ATTO Technology 2370E, 2390C/R/D Install the FibreBridge, Unpack the packing box verify contents

Page 18

2.0 Install the FibreBridge

If you have not already completed the instructions on the Quick Start page packed with your FibreBridge, use the following instructions to install the FibreBridge.

Unpack the packing box; verify contents

•The FibreBridge. Note the serial number of your FibreBridge unit: ________________________

•Power cord

•“L” brackets for mounting in a 19” rack

•Ethernet cable

•RS 232 cable

•CD which includes the Firmware, Installation and Operation Manual, QuickNAV™ IP discovery program and system drivers

Install the FibreBridge

1Place the FibreBridge on a stable flat surface, install it into a standard rack or into your device.

If installing the Fibre Bridge 2390R/D or the FibreBridge 2400 R/D into a rack, see Exhibit 2.0-1and follow these instructions:

a.Attach “L” brackets so that the front side with the LEDs face front and the connector side is at the back.

b.Install the FibreBridge horizontally within the rack so it does not reduce the air flow within the rack.

2Connect and power up Fibre Channel devices from your SAN to the FibreBridge using SFPs and multimode fiber optic cables for the Fibre Channel ports. Keep cable lengths as short as possible to ensure the highest signal quality and performance. Refer to Cabling on page i of the Appendix.

3Connect and power up SCSI target devices. Refer to Cabling on page i of the Appendix.

4Connect the Ethernet port to your network.

5Connect power according to the FibreBridge model:

•For the FibreBridge 2370E, FibreBridge 2390C and Fibre Bridge 2400C, connect the power connector to the FibreBridge.

•For the FibreBridge 2390C and FibreBridge 2400C, power is already connected if you have installed the unit using the cPCI connection.

•For the FibreBridge 2390R/D and the FibreBridge 2400R/D, connect the AC power cord from the FibreBridge to the proper AC source outlet and turn on the power using the power switch.

CAUTION

The power source must be connected to a protective earth ground and comply with local electrical codes. Improper grounding may result in an electrical shock or damage to the unit.

If you are using a rack:

a.Properly ground the FibreBridge to the rack equipment. The earth ground connection must be maintained.

b.The power requirements plus the power draw of the other equipment in the rack

must not overload the supply circuit and/or wiring of the rack.

6Wait up to two minutes for the FibreBridge Ready LED to light indicating the FibreBridge has completed its power-on self test sequence.

Discover the IP address

Note

The FibreBridge is initially configured with DHCP enabled. It is best if you have access to a DHCP server.

1Work from the computer attached to the FibreBridge Ethernet port on the same domain. From the CD supplied with your FibreBridge, run the QuickNav Utility QuickNAV- windows.exe for Windows or QuickNAV-Macfor Mac OS X.

2Locate the FibreBridge with the serial number recorded earlier.

3Highlight the serial number.

4Click Next.

If a DHCP server is available on your network, an address is assigned automatically by the server. Note the assigned address:

