ReScan Bus
ReScan Bus allows swapping the source or target in and out without having to reboot the system.
Choose option 6 from the menu:
6. ReScan BUS
Press ENT to
Yes
When the scan is complete the LCD will display the fol lowing info.
Bus re- scan OK!
Source Size
Source Size is used to show the capacity of the source.
Choose option 7 from the menu:
7. Source Size
Press ENT and the LCD will show the following info.
HDD:Hitachi
Size:232.9GB
Then press ENT and the LCD will show the data's size info.
HDD:Hitachi
Data:200.9GB
Secure Erase
Secure Erase is used to wipe the data of the hard disk, i t will erase all of HDD of duplicator (included Source HDD).
Choose option 8 from the menu:
|
| 8. Secure Erase |
| |
|
|
|
|
|
Press | ENT to access option. By default it is set to No. Use the Up and Down arrow keys to choose | |||
Yes. |
|
|
|
|
|
|
|
| |
|
| Wipe all data. |
| |
|
| Continue? No |
| |
|
|
|
| |
Press | ENT and the LCD will show the following info. | |||
www.addonics.com
Technical Support | Phone: | Email: www.addonics.com/support/query/ |