Cables to Go TE100-S55 manual System Status LEDs

Page 42

System Status LEDs

TE100-S55 is equipped with eight Status LEDs which reflect the Power-On Self Test results. If there is a system error, the Status LED light will be ON and the LEDs - will display the error code.

Although some errors may be resolved easily, some errors may require that the unit be returned to TRENDware reseller for repair.

System error LED

Error

 

Action

Off -

 

 

On -

 

Status

 

 

 

 

 

 

 

 

 

 

 

No error

 

Normal

 

 

 

 

 

 

 

 

Boot

 

Record LED error code and

 

 

 

 

contact technical support

 

 

 

 

 

 

 

 

RAM

 

Record LED error code and

 

 

 

return the unit.

 

 

 

 

 

 

Interrupt

 

Record LED error code and

 

 

controller

 

return the unit.

 

 

Timer

 

Record LED error code and

 

 

controller

 

return the unit.

 

 

Cache

 

Record LED error code and

 

 

controller

 

return the unit.

 

 

RS-232 port

 

Record LED error code and

 

 

 

return the unit.

 

 

 

 

 

 

BIOS

 

Record LED error code and

 

 

 

 

contact technical support

 

 

 

 

 

 

 

 

EEPROM

 

Record LED error code and

 

 

 

 

contact technical support

 

 

 

 

 

 

 

 

Program

 

Record LED error code and

 

 

 

 

contact technical support

 

 

 

down-load

 

 

 

 

 

 

 

 

 

 

 

Port error LED

 

 

 

 

 

 

 

 

 

 

 

Port 1 - 5

 

The system board is OK; the

 

LED is

 

error (s)

 

reported port(s) is disabled.

 

1 2 3 4 5

 

 

Record LED status and

 

reserved.

port position

 

 

contact technical support.

 

 

 

 

 

 

 

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents ProXpressTM FCC warning Service and support About this manual Table of Contents Index Introduction Fast Ethernet TechnologySwitching Technology Cable Specification10/100 Switching Technology Benefits of SwitchingIntroducing the TE100-S55 Although two ports are Features of TE100-S55 Getting Started Cabling Rules and Site PreparationFigure -1, Example of TE100-S55 wiring environment Figure -2, 100Base-T cabling rules Unpacking and Setup UnpackingFront Panel Figure -4, Front panel of the TE100-S55Mounting Attaching CablesPower on Adding Optional ModulesSoftware Setup Checking Status LedsConfiguring Switch IntroductionOut-of-Band Management Attaching to the RS-232 PortVT100 Terminal Control Settings System display User selection USER-SELECTIVE Parameters Page Spanning Tree Algorithm Table -3, User-selective STA parameters AT the Bridge Level AT the Port Level Timers Illustration of STA LAN Page Snmp Management What YOU Need Installing XPressViewTo Install Xpressview RAMStarting XPressView Start from ScratchOperating XPressView Open AN Existing EnvironmentSelect a Device VIEW/MODIFY Switch Configuration Modify the Spanning Tree AlgorithmMonitor Network Traffic Diagnostics Power-On Self TestSystem Status LEDs StatusSystem Diagnostic LEDs System Utilization LEDsPort Status LEDs LinkAppendices Appendix B RS-232 Pin Specification Appendix C RJ-45 Pin Specification Standard Category 3 cable, RJ-45 pin assignment Appendix D 10Base-T Module Appendix E 100Base-FX/TX Module Page Appendix F Isdn Module Page Switch Specification Port Specification10/100Mbps LAN ports fixed Index See Post

TE100-S55 specifications

The Cables to Go TE100-S55 is a reliable and efficient Ethernet switch that caters to both small office and home office environments. Designed for seamless integration into various networking applications, this compact switch offers a plethora of features and technologies that enhance performance and connectivity.

One of the main characteristics of the TE100-S55 is its five-port design, which includes five 10/100 Mbps Ethernet ports. This configuration is particularly advantageous for users looking to expand their network without the need for extensive cabling or complicated setups. Each port is auto-sensing, allowing for automatic negotiation of speed and duplex, ensuring optimal performance across connected devices.

The TE100-S55 supports a low-latency, plug-and-play setup, making it user-friendly and compatible with a wide range of operating systems and platforms. There is no need for complicated installation processes or software drivers; users can simply connect their devices, and the switch is ready to go. This feature significantly reduces downtime and improves productivity in environments where seamless connectivity is crucial.

Another notable feature of the TE100-S55 is its support for both Ethernet and Fast Ethernet connections, allowing it to adapt to various networking scenarios. It supports a data throughput of up to 200 Mbps in full-duplex mode, which is essential for bandwidth-intensive applications such as video streaming, online gaming, and large file transfers.

The switch also includes a range of technologies to enhance network performance and reliability. Features such as store-and-forward switching help to minimize packet collisions, while a built-in LED indicator provides real-time status updates on device connectivity and network activity. This awareness allows users to troubleshoot connectivity issues effectively.

In terms of energy efficiency, the TE100-S55 using a fanless design ensures quiet operation while minimizing power consumption. Its compact form factor makes it easy to place in any setting without taking up too much space.

Overall, the Cables to Go TE100-S55 Ethernet switch stands out for its combination of user-friendly features, efficient performance, and reliable connectivity. It is an ideal solution for users looking to optimize their networking experience with minimal hassle, making it a valuable addition to any small or home office environment.
Top Page Image Contents