Extron electronic HSA 222C, HSA 200SE user manual Adjusting the Top Panel

Page 22

Maintenance and Modifications, cont’d

Remove pivot nut.

Remove gas lift.

Figure 3-9 — Replacing the gas lift, HSA 222 model

9. Insert the piston end of the replacement gas lift through the hole in the bottom of the enclosure adjacent to the latch and secure the lift in the clevis on the top panel with the nut and bolt that were removed in step 8.

10. (HSA 200 models only) Replace the front panel in the surface mount enclosure and secure it in place with the hex head screws removed in step 6.

11. (HSA 222 models only) Replace the front access panel in the surface mount enclosure and secure it in place with the Philips head screws removed in step 7.

12. Thread the pivot nut on the gas lift mounting plate onto

the shaft of the gas lift and tighten it several turns.

13. Firmly push the gas lift mounting plate into position on the underside of the surface mount enclosure, engaging the three mounting screws that were loosened in step 2. Holding the plate in position with one hand, secure it to the enclosure with the three screws.

14. Reinstall the surface mount enclosure. See “Removing and Replacing the Enclosure”, steps 6 through 11.

Adjusting the Top Panel

Level the top panel of the HSA 200 or HSA 222 as follows:

1.

If necessary to view the top and the underside of the

 

enclosure simultaneously, remove the surface mount

 

enclosure from the table. See Removing and Replacing the

 

Enclosure, steps 1 through 4.

2.

Close and latch the top panel.

3.

Slightly loosen the two latch locking screws (figure 3-10)

 

on the underside of the surface mount enclosure. These

 

screws lock the latch in place once it is adjusted.

Adjustment

Screw

 

Latch Locking

 

Screws

Figure 3-10 — Adjusting the top panel

4.

Gently turn the adjustment screw on the rear of the surface

 

mount enclosure to raise or lower the top panel to level it

 

with the flange. Turning the screw counterclockwise raises

 

the panel and clockwise lowers the panel.

5.

Once the top panel is level, tighten the two latch locking

 

screws on the underside of the surface mount enclosure.

6.

If the surface mount enclosure was removed, reinstall it. See

 

Removing and Replacing the Enclosure, steps 7 through 11.

3-12 HSA 200/222 Series • Maintenance and Modifications

HSA 200/222 Series • Maintenance and Modifications 3-13

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Hideaway Surface Access Products Extron’s Warranty PrecautionsFCC Class a Notice Page Table of Contents One HSA 200/222 Series Surface Access ProductsTable of Contents, cont’d IntroductionAbout the Hideaway Surface Access Products IntroductionAll models FeaturesAbout the Extender board line driver HSA 200CE and HSA 200SE models onlyIntroduction HSA 200/222 Series Surface Access Products InstallationTwo Installation Overview InstallationPreparing the Routing Template Preparing the table with a router Installation, cont’d Installing the HSA enclosure allHSA 200C and HSA 200S no Extender board only Underside Features and Cabling ConnectionsAll HSA 200 models only Overtightening the Philips head screws on the screwAll HSA 200 and HSA 222 models HSA 200CE and HSA 200SE Extender board onlyFront Panel Connectors Power connector wiring14 Audio input connector plug If the image does not appear or there is no sound Maintenance and ModificationsThree If the image is not displayed correctlyRemoving and Replacing the Enclosure Maintenance and ModificationsReplacing the Bezels Maintenance and Modifications, cont’d While youRemoving the front panel Procedure Ensure that AC power is disconnected beforeWhen the HSA 200 is upside-down, the latch may Servicing the HSA unitFront access panel removal HSA 222 models Adjusting the Top Panel Removing and Replacing the Enclosure , steps 7 throughAAppendix a Reference InformationSpecifications Reference InformationReference Information, cont’d Surface cutout dimensions here before cutting a holeGeneral HSA Part Numbers HSA 200C/HSA 200CE international circular modelsTop Plate Dimensions Replacement PartsAccessories Reference Information, cont’d Included PartsAppendix B Packaging for ShipmentPackaging for Shipment Packaging for Shipment, cont’d Figure B-4 HSA unit suspended in the foam
Related manuals
Manual 30 pages 943 b

HSA 200SE, HSA 200S, HSA 222C specifications

Extron Electronics is renowned for its innovative solutions that enhance multimedia environments. The HSA 200S, HSA 222C, and HSA 200SE are impressive audio solutions designed for varied applications, providing high-quality audio performance and flexibility.

The Extron HSA 200S is a versatile standalone audio amplifier engineered for professional AV systems. One of its main features is its capability to deliver 200 watts of power, making it suitable for medium to large spaces. It utilizes Class D amplification technology, which ensures high efficiency and low heat generation. The HSA 200S offers a range of input options, including balanced and unbalanced audio inputs, enabling seamless integration with various audio sources. Additionally, this amplifier has built-in DSP (Digital Signal Processing) that allows for equalization and dynamic range compression, ensuring optimal audio quality across different environments.

The HSA 222C takes versatility a step further. This compact amplifier features 2-channel output and can deliver up to 20 watts per channel. It is particularly well-suited for smaller environments such as classrooms and huddle spaces. The HSA 222C also boasts an integrated mixer, which allows users to combine multiple audio sources effortlessly. The amplifier includes features like automatic gain control and priority mute, providing enhanced control over audio levels for more dynamic presentations.

The Extron HSA 200SE is another significant model in this range, amplifying 200 watts of output power, similar to the HSA 200S but with additional capabilities. It supports both stereo and mono audio outputs, making it ideal for various configurations within an AV system. The HSA 200SE incorporates advanced heat management technologies, allowing for extended usage without overheating. This model also includes RS-232 control for integration into larger control systems, offering remote management for convenient audio regulation.

All three models reflect Extron's commitment to quality and user-friendly design. They come equipped with features that ensure reliable performance, such as thermal protection, short circuit protection, and a rugged chassis for increased durability. These amplifiers not only cater to modern audio needs but also align with Extron's overarching philosophy of providing the most efficient, high-performance solutions for audio visual applications. Whether for a large auditorium or a small meeting room, the HSA series delivers exceptional sound clarity and adaptability, making them a go-to choice for AV professionals.
Top Page Image Contents