Load Default
Press ESC to return to the main menu then use the ENT button to select. This function resets all settings to their factory default. This function helps the system recover from errors caused by an illegal operation.
Load Default
Press ENT to enter the following screen. Use the Up and Down buttons to conrm reset to factory defaults.
Load Default
Cong? Yes
If Load Default OK, this will be displayed on the LCD as shown below.
Load Default
Ok
Copy HPA
If this function is set to "ON", the system will completely copy the data in a source HDD's host protected area.
Copy HPA
The default is "OFF". Use the ENT , Up and Down buttons to change this to "On".
Burn In
This function is used to burn test the system reliability.
Burn In
Press ENT to enter the following screen.
Burn In Mode
Copy & Compare
Use the Up and Down buttons to choose Compare, Async Copy & Cmp and Async Compare, then press ENT to conrm.
www.addonics.com
Technical Support | Phone: | Email: www.addonics.com/support/query/ |