ATTO Technology 2400C/R/D Atto FibreBridge 2400R/D, Input voltage 100-240 VAC 1.7-.7A 50- 60Hz

Page 14

1.4 ATTO FibreBridge 2400R/D

The ATTO FibreBridge 2400R/D is a high performance bridge adding 4-Gigabit Fibre Channel connectivity to legacy SCSI storage devices.

The FibreBridge 2400R/D is available in an industry- standard 1U form factor for easy integration into racks.

Default values are appropriate for most applications. Refer to Configuring the FibreBridge on page 15 for more information.

WARNING

Risk of explosion if the battery is removed and/or replaced by an incorrect type. Dispose of used batteries in accordance with your local environmental regulations.

Dimensions

Width: 17 inches

Length: 11 inches

Height: 1.7 inches (1U)

Weight: approximately 10 pounds

Cooling and airflow

Operating temperature: 0-40 °C external

Humidity: 10-90% non-condensing

Air enters from the front and is exhausted out the connector side. Ambient air near the inlets should not exceed 40°C. The unit automatically stops operation if the temperature goes beyond this threshold.

CAUTION

Do not block the enclosure’s vents. The FibreBridge does not allow data transfer if overheating occurs.

Power

The power supply circuit is permanently mounted within the enclosure and is not hot swappable. It has one standard IEC320 power receptacle and switch.

The universal power supply provides power for the bridge board and cooling fan.

The power requirements of the ATTO FibreBridge 2400R plus the power draw of the other equipment in the rack must not overload the supply circuit and/or wiring of the rack.

Input voltage: 100-240 VAC; 1.7-.7A; 50- 60Hz.

Battery-backed event log SRAM & Real-Time- Clock: A rechargeable Lithium ion battery cell holds the memory in a 512KB SRAM for up to 30 days.

Explosionsgefahr, wenn die Batterie falsch entfernt und/oder ersetzt wird. Entsorgen Sie benutzte Batterien in Übereinstimmung mit Ihren lokalen Umweltschutzbestimmungen.

If the FibreBridge becomes disconnected from power, recharging begins automatically when power is restored to the system. The battery is fully charged after 24 hours of continuous power application.

Fibre Channel port

The dual independent 4-Gigabit Fibre Channel ports can connect the FibreBridge to either a Fabric or Arbitrated Loop using a Small Formfactor Pluggable (SFP) interface. The FibreBridge 2400R/D auto negotiates with 1-Gb, 2-Gb and 4-Gb/sec. devices

SCSI ports

The two SCSI ports connect storage devices into the Fibre Channel Storage Area Network (SAN). Each port is totally independent from the other.

The ports are Ultra320 SCSI busses with VHDCI connector, downward compatible with all forms of single-ended SCSI and all previous SCSI protocols.

Management ports

The 10/100 Base T Ethernet port is accessible from the RJ45 connector to support local and remote diagnostics, monitoring and management.

The RS-232 serial port provides

 

 

support for remote monitoring

 

 

and management using a DB9

1

6

connector. The baud rate is

RX 2

7

programmable and preset at the

TX 3

8

4

9

factory to 115200 bps.

GND 5

 

