Extron electronic HSA 200SE, HSA 222C Installation, cont’d, Installing the HSA enclosure all

Page 11

Installation, cont’d

Preparing the table with a hole saw (HSA 200C, HSA 200CE, or HSA 222C—US version only)

1.

Locate the desired mounting location on the tabletop or

 

other installation surface. Mark the 6" circle, then find the

 

center and mark it as well.

 

 

 

 

 

Wear safety glasses when operating the hole saw.

 

 

 

 

 

 

 

 

 

Failure to comply can result in eye injury.

2.

Using a 6" hole saw on a portable drill, cut the mounting

 

hole at the desired location (figure 2-3). Extron is not

 

responsible for improperly positioned HSA products.

 

 

 

Use a portable drill with sufficient power for the 6"

 

CAUTION

 

 

 

 

 

 

hole saw. Exercise caution when handling the drill

 

 

 

 

 

and hole saw. Care should be taken to protect the

 

 

 

 

 

surface of the tabletop, podium, or other mounting

 

 

 

 

 

surface from damage.

2.

Remove the plastic strips that protect the corners of the

 

enclosure. If a sticky residue remains, remove it with an

 

appropriate metal cleaning product.

 

 

Do not use isopropyl alcohol or other solvents to clean

 

CAUTION

 

 

the HSA. Strong solvents will ruin some finishes.

3.

Carefully lower the HSA enclosure into the hole to test the

 

fit. If necessary, remove the enclosure and use a file or

 

rasp to enlarge or smooth the edges of the opening.

4.

From the underside of the table, reinstall the screw clamps

 

on the enclosure at a height at which the clamp will reach

 

the underside of the tabletop (figure 2-4).

Figure 2-4 shows an HSA 200 installation. Except for the video and audio connectors, the HSA 222 installation is identical.

Figure 2-3 — Cutting the opening with a hole saw

Installing the HSA enclosure (all)

1. Remove the screw clamps (2) on the sides of the enclosure.

CAUTION

The flanged edges of the top of the surface enclosure

 

are bevelled to an ultra-fine thickness of less than

 

0.04 (4/100)" (approximately 1 mm), and are

Power Cord

2 RJ-45 Connectors

Audio Cable (HSA 200 models only)

Extron

HSA 200

Hideaway Surface

Access Enclosure

Output BNC

Connectors

(HSA 200 models only)

Mounting

Surface

Screw Clamp

Display BNC

Connectors

(HSA 200 models only)

therefore very sharp. These edges are also soft and

may be easily nicked or bent. Exercise caution

when handling and mounting the enclosure.

Mishandling may result in injury to the installer or

damage the appearance of the enclosure.

Figure 2-4 — Mounting the HSA 200 or HSA 222 enclosure

2-6

HSA 200/222 Series • Installation

HSA 200/222 Series • Installation

2-7

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Hideaway Surface Access Products FCC Class a Notice PrecautionsExtron’s Warranty Page Table of Contents Introduction HSA 200/222 Series Surface Access ProductsTable of Contents, cont’d OneIntroduction About the Hideaway Surface Access ProductsHSA 200CE and HSA 200SE models only FeaturesAbout the Extender board line driver All modelsTwo InstallationIntroduction HSA 200/222 Series Surface Access Products Preparing the Routing Template InstallationInstallation Overview Preparing the table with a router Installing the HSA enclosure all Installation, cont’dOvertightening the Philips head screws on the screw Underside Features and Cabling ConnectionsAll HSA 200 models only HSA 200C and HSA 200S no Extender board onlyHSA 200CE and HSA 200SE Extender board only All HSA 200 and HSA 222 modelsPower connector wiring Front Panel Connectors14 Audio input connector plug If the image is not displayed correctly Maintenance and ModificationsThree If the image does not appear or there is no soundReplacing the Bezels Maintenance and ModificationsRemoving and Replacing the Enclosure While you Maintenance and Modifications, cont’dRemoving the front panel Servicing the HSA unit Ensure that AC power is disconnected beforeWhen the HSA 200 is upside-down, the latch may ProcedureFront access panel removal HSA 222 models Removing and Replacing the Enclosure , steps 7 through Adjusting the Top PanelReference Information AAppendix aReference Information SpecificationsGeneral Surface cutout dimensions here before cutting a holeReference Information, cont’d HSA 200C/HSA 200CE international circular models HSA Part NumbersReference Information, cont’d Included Parts Replacement PartsAccessories Top Plate DimensionsPackaging for Shipment Appendix BPackaging for Shipment Figure B-4 HSA unit suspended in the foam Packaging for Shipment, cont’d
Related manuals
Manual 30 pages 943 b

HSA 200SE, HSA 200S, HSA 222C specifications

Extron Electronics is renowned for its innovative solutions that enhance multimedia environments. The HSA 200S, HSA 222C, and HSA 200SE are impressive audio solutions designed for varied applications, providing high-quality audio performance and flexibility.

The Extron HSA 200S is a versatile standalone audio amplifier engineered for professional AV systems. One of its main features is its capability to deliver 200 watts of power, making it suitable for medium to large spaces. It utilizes Class D amplification technology, which ensures high efficiency and low heat generation. The HSA 200S offers a range of input options, including balanced and unbalanced audio inputs, enabling seamless integration with various audio sources. Additionally, this amplifier has built-in DSP (Digital Signal Processing) that allows for equalization and dynamic range compression, ensuring optimal audio quality across different environments.

The HSA 222C takes versatility a step further. This compact amplifier features 2-channel output and can deliver up to 20 watts per channel. It is particularly well-suited for smaller environments such as classrooms and huddle spaces. The HSA 222C also boasts an integrated mixer, which allows users to combine multiple audio sources effortlessly. The amplifier includes features like automatic gain control and priority mute, providing enhanced control over audio levels for more dynamic presentations.

The Extron HSA 200SE is another significant model in this range, amplifying 200 watts of output power, similar to the HSA 200S but with additional capabilities. It supports both stereo and mono audio outputs, making it ideal for various configurations within an AV system. The HSA 200SE incorporates advanced heat management technologies, allowing for extended usage without overheating. This model also includes RS-232 control for integration into larger control systems, offering remote management for convenient audio regulation.

All three models reflect Extron's commitment to quality and user-friendly design. They come equipped with features that ensure reliable performance, such as thermal protection, short circuit protection, and a rugged chassis for increased durability. These amplifiers not only cater to modern audio needs but also align with Extron's overarching philosophy of providing the most efficient, high-performance solutions for audio visual applications. Whether for a large auditorium or a small meeting room, the HSA series delivers exceptional sound clarity and adaptability, making them a go-to choice for AV professionals.
Top Page Image Contents