Extron electronic HSA 222C, HSA 200SE user manual Reference Information, Specifications

Page 24

Reference Information

Specifications

Video — HSA 200SE, HSA 200CE

Gain

Selectable: unity (0.7 V), (0.75 V) 50%, (0.8 V)

 

100%

Bandwidth

300 MHz (-3 dB)

ID bits are terminated on pins 4 and 11.

Video input — HSA 200S, HSA 200C

Number/signal type ....

1 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs

Connectors

(1) 15-pin HD female

Video input — HSA 200SE, HSA 200CE

Number/signal type ....

1 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs

Connectors

(1) 15-pin HD female

Nominal level

0.7 Vp-p for RGB

Min./max. levels

Analog: 0.3 V to 1.5 Vp-p with no offset at unity

 

gain

Impedance

75 ohms

Horizontal frequency ...

15 kHz to 135 kHz

Vertical frequency

30 Hz to 170 Hz

Video output — HSA 200S, HSA 200C

Number/signal type ....

1 pass-through VGA–UXGA RGBHV, RGBS,

 

RGsB, RsGsBs

Connectors

5 BNC female on pigtails

Video output — HSA 200SE, HSA 200CE

Number/signal type ....

1 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs

Connectors

5 BNC female on pigtails

Nominal level

0.7 Vp-p for RGB

Min./max. levels

Analog: 0.3 V to 1.5 Vp-p

Impedance

75 ohms

DC offset

±5 mV with input at 0 offset

Sync — HSA 200SE, HSA 200CE

Input type

RGBHV, RGBS, RGsB, RsGsBs

Output type

RGBHV, RGBS, RGsB, RsGsBs

Input level

2.0 V to 5.0 Vp-p

Output level

TTL: 5.0 Vp-p, unterminated

Input impedance

510 ohms

Output impedance

75 ohms

Max. propagation delay

18.8 ns

Max. rise/fall time

4 ns

Polarity

Positive or negative (follows input)

Audio — HSA 200SE, HSA 200CE

Gain

Unbalanced output: 0 dB; balanced output: +6 dB

Frequency response

20 Hz to 20 kHz, ±0.5 dB

THD + Noise

0.025% @ 1 kHz, 0.020% @ 20 kHz at nominal

 

level

S/N

>90 dB at rated maximum output (21 dB,

 

balanced)

Stereo channel separation >75 dB @ 20 Hz to 20 kHz

Audio input — HSA 200S, HSA 200C

Number/signal type ....

1 stereo, unbalanced

Connectors

(1) 3.5 mm stereo female jack

Audio input — HSA 200SE, HSA 200CE

Number/signal type ....

1 stereo, unbalanced

Connectors

(1) 3.5 mm stereo female jack

Impedance

>10k ohms unbalanced, DC coupled

Nominal level

-10 dBV (316 mVrms)

Maximum level

+6 dBu, (balanced or unbalanced) at 1%THD+N

Audio output — HSA 200S, HSA 200C

Number/signal type ....

1 pass-through stereo, unbalanced

Connectors

(1) 3.5 mm, direct insertion captive screw

 

connector, 3 pole

Audio output — HSA 200SE, HSA 200CE

Number/signal type ....

1 stereo, balanced/unbalanced

Connectors

(1) 3.5 mm direct insertion captive screw

 

connector, 5 pole

Impedance

50 ohms unbalanced, 100 ohms balanced

Nominal level

Unbalanced output: -10 dBV (316 mVrms)

 

Balanced output: -2 dBu (632 mVrms)

Max. level (Hi-Z)

>+14 dBu, balanced at 1% THD+N

Max. level (600 ohm) ....

>+5.5 dBm, balanced at 1% THD+N

0 dBu = 0.775 Vrms. 0 dBV = 1 Vrms. 0 dBV 2 dBu.

