Please follow the steps below to construct a complete RAID array:
1)Have ready your hard drives for RAID construction.
Note: To achieve best performance, it is recommended that the hard drives used are of similar make and storage capacity.
2)Please attach the hard drive connectors to their appropriate location on the motherboard ie. IDE, SCSI, or SATA.
3)Enter the motherboard BIOS and locate RAID setup (Please refer to the section on Integrated Peripherals).
4)Enter RAID setup in the BIOS and select the RAID type (For instance, enter Ctrl + A to select ALi RAID; Ctrl + S to select Silicon Image).
5)Complete driver installation.
6)Complete RAID utility installation.
More information on steps 4 and 5 is provided. (For more detailed setup information, please visit "Support\ Motherboard\ Technology Guide section" on our website at http:\\www.gigabyte.com.tw to read or download the information you need.)
Configuring the ALi RAID BIOS
The ALi RAID BIOS setup utility lets you choose the RAID array type and which hard drives you want to make part of the array.
Entering the RAID BIOS Setup
1.After rebooting your computer, wait until you see the RAID software prompting you to press Ctrl + A. The RAID prompt appears as part of the system POST and boot process prior to loading the OS. You have a few seconds to press Ctrl + A before the window disappears.
ALi RAID BIOS V1.04 (M5289)
(c)ALi Corporation 2004, All Rights Reserved. Indentifying IDE drives .o.o.
Channel 1 Master : ST3120026AS | SATA 1 | 120034 MB |
Channel 2 Master : ST3120026AS | SATA 1 | 120034 MB |
Press
Press Ctrl + A.
The ULi RAID BIOS Setup Utility window appears (as Figure below).
|
| RAID BIOS Setup Utility (c) 2004 ALi Corporation | www.ali.com.tw | ||||||||
| Create RAID 0 Striping | for Performance |
|
|
|
|
|
|
| ||
| Create RAID 1 Mirroring for Reliability |
|
|
|
|
|
|
| |||
| Create JBOD for integrated Capacity |
|
|
| SPACE : | Select |
| ||||
| Stripe Size |
|
|
| 64K |
|
|
| |||
| Delete RAID Settings & Partition |
|
| , | : | Moving Cursor | |||||
| Delete All RAID Settings & Partition |
|
|
| Enter | : | Select & Finish | ||||
| Rebuild RAIDArray |
|
|
| ESC | : | Exit |
| |||
|
|
|
| Drive Model |
| Mode |
| Capacity | RAIDArray/Type | ||
| Channel 1 Master : | ST3120026AS |
| SATA | 1 | 120034 MB |
| ||||
| Channel 2 Master : ST3120026AS |
| SATA 1 | 120034 MB |
| ||||||
| RAID Array A | : |
| Capacity |
| RAID Type | Stripe Size | RAID Name | |||
|
|
|
|
|
|
|
|
|
| ||
| RAID Array B | : |
|
|
|
|
|
|
|
|
|
| RAID Array C | : |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
English
- 65 - | Appendix |