Gigabyte GZ-FSCA1-AN, GZ-FSCA1-SN user manual 5Casing’s Internal Structure

Page 12

English

4-4-3 Insert the Audio connector into the corresponding socket on the motherboard.

Pin

Definition

Pin

Definition

1

MIC

6

Rear Audio (R)

2

GND

7

Reserved

3

REF

8

 

4

POWER

9

Front Audio (L)

5

Front Audio (R)

10

Rear Audio (L)

(2) Basic casing power switch control cable kit.

Follow the connectors listed below for installation (see the figure below).

Connector

Color

Speaker

Red(+) / Black(-)

Reset SW

Green(+) / White(-)

Power SW

Red(+) / White(-)

POW LED+

Black

POW LED-

White

H.D.D. LED

Brown(+) / White(-)

Be sure to remember that different motherboards may have different installation positions. For detailed instructions, please refer to the instructions supplied by the motherboard manufacturer.

4-5Casing’s Internal Structure

The 3D AURORA is equipped with one 12cm silent LED cooling fan at front / two at rear. Required tool: None

4-5-1 Plug the front fan 4-pin power cable into the 4-pin connector on the motherboard.

4-5-2 Plug the rear fan 3-pin power connector into the fan power connector of the motherboard system.

12

Image 12
Contents 3D Aurora 3D Aurora Introduction Content Components Introduction 1Casing’s Internal StructureFloppy Built-in hard disk 2Front, Rear, and Left Side Panel Structure Features High quality designSpecification Features GZ-FSCA1-AN / GZ-FSCA1-SNInstallation Instruction 1Installation of Power Supply2Installation of Motherboard 3Installation of Interface Card 4Installation of Front I/O Panel 5Casing’s Internal Structure 6Installation of 5.25 Front Device Bay 7Installation of 3.5 Front Device Bay8Installation of Built-in HDD Hard Disc Drive 9DIY Front Bracket of Projector Light 10Application of Security Lock 11Application of Foot Supports12Liquid cooling System Support 13Recommended Air Cooling/ Liquid CoolingEnglish