9

ATTO Technology Inc. FibreBridge Installation and Operation Manual

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Atto FibreBridge Atto Technology, Inc Contents Map devices Installing the FibreBridgeConfiguring the FibreBridge Remote monitoring, managementAppendix D Warranty information Xix Atto FibreBridge 2370E features, benefits Atto FibreBridge provides storage optionsAtto FibreBridge 2390C/R/D features, benefits Atto FibreBridge 2400C/R/D features, benefitsAtto FibreBridge 2370E LED Header P5 Pins LED Header P6 PinsAtto FibreBridge 2390R/D DimensionsOperating temperature 0-40 C external Fibre Channel interfaceManual reset switch LEDs on the front panel areHeight of tallest component .545 inches Input voltage Power draw 30 WattsAtto FibreBridge 2390C Page Atto FibreBridge 2400R/D Input voltage 100-240 VAC 1.7-.7A 50- 60HzLEDs on the faceplate are Power Atto FibreBridge 2400CInches Install the FibreBridge Install the FibreBridgeUnpack the packing box verify contents Discover the IP addressClick on Launch Browser Internet Explorer setupBegin initial configuration Select Internet OptionsModify passwords Configure the FibreBridgePort configurations Preliminary stepsEnhance performance ManagementScsi device mapping Map devicesFibreBridge mapping Mapping devices manually Multiple Node addressing FB2400 onlyMapping devices automatically Remote monitoring, management Remote Management page appears Traps disabledSNMP-based monitoring Event Severity Extended ExplanationEmail messages provide error notification Vdda Vddb Vddc VdddEvent Severity Explanation Using FTP Update firmwareUsing ExpressNAV Using the zModem commandClick Send File Interface options Using ExpressNAVUsing the serial port Opening an ExpressNAV sessionUsing Telnet EnterFibre Channel connections Appendix a CablingScsi port connections Serial port connectionsCommand conventions Symbol Indicates Appendix B CLI provides ASCII-based interfaceCLI summary reference CLI error messagesCommand Default Example Ipdhcp Snmp Command explanations DisplayEventLogFilter DumpConfigurationDisplayEventLog DisplayTraceLogEmailServerAddress EmailPasswordEmailNotifyAddress EmailUsernameFCHardAddress FCPortErrorsFCHard FCMultiNode FB2400 onlyIdentifyBridge FirmwareRestartHelp InfoReset FCPortErrors PasswordReadOnlyPassword RestoreConfigurationSCSIPortResetOnStartup SaveConfigurationSCSIPortReset RouteSCSIPortTermination SerialPortBaudRateSerialPortEcho SCSIPortWideTransferSNMPTraps SpeedWriteDefaultSNMPTrapAddress SNTPServerTraceLogFilter TimeZoneTraceLog UsernameZModem Appendix C Standards and compliances Declaration of ConformityCertification for the FibreBridge 2400 only Appendix D Warranty information

2400C/R/D, 2390C/R/D, 2370E specifications

ATTO Technology is a well-recognized name in the field of high-performance data storage and networking. Among its range of products, the ATTO 2390C/R/D, 2400C/R/D, and 2370E stand out due to their innovative features and advanced technologies tailored for demanding data environments. These devices are specifically designed for applications including digital media, video editing, and data-intensive tasks where speed and reliability are paramount.

The ATTO 2390 Series incorporates advanced features aimed at maximizing performance. One of its key characteristics is the support for multi-channel connectivity, which allows users to connect multiple systems and devices simultaneously. This is particularly beneficial in high-bandwidth applications where multiple data streams are processed simultaneously. In addition, the 2390 models feature a robust cache management system that accelerates data transfer rates, significantly reducing latency and enhancing overall efficiency.

The ATTO 2400 Series further enhances data management capabilities by supporting the latest protocol standards. This ensures compatibility with a wide range of storage systems and infrastructures, providing users with flexibility in their IT setups. Moreover, the 2400 models are optimized for PCIe Gen 4 technology, which delivers impressive throughput rates that cater to the most demanding applications, including 4K and 8K video editing.

The ATTO 2370E takes a slightly different approach, focusing on compatibility and scalability. Designed for high-performance computing environments, it features versatile connection options, including both SAS and SATA interfaces. This not only ensures high data transfer rates but also makes the device adaptable to various storage architectures, whether for entry-level consumers or enterprise solutions.

All three series integrate ATTO's proprietary Advanced Data Streaming (ADS) technology, allowing for smoother workflow by managing data transfers and reducing the bottleneck in high-load scenarios. This capability is essential for content production environments where seamless data handling is crucial.

In conclusion, the ATTO Technology 2390C/R/D, 2400C/R/D, and 2370E are pivotal in enhancing data storage solutions in today's fast-paced digital landscape. Combining high performance, compatibility with modern protocols, and intelligent data management features, these products are designed to meet the needs of professionals in media, entertainment, and enterprise sectors alike. With ATTO's commitment to innovation, users can expect reliable and efficient services that drive their productivity and workflow.
Top Page Image Contents