Copy HDD
Copy HDD copies data directly from the source hard disk to the target hard disk. Please make sure that the capacity of the target hard disk is equal or larger than the source hard disk.
Choose option 1 from the menu:
1.Copy HDD HDD:11 232.9GB
Press ENT to begin copy. The system will
The LCD will show the following info during the copying process: elapsed time, completed percentage. The copy speed, capacity and time will vary depending on the source hard disk. Once the copying process is complete the LCD will display the following results.
Copy HDD
OK: 11 | Fail: 0 |
Async Copy HDD
This option is used to specify the size of the source for simplifying further copying operations. Choose option 2 from the menu:
2.Async Copy HDD HDD:10 232.9GB
Press ENT . Before the start of the reproduction, if the console detects that a hard drive capacity is less than source, then the LCD will show the corresponding channel number.
8
Space Not Enough
And then automatically copies. The LCD will display the following info.
If the replication process to continue to add additional hard disk device, LCD will only show the last completed percentage.
Once the copying process is complete the LCD will display the following results.
Async Copy HDD
OK: 11 Fail: 0
Compare
Compare HDD is used to see if the data on a source hard disk is identical to the target hard disk after the Copy HD operation.
Choose option 3 from the menu:
www.addonics.com
Technical Support | Phone: | Email: www.addonics.com/support/query/ |