ATTO Technology 2370E SNMPTrapAddress, SNMPTraps, SNTPServer, SpeedWriteDefault, TailEventLog

Page 45

SNMPTrapAddress

Sets/displays the IP trap addresses and levels.Consult your network administrator for further assistance with SNMP.

Index: value between 1 and 6

IPAddress: standard IP address for the host receiving messages; must be in the same subnet as the FibreBridge

Trap Level: severity required for an event to trigger a trap:

None: no traps are sent to the address

ALL: all triggering events are sent

Warning: warning and critical events are sent

Critical: only critical events trigger a trap

Default: 0.0.0.0 none

set SNMPTrapAddress [Index] [IPAddress] [None All Warning Critical ]

get SNMPTrapAddress [index]

SNMPTraps

Controls SNMP trap functions.Consult your network administrator for further assistance with SNMP.

Default: disabled

set SNMPTraps [enabled disabled] get SNMPTraps

SNTP

Controls whether the FibreBridge contacts a specified SNTP time server to initialize or synchronize the time.

Default: enabled

set SNTP [enabled disabled]

Requires a SaveConfiguration Restart command get SNTP

SNTPServer

Controls/displays the main IP address of the SNTP time server. If the FibreBridge is unable to contact the specified SNTP timeserver within 30 seconds, the FibreBridge tries to contact the first auxiliary SNTP time server. If not successful, the FibreBridge tries to contact the second auxiliary server. If not successful, the FibreBridge continues to keep time based on the most recent SNTP time server, physical RTC or manual initialization or synchronization

Default: 192.43.244.18 (time.nist.gov) set SNTPServer xxx.xxx.xxx.xxx

Requires a SaveConfiguration Restart command get SNTPServer

SpeedWrite

SpeedWrite is a method to improve the performance of WRITE commands to SCSI tape devices attached to the FibreBridge. You can specify the SCSI bus, target and LUN of a mapped device or specify all to control the state of all currently mapped SCSI devices.

Default: all disabled

set SpeedWrite SCSI [sb st sl all] [enabled disabled] Requires a SaveConfiguration command

get SpeedWrite SCSI [sb st sl all]

SpeedWriteDefault

Specifies the state of SpeedWrite for any SCSI devices mapped manually or using an AutoMap command. If enabled, any new SCSI device uses SpeedWrite automatically.

Default: disabled

set SpeedWriteDefault [enabled disabled] Requires a SaveConfiguration command get SpeedWriteDefault

TailEventLog

Displays new events to the terminal. Type quit and press Enter to exit.

TailEventLog

Temperature (FB2390, FB2400 only) Displays the current internal temperature of the FibreBridge in degrees Celsius.

get Temperature

Time

Controls/displays the time in a 24-hour format. The default time is 00:00:00 and is accurate until the FibreBridge is reset or power-cycled when it returns to the default.Time cannot be set if SNTP is enabled.

Default: 0:00:00

set Time [HH :MM :SS]

