Extron electronic HSA 222C, HSA 200SE user manual All HSA 200 and HSA 222 models

Page 13

Installation, cont’d

All HSA 200 and HSA 222 models

4Screw clamp bracket/screw clamp — These two brackets/ clamps hold the enclosure firmly in place in the mounting hole.

5AC power input connection — Connect this cord to the power source.

For US-domestic versions, this power cord is permanently connected to the HSA. Connect the power cord to a 125VAC, 60 Hz, 5A power source.

For international versions, this power cord is a removable IEC power cord. Connect the cord to a 220-240V, 50/60 Hz, 5A power source.

You can replace this connector with an optional Extron HSA 200/ HSA 222 Flexible Conduit Adapter kit (part #70-229-01).

6RJ-45 connectors — Plug one end of a CAT 5 or CAT 6 twisted pair (TP) cable into each of these RJ-45 female connectors. Connect the other end to an appropriate telecommunications or data network or to an Extron TP product.

All RJ-45 connectors are teminated in accordance with the TIA/EIA 568 A standard.

An RJ-11 plug can be connected to the RJ-45 jack.

When cabling the front panel and the underside of the enclosure (figure 2-8), ensure that the bottom RJ-45 connections match up with the front panel RJ-45 connector locations. For example, match the front panel RJ-45 (CAT 6) network, data, or communications connection 5A with the underside RJ-45

connector 6A , match 5B with 6B and so forth.

5A

5B Front View

6A 6B

Bottom View

Figure 2-8 — Configuration of RJ-45 connectors

2-10 HSA 200/222 Series • Installation

7Latch locking screws — These screws secure the latching mechanism to the enclosure. They must be loosened in order to adjust the top surface (see “Adjusting the Top Panel” in chapter 3) with the top surface adjustment screw 8 .

8Top surface adjustment screw — After loosening the latch locking screws 7 , adjust the top surface of the tilt up panel with this screw. Tighten the latch locking screws after adjustment.

9Gas lift mounting plate — The lower end of the gas lift is attached to this plate. The plate must be detached from the enclosure in order to remove the gas lift.

HSA 200CE and HSA 200SE (Extender board) only

10Audio output connection — This 5-pole direct insertion terminal outputs unbalanced or balanced audio. Figure 2-9 shows how to wire the connector.

Unbalanced Output

Balanced Output

 

Tip

L

 

Tip

L

 

+

Audio

+

Audio

Tip

+

Tip

+

See Caution

L

 

Ring

L

 

-

 

-

 

Sleeve (s)

 

 

Sleeve (s)

 

 

See Caution

R

 

Ring

R

 

-

 

-

 

 

R

 

 

R

 

Figure 2-9 — Extender board audio connector wiring

 

 

 

MEDIUM

 

Connect the sleeve to

Peaking and Gain

CAUTION

NORMAL

 

 

 

 

 

 

 

 

MAXIMUM

 

 

 

 

 

 

 

 

 

ground (Gnd).

Unity Gain

 

 

 

 

 

 

 

 

Peaking and

 

Connecting the sleeve to a

 

 

 

 

 

 

 

 

Gain

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

negative (-) terminal will

 

 

 

 

 

 

 

 

 

 

damage the audio output circuits.

 

 

 

 

 

 

 

 

 

11Gain switch — To compensate for cable resistance and capacitance, use a Tweeker to slide this switch to select the level of video gain that yields the sharpest, smear-free picture.

Normal — unity gain (no signal boost) Medium — mid-level peaking and gain

Maximum — maximum amount of peaking and gain. Select this setting for use with longer cables.

Adjust the gain before installing the HSA unit, as the gain switch may be inaccessible after installation.

12Power supply connection — Plug the external power supply (included) output wires into this 2-pole direct insertion terminal. See “Power connector wiring” to wire the connector.

