Gigabyte GZ-FSCA1-SN, GZ-FSCA1-AN user manual Floppy Built-in hard disk

Page 5

3.5” Floppy	Built-in hard disk

English

Foot support

Tool enclosure

(Refer to the right figures for the attachments in the tool enclosure)

Front cable kit

a. Standoff x 9	b. Power extension	c. Securing runner x 10
	cable x 2
d. Key x 2	e. Wire clamp x 2	f. Motherboard
		securing screw x 9
g. Power supply	h. DIY transparent projector panel x 1
securing screw x 4	(Equipped with 3D AURORA at
	shipment)

a. USB 2.0

b. AUDIO

c. IEEE 1394

(Refer to the right figures for the cable connectors)

	d. Front fan power	e. Rear fan power	f. Basic casing
			power switch
	supply	supply
			control cable kit

5

Image 5

Contents 3D Aurora 3D Aurora Introduction Content 1Casing’s Internal Structure Components IntroductionFloppy Built-in hard disk 2Front, Rear, and Left Side Panel Structure High quality design FeaturesGZ-FSCA1-AN / GZ-FSCA1-SN Specification Features2Installation of Motherboard Installation Instruction1Installation of Power Supply 3Installation of Interface Card 4Installation of Front I/O Panel 5Casing’s Internal Structure 7Installation of 3.5 Front Device Bay 6Installation of 5.25 Front Device Bay8Installation of Built-in HDD Hard Disc Drive 9DIY Front Bracket of Projector Light 11Application of Foot Supports 10Application of Security Lock13Recommended Air Cooling/ Liquid Cooling 12Liquid cooling System SupportEnglish