ATTO Technology 2400C/R/D, 2390C/R/D operation manual Atto FibreBridge 2370E

Page 8

1.1 ATTO FibreBridge 2370E

The ATTO FibreBridge 2370E is a 4-Gigabit Fibre Channel to SCSI bridge offering the ability to add 4-Gigabit Fibre Channel connectivity to Ultra320 SCSI devices.

The FibreBridge 2370E is available in an embeddable card for easy integration into storage devices.

Default values are appropriate for most applications. Refer to Configuring the FibreBridge on page 15 for more information.

Board dimensions

Width: 3.9 inches

Length: 7.995 inches

Height of tallest component: .55 inches on top,

0.1 inches on bottom

Cooling and airflow

Operating temperature: 0-40 °C

Humidity: 10-90% non-condensing

Power

 

 

 

 

The FibreBridge board

4-pin power connector

is powered from a

+12V GND GND +5V

standard 4-pin disk

1

2

3

4

drive power connector.

Input voltage and

power draw: 5.0V = 10 Watts, 12V = 24 Watts

Fibre Channel port

The 4-Gb Fibre Channel port uses a Small Formfactor Pluggable (SFP) interface. Its rate is set to automatic detection by default.

SCSI ports

The two independent SCSI ports are Ultra320 SCSI busses with internal HD68 connectors, downward compatible with all forms of single- ended SCSI and all previous SCSI protocols.

Management access

The 10/100 Base T Ethernet port is accessible from the RJ-45 connector to provide local and remote diagnostics, monitoring and management.

Aserial 10-pin header provides support for an RS- 232 remote monitoring and management port through the

Command Line Interface. The baud rate is programmable and preset at the factory to 115200 bps.

LED indicators

On-board LED indicators are on the board front or LED headers may be connected to outside panels. SCSI ports: a green LED indicates activity if it is lit, no activity if it is off.

Fibre Channel port: A green LED indicates activity if it is lit, no activity if it is off. A separate green LED indicates speed: you may set the LED to signify 1 Gb/sec or 2 Gb/sec if it is off or 4 Gb/sec or 2 Gb/sec if it is on. Refer to FCSpeedLED2G (FB2370E) on page ix of the Appendix.

A Ready LED lights green to indicate ready and is off to indicate not ready.

A Power Status LED is on to indicate 5V and 12V are applied to the board; flashing green indicates that 12V is applied but 5V is not.

A Yellow LED indicates fault status: off means

not faulted; on means faulted status.

Embedded in the Ethernet port connector: a

lighted green LED shows a valid link; off indicates that no link is present. A separate blinking yellow LED indicates activity.

3

ATTO Technology Inc. FibreBridge Installation and Operation Manual

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Atto FibreBridge Atto Technology, Inc Contents Installing the FibreBridge Configuring the FibreBridgeMap devices Remote monitoring, managementAppendix D Warranty information Xix Atto FibreBridge 2370E features, benefits Atto FibreBridge provides storage optionsAtto FibreBridge 2390C/R/D features, benefits Atto FibreBridge 2400C/R/D features, benefitsAtto FibreBridge 2370E LED Header P5 Pins LED Header P6 PinsDimensions Operating temperature 0-40 C externalAtto FibreBridge 2390R/D Fibre Channel interfaceManual reset switch LEDs on the front panel areHeight of tallest component .545 inches Input voltage Power draw 30 WattsAtto FibreBridge 2390C Page Atto FibreBridge 2400R/D Input voltage 100-240 VAC 1.7-.7A 50- 60HzLEDs on the faceplate are Power Atto FibreBridge 2400CInches Install the FibreBridge Unpack the packing box verify contentsInstall the FibreBridge Discover the IP addressInternet Explorer setup Begin initial configurationClick on Launch Browser Select Internet OptionsConfigure the FibreBridge Port configurationsModify passwords Preliminary stepsEnhance performance ManagementScsi device mapping Map devicesFibreBridge mapping Mapping devices manually Multiple Node addressing FB2400 onlyMapping devices automatically Remote monitoring, management Traps disabled SNMP-based monitoringRemote Management page appears Event Severity Extended ExplanationEmail messages provide error notification Vdda Vddb Vddc VdddEvent Severity Explanation Update firmware Using ExpressNAVUsing FTP Using the zModem commandClick Send File Using ExpressNAV Using the serial portInterface options Opening an ExpressNAV sessionUsing Telnet EnterAppendix a Cabling Scsi port connectionsFibre Channel connections Serial port connectionsCommand conventions Symbol Indicates Appendix B CLI provides ASCII-based interfaceCLI summary reference CLI error messagesCommand Default Example Ipdhcp Snmp Command explanations DumpConfiguration DisplayEventLogDisplayEventLogFilter DisplayTraceLogEmailPassword EmailNotifyAddressEmailServerAddress EmailUsernameFCPortErrors FCHardFCHardAddress FCMultiNode FB2400 onlyFirmwareRestart HelpIdentifyBridge InfoPassword ReadOnlyPasswordReset FCPortErrors RestoreConfigurationSaveConfiguration SCSIPortResetSCSIPortResetOnStartup RouteSerialPortBaudRate SerialPortEchoSCSIPortTermination SCSIPortWideTransferSpeedWriteDefault SNMPTrapAddressSNMPTraps SNTPServerTimeZone TraceLogTraceLogFilter UsernameZModem Appendix C Standards and compliances Declaration of ConformityCertification for the FibreBridge 2400 only Appendix D Warranty information

2400C/R/D, 2390C/R/D, 2370E specifications

ATTO Technology is a well-recognized name in the field of high-performance data storage and networking. Among its range of products, the ATTO 2390C/R/D, 2400C/R/D, and 2370E stand out due to their innovative features and advanced technologies tailored for demanding data environments. These devices are specifically designed for applications including digital media, video editing, and data-intensive tasks where speed and reliability are paramount.

The ATTO 2390 Series incorporates advanced features aimed at maximizing performance. One of its key characteristics is the support for multi-channel connectivity, which allows users to connect multiple systems and devices simultaneously. This is particularly beneficial in high-bandwidth applications where multiple data streams are processed simultaneously. In addition, the 2390 models feature a robust cache management system that accelerates data transfer rates, significantly reducing latency and enhancing overall efficiency.

The ATTO 2400 Series further enhances data management capabilities by supporting the latest protocol standards. This ensures compatibility with a wide range of storage systems and infrastructures, providing users with flexibility in their IT setups. Moreover, the 2400 models are optimized for PCIe Gen 4 technology, which delivers impressive throughput rates that cater to the most demanding applications, including 4K and 8K video editing.

The ATTO 2370E takes a slightly different approach, focusing on compatibility and scalability. Designed for high-performance computing environments, it features versatile connection options, including both SAS and SATA interfaces. This not only ensures high data transfer rates but also makes the device adaptable to various storage architectures, whether for entry-level consumers or enterprise solutions.

All three series integrate ATTO's proprietary Advanced Data Streaming (ADS) technology, allowing for smoother workflow by managing data transfers and reducing the bottleneck in high-load scenarios. This capability is essential for content production environments where seamless data handling is crucial.

In conclusion, the ATTO Technology 2390C/R/D, 2400C/R/D, and 2370E are pivotal in enhancing data storage solutions in today's fast-paced digital landscape. Combining high performance, compatibility with modern protocols, and intelligent data management features, these products are designed to meet the needs of professionals in media, entertainment, and enterprise sectors alike. With ATTO's commitment to innovation, users can expect reliable and efficient services that drive their productivity and workflow.
Top Page Image Contents