Cables to Go TE100-S55 manual Appendix F Isdn Module

Page 52

Appendix F ISDN Module

An Integrated Services Digital Network (ISDN) is one of the most rapidly expanding technologies for transmitting data and voice over wide area networks (WANs). The popularity of ISDN is due to its high-speed WAN connections at low cost, enabling greater productivity not only for home office workers or internet users, but also for corporate branch offices and remote sites.

In comparison, ISDN can transfer data more than four times as fast as a cutting-edge 28.8 Kbps modem. In its simplest form, ISDN offers the Basic Rate Interface (BRI), which has two 64Kbps B channels and a single 16Kbps D channel. The B channels can be combined, making the maximum transmission rate of 128Kbps. Furthermore, data compression enables an ISDN link to achieve up to 512Kbps transmission speeds.

ISDN provides high-speed remote access that is ideal for applications where analog connections are too slow and T1 connections are too expensive.

The ISDN Router module for the TE100-S55 is an excellent solution for connecting individuals or offices to headquarters or to the internet/intranet. It offers the equivalent bandwidth and reliability of leased lines at a significantly lower cost.

The ISDN Router module uses a single ISDN BRI capable of sending data over one B channel for data rates of 64Kbps or use both B channels for data rates of up to 128Kbps. Optional data compression can boost throughput up to 4-to-1 (512Kbps), depending on the data being transferred.

How to Install the ISDN module

52

Page 51 Page 53
Image 52
Page 51 Page 53
Contents ProXpressTM FCC warning Service and support About this manual Table of Contents Index Introduction Fast Ethernet TechnologySwitching Technology Cable Specification10/100 Switching Technology Benefits of SwitchingIntroducing the TE100-S55 Although two ports are Features of TE100-S55 Getting Started Cabling Rules and Site PreparationFigure -1, Example of TE100-S55 wiring environment Figure -2, 100Base-T cabling rules Unpacking and Setup UnpackingFront Panel Figure -4, Front panel of the TE100-S55Mounting Attaching CablesPower on Adding Optional ModulesSoftware Setup Checking Status LedsConfiguring Switch IntroductionOut-of-Band Management Attaching to the RS-232 PortVT100 Terminal Control Settings System display User selection USER-SELECTIVE Parameters Page Spanning Tree Algorithm Table -3, User-selective STA parameters AT the Bridge Level AT the Port Level Timers Illustration of STA LAN Page Snmp Management Installing XPressView To Install XpressviewWhat YOU Need RAMStarting XPressView Start from ScratchOpen AN Existing Environment Operating XPressViewSelect a Device VIEW/MODIFY Switch Configuration Modify the Spanning Tree AlgorithmMonitor Network Traffic Diagnostics Power-On Self TestSystem Status LEDs StatusSystem Diagnostic LEDs System Utilization LEDsPort Status LEDs LinkAppendices Appendix B RS-232 Pin Specification Appendix C RJ-45 Pin Specification Standard Category 3 cable, RJ-45 pin assignment Appendix D 10Base-T Module Appendix E 100Base-FX/TX Module Page Appendix F Isdn Module Page Switch Specification Port Specification10/100Mbps LAN ports fixed Index See Post

TE100-S55 specifications

The Cables to Go TE100-S55 is a reliable and efficient Ethernet switch that caters to both small office and home office environments. Designed for seamless integration into various networking applications, this compact switch offers a plethora of features and technologies that enhance performance and connectivity.

One of the main characteristics of the TE100-S55 is its five-port design, which includes five 10/100 Mbps Ethernet ports. This configuration is particularly advantageous for users looking to expand their network without the need for extensive cabling or complicated setups. Each port is auto-sensing, allowing for automatic negotiation of speed and duplex, ensuring optimal performance across connected devices.

The TE100-S55 supports a low-latency, plug-and-play setup, making it user-friendly and compatible with a wide range of operating systems and platforms. There is no need for complicated installation processes or software drivers; users can simply connect their devices, and the switch is ready to go. This feature significantly reduces downtime and improves productivity in environments where seamless connectivity is crucial.

Another notable feature of the TE100-S55 is its support for both Ethernet and Fast Ethernet connections, allowing it to adapt to various networking scenarios. It supports a data throughput of up to 200 Mbps in full-duplex mode, which is essential for bandwidth-intensive applications such as video streaming, online gaming, and large file transfers.

The switch also includes a range of technologies to enhance network performance and reliability. Features such as store-and-forward switching help to minimize packet collisions, while a built-in LED indicator provides real-time status updates on device connectivity and network activity. This awareness allows users to troubleshoot connectivity issues effectively.

In terms of energy efficiency, the TE100-S55 using a fanless design ensures quiet operation while minimizing power consumption. Its compact form factor makes it easy to place in any setting without taking up too much space.

Overall, the Cables to Go TE100-S55 Ethernet switch stands out for its combination of user-friendly features, efficient performance, and reliable connectivity. It is an ideal solution for users looking to optimize their networking experience with minimal hassle, making it a valuable addition to any small or home office environment.
Top Page Image Contents