Cables to Go TE100-S55 manual 10/100 Switching Technology, Benefits of Switching

Page 9

performance or “wire-speed.” Therefore, a switch effectively splits a physical shared-access LAN into bridged multiple LAN segments. Each segment supports a workgroup and even provides a dedicated connection to a desktop server. The outcome is a multiplication of the overall available bandwidth and a more predictable performance under heavy network loads.

10/100 Switching Technology

Just as 100Base-T is an extension of the existing 10Base-T technology, 10/100 Switching is merely an extension of 10Base-T Switching. The 10/100 Switch provides not only the 10/100Mbps high-speed transmission rate per segment, but it also bridges 10Base-T and 100Base-T into a harmonious network.

Combining Fast Ethernet and Switching technologies, the 10/100 Switch provides enough bandwidth to satisfy the most demanding workgroups, as well as a high-speed backbone link.

Benefits of Switching

From the technical point of view, Ethernet switching technology dramatically boosts the total bandwidth of a network. It also puts configuration flexibility and bandwidth adaptability into the local workgroups where the majority of work is generated from a business operation. Switching further eliminates the congestion problem inherent to the contention oriented Ethernet CSMA/CD protocol, thereby improving predictable response times under heavy network loads. In the past, this congestion under heavy loads was alleviated using an expensive routing technology.

From the applications point of view, the new wave of object oriented distributed Client/Server applications demands higher bandwidth and tighter integration of client workstations with servers. The legacy shared-access 10Mbps Ethernet technology

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents ProXpressTM FCC warning Service and support About this manual Table of Contents Index Fast Ethernet Technology IntroductionCable Specification Switching TechnologyBenefits of Switching 10/100 Switching TechnologyIntroducing the TE100-S55 Although two ports are Features of TE100-S55 Cabling Rules and Site Preparation Getting StartedFigure -1, Example of TE100-S55 wiring environment Figure -2, 100Base-T cabling rules Unpacking Unpacking and SetupFigure -4, Front panel of the TE100-S55 Front PanelAttaching Cables MountingAdding Optional Modules Power onChecking Status Leds Software SetupIntroduction Configuring SwitchAttaching to the RS-232 Port Out-of-Band ManagementVT100 Terminal Control Settings System display User selection USER-SELECTIVE Parameters Page Spanning Tree Algorithm Table -3, User-selective STA parameters AT the Bridge Level AT the Port Level Timers Illustration of STA LAN Page Snmp Management To Install Xpressview Installing XPressViewWhat YOU Need RAMStart from Scratch Starting XPressViewOperating XPressView Open AN Existing EnvironmentSelect a Device Modify the Spanning Tree Algorithm VIEW/MODIFY Switch ConfigurationMonitor Network Traffic Power-On Self Test DiagnosticsStatus System Status LEDsSystem Utilization LEDs System Diagnostic LEDsLink Port Status LEDsAppendices Appendix B RS-232 Pin Specification Appendix C RJ-45 Pin Specification Standard Category 3 cable, RJ-45 pin assignment Appendix D 10Base-T Module Appendix E 100Base-FX/TX Module Page Appendix F Isdn Module Page Port Specification Switch Specification10/100Mbps LAN ports fixed Index See Post

TE100-S55 specifications

The Cables to Go TE100-S55 is a reliable and efficient Ethernet switch that caters to both small office and home office environments. Designed for seamless integration into various networking applications, this compact switch offers a plethora of features and technologies that enhance performance and connectivity.

One of the main characteristics of the TE100-S55 is its five-port design, which includes five 10/100 Mbps Ethernet ports. This configuration is particularly advantageous for users looking to expand their network without the need for extensive cabling or complicated setups. Each port is auto-sensing, allowing for automatic negotiation of speed and duplex, ensuring optimal performance across connected devices.

The TE100-S55 supports a low-latency, plug-and-play setup, making it user-friendly and compatible with a wide range of operating systems and platforms. There is no need for complicated installation processes or software drivers; users can simply connect their devices, and the switch is ready to go. This feature significantly reduces downtime and improves productivity in environments where seamless connectivity is crucial.

Another notable feature of the TE100-S55 is its support for both Ethernet and Fast Ethernet connections, allowing it to adapt to various networking scenarios. It supports a data throughput of up to 200 Mbps in full-duplex mode, which is essential for bandwidth-intensive applications such as video streaming, online gaming, and large file transfers.

The switch also includes a range of technologies to enhance network performance and reliability. Features such as store-and-forward switching help to minimize packet collisions, while a built-in LED indicator provides real-time status updates on device connectivity and network activity. This awareness allows users to troubleshoot connectivity issues effectively.

In terms of energy efficiency, the TE100-S55 using a fanless design ensures quiet operation while minimizing power consumption. Its compact form factor makes it easy to place in any setting without taking up too much space.

Overall, the Cables to Go TE100-S55 Ethernet switch stands out for its combination of user-friendly features, efficient performance, and reliable connectivity. It is an ideal solution for users looking to optimize their networking experience with minimal hassle, making it a valuable addition to any small or home office environment.
Top Page Image Contents