ATTO Technology 2370E, 2390C/R/D, 2400C/R/D operation manual LEDs on the faceplate are

Page 15

Manual reset switch

A manual reset switch reboots the FibreBridge.

To reset the FibreBridge, depress the reset button for no more than three seconds.

To restore factory defaults, press the reset button for more than four seconds until the green Ready LED blinks.

LED indicators

The LED indicators can be viewed from the connector side and the front side of the FibreBridge 2400R/D. (See Exhibit 1.4-1)

LEDs on the connector side are:

A bicolor Ready/Fault LED lights green to indicate ready, lights yellow to show a faulted condition, and is off to indicate not ready.

Embedded in the Ethernet port connector: a lighted green LED shows a valid link; off indicates

that no link is present. A separate blinking yellow LED indicates activity.

Fibre Channel port: A lighted green LED indicates link; off means no link. A separate green LED indicates activity if it is lit, no activity if it is off. SCSI ports: A green LED on each port indicates activity if is lit.

LEDs on the faceplate are:

A bicolor Ready/Fault LED is lighted green to indicate ready, lighted yellow to show a faulted condition, and off indicates not ready.

SCSI ports: A green LED on each port indicates activity if is lit.

Fibre Channel port: bicolor LED indicates FC speed. If it is off, speed is 1-Gb; if it is green, 2-Gb, and yellow indicates 4-Gb FC. A separate green LED indicates activity if it is lit, no activity if it is off.

Exhibit 1.4-1 Connectors, LEDs and power receptacle on the connector side and LEDs on the faceplate

air vents Ready/Fault LEDSCSI activity LEDs

FC activity & link LEDs

Power receptacle

 

Serial port

Ethernet port

SCSI ports

Reset switch

Fibre Channel ports

10

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Atto FibreBridge Atto Technology, Inc Contents Remote monitoring, management Installing the FibreBridgeConfiguring the FibreBridge Map devicesAppendix D Warranty information Xix Atto FibreBridge provides storage options Atto FibreBridge 2370E features, benefitsAtto FibreBridge 2400C/R/D features, benefits Atto FibreBridge 2390C/R/D features, benefitsAtto FibreBridge 2370E LED Header P6 Pins LED Header P5 PinsFibre Channel interface DimensionsOperating temperature 0-40 C external Atto FibreBridge 2390R/DLEDs on the front panel are Manual reset switchInput voltage Power draw 30 Watts Atto FibreBridge 2390CHeight of tallest component .545 inches Page Input voltage 100-240 VAC 1.7-.7A 50- 60Hz Atto FibreBridge 2400R/DLEDs on the faceplate are Atto FibreBridge 2400C PowerInches Discover the IP address Install the FibreBridgeUnpack the packing box verify contents Install the FibreBridgeSelect Internet Options Internet Explorer setupBegin initial configuration Click on Launch BrowserPreliminary steps Configure the FibreBridgePort configurations Modify passwordsManagement Enhance performanceMap devices FibreBridge mappingScsi device mapping Multiple Node addressing FB2400 only Mapping devices automaticallyMapping devices manually Remote monitoring, management Event Severity Extended Explanation Traps disabledSNMP-based monitoring Remote Management page appearsVdda Vddb Vddc Vddd Email messages provide error notificationEvent Severity Explanation Using the zModem command Update firmwareUsing ExpressNAV Using FTPClick Send File Opening an ExpressNAV session Using ExpressNAVUsing the serial port Interface optionsEnter Using TelnetSerial port connections Appendix a CablingScsi port connections Fibre Channel connectionsAppendix B CLI provides ASCII-based interface Command conventions Symbol IndicatesCLI error messages Command Default ExampleCLI summary reference Ipdhcp Snmp Command explanations DisplayTraceLog DumpConfigurationDisplayEventLog DisplayEventLogFilterEmailUsername EmailPasswordEmailNotifyAddress EmailServerAddressFCMultiNode FB2400 only FCPortErrorsFCHard FCHardAddressInfo FirmwareRestartHelp IdentifyBridgeRestoreConfiguration PasswordReadOnlyPassword Reset FCPortErrorsRoute SaveConfigurationSCSIPortReset SCSIPortResetOnStartupSCSIPortWideTransfer SerialPortBaudRateSerialPortEcho SCSIPortTerminationSNTPServer SpeedWriteDefaultSNMPTrapAddress SNMPTrapsUsername TimeZoneTraceLog TraceLogFilterZModem Declaration of Conformity Appendix C Standards and compliancesCertification for the FibreBridge 2400 only Appendix D Warranty information

2400C/R/D, 2390C/R/D, 2370E specifications

ATTO Technology is a well-recognized name in the field of high-performance data storage and networking. Among its range of products, the ATTO 2390C/R/D, 2400C/R/D, and 2370E stand out due to their innovative features and advanced technologies tailored for demanding data environments. These devices are specifically designed for applications including digital media, video editing, and data-intensive tasks where speed and reliability are paramount.

The ATTO 2390 Series incorporates advanced features aimed at maximizing performance. One of its key characteristics is the support for multi-channel connectivity, which allows users to connect multiple systems and devices simultaneously. This is particularly beneficial in high-bandwidth applications where multiple data streams are processed simultaneously. In addition, the 2390 models feature a robust cache management system that accelerates data transfer rates, significantly reducing latency and enhancing overall efficiency.

The ATTO 2400 Series further enhances data management capabilities by supporting the latest protocol standards. This ensures compatibility with a wide range of storage systems and infrastructures, providing users with flexibility in their IT setups. Moreover, the 2400 models are optimized for PCIe Gen 4 technology, which delivers impressive throughput rates that cater to the most demanding applications, including 4K and 8K video editing.

The ATTO 2370E takes a slightly different approach, focusing on compatibility and scalability. Designed for high-performance computing environments, it features versatile connection options, including both SAS and SATA interfaces. This not only ensures high data transfer rates but also makes the device adaptable to various storage architectures, whether for entry-level consumers or enterprise solutions.

All three series integrate ATTO's proprietary Advanced Data Streaming (ADS) technology, allowing for smoother workflow by managing data transfers and reducing the bottleneck in high-load scenarios. This capability is essential for content production environments where seamless data handling is crucial.

In conclusion, the ATTO Technology 2390C/R/D, 2400C/R/D, and 2370E are pivotal in enhancing data storage solutions in today's fast-paced digital landscape. Combining high performance, compatibility with modern protocols, and intelligent data management features, these products are designed to meet the needs of professionals in media, entertainment, and enterprise sectors alike. With ATTO's commitment to innovation, users can expect reliable and efficient services that drive their productivity and workflow.
Top Page Image Contents