A-2

HSA 200/222 Series • Reference Information

HSA 200/222 Series • Reference Information

A-3

Image 24
Contents Hideaway Surface Access Products Precautions Extron’s WarrantyFCC Class a Notice Page Table of Contents HSA 200/222 Series Surface Access Products Table of Contents, cont’dOne IntroductionAbout the Hideaway Surface Access Products IntroductionFeatures About the Extender board line driverAll models HSA 200CE and HSA 200SE models onlyInstallation Introduction HSA 200/222 Series Surface Access ProductsTwo Installation Installation OverviewPreparing the Routing Template Preparing the table with a router Installation, cont’d Installing the HSA enclosure allUnderside Features and Cabling Connections All HSA 200 models onlyHSA 200C and HSA 200S no Extender board only Overtightening the Philips head screws on the screwAll HSA 200 and HSA 222 models HSA 200CE and HSA 200SE Extender board onlyFront Panel Connectors Power connector wiring14 Audio input connector plug Maintenance and Modifications ThreeIf the image does not appear or there is no sound If the image is not displayed correctlyMaintenance and Modifications Removing and Replacing the EnclosureReplacing the Bezels Maintenance and Modifications, cont’d While youRemoving the front panel Ensure that AC power is disconnected before When the HSA 200 is upside-down, the latch mayProcedure Servicing the HSA unitFront access panel removal HSA 222 models Adjusting the Top Panel Removing and Replacing the Enclosure , steps 7 throughAAppendix a Reference InformationSpecifications Reference InformationSurface cutout dimensions here before cutting a hole Reference Information, cont’dGeneral HSA Part Numbers HSA 200C/HSA 200CE international circular modelsReplacement Parts AccessoriesTop Plate Dimensions Reference Information, cont’d Included PartsAppendix B Packaging for ShipmentPackaging for Shipment Packaging for Shipment, cont’d Figure B-4 HSA unit suspended in the foam
Related manuals
Manual 30 pages 943 b

HSA 200SE, HSA 200S, HSA 222C specifications

Extron Electronics is renowned for its innovative solutions that enhance multimedia environments. The HSA 200S, HSA 222C, and HSA 200SE are impressive audio solutions designed for varied applications, providing high-quality audio performance and flexibility.

The Extron HSA 200S is a versatile standalone audio amplifier engineered for professional AV systems. One of its main features is its capability to deliver 200 watts of power, making it suitable for medium to large spaces. It utilizes Class D amplification technology, which ensures high efficiency and low heat generation. The HSA 200S offers a range of input options, including balanced and unbalanced audio inputs, enabling seamless integration with various audio sources. Additionally, this amplifier has built-in DSP (Digital Signal Processing) that allows for equalization and dynamic range compression, ensuring optimal audio quality across different environments.

The HSA 222C takes versatility a step further. This compact amplifier features 2-channel output and can deliver up to 20 watts per channel. It is particularly well-suited for smaller environments such as classrooms and huddle spaces. The HSA 222C also boasts an integrated mixer, which allows users to combine multiple audio sources effortlessly. The amplifier includes features like automatic gain control and priority mute, providing enhanced control over audio levels for more dynamic presentations.

The Extron HSA 200SE is another significant model in this range, amplifying 200 watts of output power, similar to the HSA 200S but with additional capabilities. It supports both stereo and mono audio outputs, making it ideal for various configurations within an AV system. The HSA 200SE incorporates advanced heat management technologies, allowing for extended usage without overheating. This model also includes RS-232 control for integration into larger control systems, offering remote management for convenient audio regulation.

All three models reflect Extron's commitment to quality and user-friendly design. They come equipped with features that ensure reliable performance, such as thermal protection, short circuit protection, and a rugged chassis for increased durability. These amplifiers not only cater to modern audio needs but also align with Extron's overarching philosophy of providing the most efficient, high-performance solutions for audio visual applications. Whether for a large auditorium or a small meeting room, the HSA series delivers exceptional sound clarity and adaptability, making them a go-to choice for AV professionals.