Gigabyte GZ-FSCA1-AN, GZ-FSCA1-SN user manual 3D Aurora Introduction

Page 2

3D AURORA Introduction

Gigabyte Technology has been dedicated to the integration of casing and water/air cooling technology to provide users with the most optimal solution for thermal dissipation. The five features of the 3D AURORA series casing include state-of-art design, cooling technology, liquid cooling support, system security, and easy installation etc. For further information and specifications of the 3D AURORA series, please download them from Gigabyte’s website.

The following are not covered by the warranty:

1.Use the product incorrectly or in a manner other than the designed purpose.

2.Nonobservance of the proper operation provided. (e.g. over-clocking)

3.Malfunction due to interference from other devices.

4.Unapproved modification of the product.

5.Consequential damage to other objects due to the product’s fault.

6.Malfunction arising from casualties (earthquake, thunder, fire, and flood).

7.The product’s warranty label has been removed or damaged.

8.The devices inside, including power supply, hard disk, CD-ROM drive, motherboard, ventilator, etc, are not detached from the casing prior to the transportation of the computer product, resulting in damage to the casing or computer-related devices.

9.Any lose due caused by failure to follow the installation process contained in the user.

Caution

Failure to wear gloves during installation of computer products may cause damage to personnel and devices. Incorrect connector installation may possibly burn out the motherboard and other components. Be sure to observe the instructions on installation in the manual.

Please refer to the English version for all pictures.

Image 2
Contents 3D Aurora 3D Aurora Introduction Content Components Introduction 1Casing’s Internal StructureFloppy Built-in hard disk 2Front, Rear, and Left Side Panel Structure Features High quality designSpecification Features GZ-FSCA1-AN / GZ-FSCA1-SN2Installation of Motherboard Installation Instruction1Installation of Power Supply 3Installation of Interface Card 4Installation of Front I/O Panel 5Casing’s Internal Structure 6Installation of 5.25 Front Device Bay 7Installation of 3.5 Front Device Bay8Installation of Built-in HDD Hard Disc Drive 9DIY Front Bracket of Projector Light 10Application of Security Lock 11Application of Foot Supports12Liquid cooling System Support 13Recommended Air Cooling/ Liquid CoolingEnglish