Gigabyte GA-7N400S-L user manual Standard Cmos Features, Time

English

2-1	Standard CMOS Features
		CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
			Standard CMOS Features
	Date (mm:dd:yy)		Tue, Sep 21 2004		Item Help
	Time (hh:mm:ss)		22:31:24		Menu Level`
` IDE Channel 0 Master			[None]		Change the day, month,
` IDE Channel 0 Slave			[None]		year
` IDE Channel 1 Master			[None]
` IDE Channel 1 Slave			[None]		<Week>
` IDE Channel 2 Master			[None]		Sun. to Sat.
` IDE Channel 3 Master			[None]		<Month>
	Drive A		[1.44M, 3.5"]		Jan. to Dec.
	Drive B		[None]
	Floppy 3 Mode Suport		[Disabled]		<Day>
					1 to 31 (or maximum
	Halt On		[All, But Keyboard]		allowed in the month)
	Base Memory		640K		<Year>
	Extended Memory		239M		1999 to 2098
	Total Memory		240M
KLJI: Move		Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
	F5: Previous Values		F6: Fail-Save Defaults		F7: Optimized Defaults
	Date
	The date format is <week>, <month>, <day>, <year>.
	Week	The week, from Sun to Sat, determined by the BIOS and is display only
	Month	The month, Jan. Through Dec.
	Day	The day, from 1 to 31 (or the maximum allowed in the month)
	Year	The year, from 1999 through 2098

Time

The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military- time clock. For example, 1 p.m. is 13:00:00.

IDE Channel 0 Master/Slave; IDE Channel 1 Master/Slave; IDE Channel 2/3 Master

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.

IDE Channel 0 Master/Slave; IDE Channel 1 Master/Slave; IDE Channel 2/3 Master IDE and SATA devices setup. You can use one of three methods:

Auto	Allows BIOS to automatically detect IDE devices during POST. (Default value)
None	Select this if no IDE devices are used and the system will skip the automatic
	detection step and allow for faster system start up.
Manual	User can manually input the correct settings.
Access Mode	Use this to set the access mode for the hard drive. The four options are:
	CHS/LBA/Large/Auto(default:Auto)

Hard drive information should be labeled on the outside drive casing. Enter the appropriate option based on this information.

Cylinder	Number of cylinders
Head	Number of heads
Precomp	Write precomp
Landing Zone	Landing zone
Sector	Number of sectors
If a hard disk has not been installed, select NONE and press <Enter>.
GA-7N400S(-L) Motherboard		- 30 -