Gigabyte 8S648FX-RZ user manual Top Performance, AGP Clock MHz, PCI Clock MHz, AGP Voltage Control

AGP Clock (MHz)

Please set AGP Clock according to your requirement.

Incorrect using it may cause your system broken. For power End-User use only!

PCI Clock (MHz)

Please set PCI Clock according to your requirement.

Incorrect using it may cause your system broken. For power End-User use only!

AGP Voltage Control

Normal	Set AGP Voltage Control to Normal. (Default value)
+0.1V	Set AGP Voltage Control to +0.1V.

DRAM Voltage Control

Normal	Set DRAM Voltage Control to Normal. (Default value)
+0.1V	Set DRAM Voltage Control to +0.1V.

Top Performance

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

`
	Standard CMOS Features				Top Performance
`	Advanced BIOS	Features			Load Fail-Safe	Defaults
`	Integrated Peripherals				Load Optimized	Defaults
`			Top Performance
	Power Management Setup				Set Supervisor	Password
`			Disabled.........................[„]
	PnP/PCI Configurations				Set User Password
`			Enabled..........................[ ]
	PC Health Status				Save & Exit Setup
`	Frequency/Voltage Control				Exit Without Saving
ESC: Quit			KL: Move		KLJI: Select Item
F8: Q-Flash				ENTER: Accept
			ESC: Abort		F10: Save & Exit Setup

If you wish to maximize the performance of your system, set "Top Performance" as "Enabled".

Disabled	Disable this function. (Default Value)
Enabled	Enable Top Performance function.

"Top Performance" will increase H/W working speed. Different system configuration (both H/W component and OS) will effect the result. For example, the same H/W configuration might not run properly with Windows XP, but works smoothly with Windows NT. Therefore, if your system is not perform enough, the reliability or stability problem will appear sometimes, and we will recommend you disabling the option to avoid the problem as mentioned above.

English

- 31 - BIOS Setup