Cables to Go TE100-S55 manual 10/100Mbps LAN ports fixed

Page 55

5 x 10/100Mbps LAN ports (fixed)

•Five RJ-45 ports for Cat 3, 4 or 5 UTP cable

•10 or 100Mbps data transfer rate

•Full or half duplexing

•NWAY Auto-negotiation

8 x 10Mbps LAN ports (optional module)

•Eight RJ-45 ports for Cat 3, 4 or 5 UTP cable

•10Mbps data transfer rate

•Full or half duplexing

•NWAY Auto-negotiation

1 x 100Base-FX/TX LAN port (optional module)

•One MIC port for 62.5/125 microns multimode fiber optic

•One RJ-45 ports for Cat 5 UTP or STP cable

•100Mbps data transfer rate

•Full or half duplexing

•NWAY Auto-negotiation

1 x ISDN WAN port (optional module)

•One RJ-11 port for ISDN phone line

•Up to 128K baud rate (two 64Kbps channels)

PHYSICAL CHARACTERISTICS

Operating temperature:

0 - 50 degrees Celsius

Humidity:

5% - 95% non-condensing

Input power:

90 - 250 VAC, 50 - 60 Hz auto-select

Power consumption:

20 watts maximum

Emission:

FCC Class A, CE mark

Safety:

UL, CSA

Ventilation:

2 built-in DC fans

Dimension:

17.36 in (w), 2.85 in (h), 9.37 in (d)

Weight:

8 lb.

Warranty:

One year parts and labor

55

Page 54 Page 56
Image 55
Page 54 Page 56
Contents ProXpressTM FCC warning Service and support About this manual Table of Contents Index Fast Ethernet Technology IntroductionCable Specification Switching TechnologyBenefits of Switching 10/100 Switching TechnologyIntroducing the TE100-S55 Although two ports are Features of TE100-S55 Cabling Rules and Site Preparation Getting StartedFigure -1, Example of TE100-S55 wiring environment Figure -2, 100Base-T cabling rules Unpacking Unpacking and SetupFigure -4, Front panel of the TE100-S55 Front PanelAttaching Cables MountingAdding Optional Modules Power onChecking Status Leds Software SetupIntroduction Configuring SwitchAttaching to the RS-232 Port Out-of-Band ManagementVT100 Terminal Control Settings System display User selection USER-SELECTIVE Parameters Page Spanning Tree Algorithm Table -3, User-selective STA parameters AT the Bridge Level AT the Port Level Timers Illustration of STA LAN Page Snmp Management RAM Installing XPressViewTo Install Xpressview What YOU NeedStart from Scratch Starting XPressViewOpen AN Existing Environment Operating XPressViewSelect a Device Modify the Spanning Tree Algorithm VIEW/MODIFY Switch ConfigurationMonitor Network Traffic Power-On Self Test DiagnosticsStatus System Status LEDsSystem Utilization LEDs System Diagnostic LEDsLink Port Status LEDsAppendices Appendix B RS-232 Pin Specification Appendix C RJ-45 Pin Specification Standard Category 3 cable, RJ-45 pin assignment Appendix D 10Base-T Module Appendix E 100Base-FX/TX Module Page Appendix F Isdn Module Page Port Specification Switch Specification10/100Mbps LAN ports fixed Index See Post

TE100-S55 specifications

The Cables to Go TE100-S55 is a reliable and efficient Ethernet switch that caters to both small office and home office environments. Designed for seamless integration into various networking applications, this compact switch offers a plethora of features and technologies that enhance performance and connectivity.

One of the main characteristics of the TE100-S55 is its five-port design, which includes five 10/100 Mbps Ethernet ports. This configuration is particularly advantageous for users looking to expand their network without the need for extensive cabling or complicated setups. Each port is auto-sensing, allowing for automatic negotiation of speed and duplex, ensuring optimal performance across connected devices.

The TE100-S55 supports a low-latency, plug-and-play setup, making it user-friendly and compatible with a wide range of operating systems and platforms. There is no need for complicated installation processes or software drivers; users can simply connect their devices, and the switch is ready to go. This feature significantly reduces downtime and improves productivity in environments where seamless connectivity is crucial.

Another notable feature of the TE100-S55 is its support for both Ethernet and Fast Ethernet connections, allowing it to adapt to various networking scenarios. It supports a data throughput of up to 200 Mbps in full-duplex mode, which is essential for bandwidth-intensive applications such as video streaming, online gaming, and large file transfers.

The switch also includes a range of technologies to enhance network performance and reliability. Features such as store-and-forward switching help to minimize packet collisions, while a built-in LED indicator provides real-time status updates on device connectivity and network activity. This awareness allows users to troubleshoot connectivity issues effectively.

In terms of energy efficiency, the TE100-S55 using a fanless design ensures quiet operation while minimizing power consumption. Its compact form factor makes it easy to place in any setting without taking up too much space.

Overall, the Cables to Go TE100-S55 Ethernet switch stands out for its combination of user-friendly features, efficient performance, and reliable connectivity. It is an ideal solution for users looking to optimize their networking experience with minimal hassle, making it a valuable addition to any small or home office environment.
Top Page Image Contents