13 Power LED — Indicates when the Extender board is receiving power.

HSA 200/222 Series • Installation 2-11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Hideaway Surface Access Products Extron’s Warranty PrecautionsFCC Class a Notice Page Table of Contents Table of Contents, cont’d HSA 200/222 Series Surface Access ProductsOne IntroductionIntroduction About the Hideaway Surface Access ProductsAbout the Extender board line driver FeaturesAll models HSA 200CE and HSA 200SE models onlyIntroduction HSA 200/222 Series Surface Access Products InstallationTwo Installation Overview InstallationPreparing the Routing Template Preparing the table with a router Installing the HSA enclosure all Installation, cont’dAll HSA 200 models only Underside Features and Cabling ConnectionsHSA 200C and HSA 200S no Extender board only Overtightening the Philips head screws on the screwHSA 200CE and HSA 200SE Extender board only All HSA 200 and HSA 222 modelsPower connector wiring Front Panel Connectors14 Audio input connector plug Three Maintenance and ModificationsIf the image does not appear or there is no sound If the image is not displayed correctlyRemoving and Replacing the Enclosure Maintenance and ModificationsReplacing the Bezels While you Maintenance and Modifications, cont’dRemoving the front panel When the HSA 200 is upside-down, the latch may Ensure that AC power is disconnected beforeProcedure Servicing the HSA unitFront access panel removal HSA 222 models Removing and Replacing the Enclosure , steps 7 through Adjusting the Top PanelReference Information AAppendix aReference Information SpecificationsReference Information, cont’d Surface cutout dimensions here before cutting a holeGeneral HSA 200C/HSA 200CE international circular models HSA Part NumbersAccessories Replacement PartsTop Plate Dimensions Reference Information, cont’d Included PartsPackaging for Shipment Appendix BPackaging for Shipment Figure B-4 HSA unit suspended in the foam Packaging for Shipment, cont’d
Related manuals
Manual 30 pages 943 b

HSA 200SE, HSA 200S, HSA 222C specifications

Extron Electronics is renowned for its innovative solutions that enhance multimedia environments. The HSA 200S, HSA 222C, and HSA 200SE are impressive audio solutions designed for varied applications, providing high-quality audio performance and flexibility.

The Extron HSA 200S is a versatile standalone audio amplifier engineered for professional AV systems. One of its main features is its capability to deliver 200 watts of power, making it suitable for medium to large spaces. It utilizes Class D amplification technology, which ensures high efficiency and low heat generation. The HSA 200S offers a range of input options, including balanced and unbalanced audio inputs, enabling seamless integration with various audio sources. Additionally, this amplifier has built-in DSP (Digital Signal Processing) that allows for equalization and dynamic range compression, ensuring optimal audio quality across different environments.

The HSA 222C takes versatility a step further. This compact amplifier features 2-channel output and can deliver up to 20 watts per channel. It is particularly well-suited for smaller environments such as classrooms and huddle spaces. The HSA 222C also boasts an integrated mixer, which allows users to combine multiple audio sources effortlessly. The amplifier includes features like automatic gain control and priority mute, providing enhanced control over audio levels for more dynamic presentations.

The Extron HSA 200SE is another significant model in this range, amplifying 200 watts of output power, similar to the HSA 200S but with additional capabilities. It supports both stereo and mono audio outputs, making it ideal for various configurations within an AV system. The HSA 200SE incorporates advanced heat management technologies, allowing for extended usage without overheating. This model also includes RS-232 control for integration into larger control systems, offering remote management for convenient audio regulation.

All three models reflect Extron's commitment to quality and user-friendly design. They come equipped with features that ensure reliable performance, such as thermal protection, short circuit protection, and a rugged chassis for increased durability. These amplifiers not only cater to modern audio needs but also align with Extron's overarching philosophy of providing the most efficient, high-performance solutions for audio visual applications. Whether for a large auditorium or a small meeting room, the HSA series delivers exceptional sound clarity and adaptability, making them a go-to choice for AV professionals.
Top Page Image Contents