_____________________________________

13

ATTO Technology Inc. FibreBridge Installation and Operation Manual

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Atto FibreBridge Atto Technology, Inc Contents Map devices Installing the FibreBridgeConfiguring the FibreBridge Remote monitoring, managementAppendix D Warranty information Xix Atto FibreBridge 2370E features, benefits Atto FibreBridge provides storage optionsAtto FibreBridge 2390C/R/D features, benefits Atto FibreBridge 2400C/R/D features, benefitsAtto FibreBridge 2370E LED Header P5 Pins LED Header P6 PinsAtto FibreBridge 2390R/D DimensionsOperating temperature 0-40 C external Fibre Channel interfaceManual reset switch LEDs on the front panel areInput voltage Power draw 30 Watts Atto FibreBridge 2390CHeight of tallest component .545 inches Page Atto FibreBridge 2400R/D Input voltage 100-240 VAC 1.7-.7A 50- 60HzLEDs on the faceplate are Power Atto FibreBridge 2400CInches Install the FibreBridge Install the FibreBridgeUnpack the packing box verify contents Discover the IP addressClick on Launch Browser Internet Explorer setupBegin initial configuration Select Internet OptionsModify passwords Configure the FibreBridgePort configurations Preliminary stepsEnhance performance ManagementMap devices FibreBridge mappingScsi device mapping Multiple Node addressing FB2400 only Mapping devices automaticallyMapping devices manually Remote monitoring, management Remote Management page appears Traps disabledSNMP-based monitoring Event Severity Extended ExplanationEmail messages provide error notification Vdda Vddb Vddc VdddEvent Severity Explanation Using FTP Update firmwareUsing ExpressNAV Using the zModem commandClick Send File Interface options Using ExpressNAVUsing the serial port Opening an ExpressNAV sessionUsing Telnet EnterFibre Channel connections Appendix a CablingScsi port connections Serial port connectionsCommand conventions Symbol Indicates Appendix B CLI provides ASCII-based interfaceCLI error messages Command Default ExampleCLI summary reference Ipdhcp Snmp Command explanations DisplayEventLogFilter DumpConfigurationDisplayEventLog DisplayTraceLogEmailServerAddress EmailPasswordEmailNotifyAddress EmailUsernameFCHardAddress FCPortErrorsFCHard FCMultiNode FB2400 onlyIdentifyBridge FirmwareRestartHelp InfoReset FCPortErrors PasswordReadOnlyPassword RestoreConfigurationSCSIPortResetOnStartup SaveConfigurationSCSIPortReset RouteSCSIPortTermination SerialPortBaudRateSerialPortEcho SCSIPortWideTransferSNMPTraps SpeedWriteDefaultSNMPTrapAddress SNTPServerTraceLogFilter TimeZoneTraceLog UsernameZModem Appendix C Standards and compliances Declaration of ConformityCertification for the FibreBridge 2400 only Appendix D Warranty information

2400C/R/D, 2390C/R/D, 2370E specifications

ATTO Technology is a well-recognized name in the field of high-performance data storage and networking. Among its range of products, the ATTO 2390C/R/D, 2400C/R/D, and 2370E stand out due to their innovative features and advanced technologies tailored for demanding data environments. These devices are specifically designed for applications including digital media, video editing, and data-intensive tasks where speed and reliability are paramount.

The ATTO 2390 Series incorporates advanced features aimed at maximizing performance. One of its key characteristics is the support for multi-channel connectivity, which allows users to connect multiple systems and devices simultaneously. This is particularly beneficial in high-bandwidth applications where multiple data streams are processed simultaneously. In addition, the 2390 models feature a robust cache management system that accelerates data transfer rates, significantly reducing latency and enhancing overall efficiency.

The ATTO 2400 Series further enhances data management capabilities by supporting the latest protocol standards. This ensures compatibility with a wide range of storage systems and infrastructures, providing users with flexibility in their IT setups. Moreover, the 2400 models are optimized for PCIe Gen 4 technology, which delivers impressive throughput rates that cater to the most demanding applications, including 4K and 8K video editing.

The ATTO 2370E takes a slightly different approach, focusing on compatibility and scalability. Designed for high-performance computing environments, it features versatile connection options, including both SAS and SATA interfaces. This not only ensures high data transfer rates but also makes the device adaptable to various storage architectures, whether for entry-level consumers or enterprise solutions.

All three series integrate ATTO's proprietary Advanced Data Streaming (ADS) technology, allowing for smoother workflow by managing data transfers and reducing the bottleneck in high-load scenarios. This capability is essential for content production environments where seamless data handling is crucial.

In conclusion, the ATTO Technology 2390C/R/D, 2400C/R/D, and 2370E are pivotal in enhancing data storage solutions in today's fast-paced digital landscape. Combining high performance, compatibility with modern protocols, and intelligent data management features, these products are designed to meet the needs of professionals in media, entertainment, and enterprise sectors alike. With ATTO's commitment to innovation, users can expect reliable and efficient services that drive their productivity and workflow.
Top Page Image Contents