Gigabyte GA-K8VT800-RH Top Performance, Load Fail-Safe Defaults, Dimm OverVoltage control

DIMM OverVoltage control

Auto	Supply DIMM voltage as DIMM required. (Default value)
+0.1V	Increase DIMM voltage +0.1V.
+0.2V	Increase DIMM voltage +0.2V.

Please note that by overclocking your system through the increase of the DDR voltage, damage to the memory may occur.

2-8	Top Performance
	CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
`	Standard CMOS Features			Top Performance
`	Advanced BIOS Features			Load Fail-Safe Defaults
`	Integrated Peripherals	Top Performance		Load Optimized Defaults
`	Power Management Setup			Set Supervisor Password
`	PnP/PCI Configurations Disabled.........................[„]			Set User Password
`	PC Health Status	Enabled..........................[ ]		Save & Exit Setup
`	Frequency/Voltage Control			Exit Without Saving
Esc: Quit		KL: Move		KLJI: Select Item
F8: Q-Flash			ENTER: Accept
		ESC: Abort		F10: Save & Exit Setup
			Load Fail-Safe Defaults

If you wish to maximize the performance of your system, set "Top Performance" as "Enabled".

Disabled	Disable this function. (Default Value)
Enabled	Enable Top Performance function.

"Top Performance" will increase hardware working speed. Different system configuration (both hard- ware component and OS) will effect the result. For example, the same hardware configuration might not run properly with Windows XP, but works smoothly with Windows NT. Therefore, if your system is not perform enough, the reliability or stability problem will appear sometimes, and we will recommend you disabling the option to avoid the problem as mentioned above.

2-9	Load Fail-Safe Defaults
	CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
`	Standard CMOS Features	Top Performance
`	Advanced BIOS Features	Load Fail-Safe Defaults
`	Integrated Peripherals	Load Optimized Defaults
`	Power Management Setup	Set Supervisor Password
`	PnP/PCI Configurations	Load Fail-Safe DefaultsSet(Y/N)?User NPassword
`	PC Health Status	Save & Exit Setup
`	Frequency/Voltage Control	Exit Without Saving
Esc: Quit		KLJI: Select Item
F8: Q-Flash		F10: Save & Exit Setup
		Load Fail-Safe Defaults

Fail-Safe defaults contain the most appropriate values of the system parameters that allow minimum system performance.

English

- 43 - BIOS Setup