Requires a SaveConfiguration command get Time

xiv

Image 45
Contents Atto FibreBridge Atto Technology, Inc Contents Configuring the FibreBridge Installing the FibreBridgeMap devices Remote monitoring, managementAppendix D Warranty information Xix Atto FibreBridge provides storage options Atto FibreBridge 2370E features, benefitsAtto FibreBridge 2400C/R/D features, benefits Atto FibreBridge 2390C/R/D features, benefitsAtto FibreBridge 2370E LED Header P6 Pins LED Header P5 PinsOperating temperature 0-40 C external DimensionsAtto FibreBridge 2390R/D Fibre Channel interfaceLEDs on the front panel are Manual reset switchInput voltage Power draw 30 Watts Atto FibreBridge 2390CHeight of tallest component .545 inches Page Input voltage 100-240 VAC 1.7-.7A 50- 60Hz Atto FibreBridge 2400R/DLEDs on the faceplate are Atto FibreBridge 2400C PowerInches Unpack the packing box verify contents Install the FibreBridgeInstall the FibreBridge Discover the IP addressBegin initial configuration Internet Explorer setupClick on Launch Browser Select Internet OptionsPort configurations Configure the FibreBridgeModify passwords Preliminary stepsManagement Enhance performanceMap devices FibreBridge mappingScsi device mapping Multiple Node addressing FB2400 only Mapping devices automaticallyMapping devices manually Remote monitoring, management SNMP-based monitoring Traps disabledRemote Management page appears Event Severity Extended ExplanationVdda Vddb Vddc Vddd Email messages provide error notificationEvent Severity Explanation Using ExpressNAV Update firmwareUsing FTP Using the zModem commandClick Send File Using the serial port Using ExpressNAVInterface options Opening an ExpressNAV sessionEnter Using TelnetScsi port connections Appendix a CablingFibre Channel connections Serial port connectionsAppendix B CLI provides ASCII-based interface Command conventions Symbol IndicatesCLI error messages Command Default ExampleCLI summary reference Ipdhcp Snmp Command explanations DisplayEventLog DumpConfigurationDisplayEventLogFilter DisplayTraceLogEmailNotifyAddress EmailPasswordEmailServerAddress EmailUsernameFCHard FCPortErrorsFCHardAddress FCMultiNode FB2400 onlyHelp FirmwareRestartIdentifyBridge InfoReadOnlyPassword PasswordReset FCPortErrors RestoreConfigurationSCSIPortReset SaveConfigurationSCSIPortResetOnStartup RouteSerialPortEcho SerialPortBaudRateSCSIPortTermination SCSIPortWideTransferSNMPTrapAddress SpeedWriteDefaultSNMPTraps SNTPServerTraceLog TimeZoneTraceLogFilter UsernameZModem Declaration of Conformity Appendix C Standards and compliancesCertification for the FibreBridge 2400 only Appendix D Warranty information

2400C/R/D, 2390C/R/D, 2370E specifications

ATTO Technology is a well-recognized name in the field of high-performance data storage and networking. Among its range of products, the ATTO 2390C/R/D, 2400C/R/D, and 2370E stand out due to their innovative features and advanced technologies tailored for demanding data environments. These devices are specifically designed for applications including digital media, video editing, and data-intensive tasks where speed and reliability are paramount.

The ATTO 2390 Series incorporates advanced features aimed at maximizing performance. One of its key characteristics is the support for multi-channel connectivity, which allows users to connect multiple systems and devices simultaneously. This is particularly beneficial in high-bandwidth applications where multiple data streams are processed simultaneously. In addition, the 2390 models feature a robust cache management system that accelerates data transfer rates, significantly reducing latency and enhancing overall efficiency.

The ATTO 2400 Series further enhances data management capabilities by supporting the latest protocol standards. This ensures compatibility with a wide range of storage systems and infrastructures, providing users with flexibility in their IT setups. Moreover, the 2400 models are optimized for PCIe Gen 4 technology, which delivers impressive throughput rates that cater to the most demanding applications, including 4K and 8K video editing.

The ATTO 2370E takes a slightly different approach, focusing on compatibility and scalability. Designed for high-performance computing environments, it features versatile connection options, including both SAS and SATA interfaces. This not only ensures high data transfer rates but also makes the device adaptable to various storage architectures, whether for entry-level consumers or enterprise solutions.

All three series integrate ATTO's proprietary Advanced Data Streaming (ADS) technology, allowing for smoother workflow by managing data transfers and reducing the bottleneck in high-load scenarios. This capability is essential for content production environments where seamless data handling is crucial.

In conclusion, the ATTO Technology 2390C/R/D, 2400C/R/D, and 2370E are pivotal in enhancing data storage solutions in today's fast-paced digital landscape. Combining high performance, compatibility with modern protocols, and intelligent data management features, these products are designed to meet the needs of professionals in media, entertainment, and enterprise sectors alike. With ATTO's commitment to innovation, users can expect reliable and efficient services that drive their productivity and workflow.