wiring14 Audio input connector plug If the image does not appear or there is no sound Maintenance and ModificationsThree If the image is not displayed correctlyRemoving and Replacing the Enclosure Maintenance and ModificationsReplacing the Bezels Maintenance and Modifications, cont’d While youRemoving the front panel Procedure Ensure that AC power is disconnected beforeWhen the HSA 200 is upside-down, the latch may Servicing the HSA unitFront access panel removal HSA 222 models Adjusting the Top Panel Removing and Replacing the Enclosure , steps 7 throughAAppendix a Reference InformationSpecifications Reference InformationReference Information, cont’d Surface cutout dimensions here before cutting a holeGeneral HSA Part Numbers HSA 200C/HSA 200CE international circular modelsTop Plate Dimensions Replacement PartsAccessories Reference Information, cont’d Included PartsAppendix B Packaging for ShipmentPackaging for Shipment Packaging for Shipment, cont’d Figure B-4 HSA unit suspended in the foam
Related manuals
Manual 30 pages 943 b

HSA 200SE, HSA 200S, HSA 222C specifications

Extron Electronics is renowned for its innovative solutions that enhance multimedia environments. The HSA 200S, HSA 222C, and HSA 200SE are impressive audio solutions designed for varied applications, providing high-quality audio performance and flexibility.

The Extron HSA 200S is a versatile standalone audio amplifier engineered for professional AV systems. One of its main features is its capability to deliver 200 watts of power, making it suitable for medium to large spaces. It utilizes Class D amplification technology, which ensures high efficiency and low heat generation. The HSA 200S offers a range of input options, including balanced and unbalanced audio inputs, enabling seamless integration with various audio sources. Additionally, this amplifier has built-in DSP (Digital Signal Processing) that allows for equalization and dynamic range compression, ensuring optimal audio quality across different environments.

The HSA 222C takes versatility a step further. This compact amplifier features 2-channel output and can deliver up to 20 watts per channel. It is particularly well-suited for smaller environments such as classrooms and huddle spaces. The HSA 222C also boasts an integrated mixer, which allows users to combine multiple audio sources effortlessly. The amplifier includes features like automatic gain control and priority mute, providing enhanced control over audio levels for more dynamic presentations.

The Extron HSA 200SE is another significant model in this range, amplifying 200 watts of output power, similar to the HSA 200S but with additional capabilities. It supports both stereo and mono audio outputs, making it ideal for various configurations within an AV system. The HSA 200SE incorporates advanced heat management technologies, allowing for extended usage without overheating. This model also includes RS-232 control for integration into larger control systems, offering remote management for convenient audio regulation.

All three models reflect Extron's commitment to quality and user-friendly design. They come equipped with features that ensure reliable performance, such as thermal protection, short circuit protection, and a rugged chassis for increased durability. These amplifiers not only cater to modern audio needs but also align with Extron's overarching philosophy of providing the most efficient, high-performance solutions for audio visual applications. Whether for a large auditorium or a small meeting room, the HSA series delivers exceptional sound clarity and adaptability, making them a go-to choice for AV professionals.
Top Page Image Contents