Tripp Lite BP240V10RT-3U owner manual Features, Power Module Front Panel Controls

Page 5

Features

There are three separate UPS system modules available from Tripp Lite (a power module, a transformer module and a battery module) used in a variety of combinations. Familiarize yourself with the location and function of the features on each module before installing and oper- ating your UPS system. The power module is the only module which includes front panel features.

Power Module Front Panel Controls

12

1

11

10

9

8

7

6

12

2 3 4 5

1.LCD DISPLAY: This backlit (16 × 2 character) dot matrix display indicates a wide range of UPS operating conditions and diagnostic data. It also displays UPS settings and options when the UPS is in setup mode.

2.ON/MUTE BUTTON: Press this button and hold it until you hear a beep to turn the UPS system’s inverter ON. If the UPS’s battery alarm is sounding, press this button to silence it.

3.SCROLL DOWN/EXIT SETUP BUTTON: This button allows you to browse through different options and power readings on the LCD display. Momentarily pressing it causes the LCD screen to display a different power reading (see “Operation”). Pressing it and the SCROLL UP Button together puts the UPS in setup mode, where this button is used to scroll through setup options and to exit setup mode.

4.SCROLL UP/SELECT BUTTON: This button allows you to browse through different options and power readings on the LCD dis- play. Momentarily pressing it causes the LCD screen to display a different power reading (see “Operation”). Pressing it and the SCROLL DOWN Button together puts the UPS in setup mode, where this button is used to select setup options.

5.OFF BUTTON: Press this button until you hear a beep to turn the UPS system’s inverter OFF.

6.O/P (OUTPUT) LED: This green light will illuminate to indicate your UPS is supplying AC power to connected equipment.

7.DC/AC (INVERTER) LED: This green light will illuminate to indicate the UPS’s DC/AC inverter is activated.

8.BYPASS LED: This green light will illuminate when the UPS is providing filtered mains power without engaging its converter or inverter. If this LED is lit, connected equipment will not receive battery power in the event of a blackout.

9.AC/DC (Converter) LED: This green light will illuminate to indicate the UPS’s AC/DC converter is charging the connected battery pack(s).

10.BATTERY LED: This red light will illuminate when the UPS is discharging the battery to provide connected equipment with AC power. An alarm will sound which can be silenced by pressing the ON/MUTE Button. This LED will remain lit after the alarm is silenced.

11.I/P (INPUT) LED: This green light will illuminate to indicate an AC input supply is present.

12.ACCESS SLOTS: To rotate the controls, insert a flathead screwdriver into these slots and gently lever the panel out. Taking care not to excessively twist or yank the cables connecting the controls to the rest of the UPS, turn the controls to the desired orientation and reinsert them.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents SmartOnline Single-Phase 5kVA, 6kVA & 10kVA Important Safety Warnings Post Telecom Mounting Mounting RackPost Mounting Mounting Tower Power Module Front Panel Controls FeaturesFeatures Rear Panel see page 9 for feature descriptions 6kVA Battery Module 6kVA Power Module 6kVA Transformer ModuleFeatures Rear Panel see page 9 for feature descriptions Power Module Feature Description Features Rear PanelConnection Battery Module Feature DescriptionConnect the battery module to the power module Plug your equipment into the power modulePlug the power module into a wall receptacle Plug the transformer module into the power module Hardwire the power module to a utility power source Hardwire the power module to your equipmentHardwire the transformer module to a utility Power source Connect the power module to the transformer moduleHardwire the transformer module to your equipment Select the transformer module’s input voltage Hardwire the power module to the transformer module240V AC RS-232 Serial Communication Connection Optional ConnectionPower ON/OFF 5kVA models only Power ON/OFF 6kVA and 10kVA models only Manual Bypass Operation 6kVA and 10kVA models Only for power module maintenance or replacementFailed Self-Test OperationStartup Self-Test Overload Messages On Battery AlarmNormal Operation Shutdown Messages Bypass MessagesYear Limited Warranty ServiceStorage Regulatory Compliance Identification NumbersSU6000RT3UXR SU10KRT3UHV* & SU10KRT3U SpecificationsManual del propietario Advertencias de seguridad importantes Montaje de 2 postes Telecomunicaciones Montaje BastidorMontaje de 4 postes Montaje en torre Controles del panel frontal del módulo de potencia CaracterísticasPage Módulo de batería para modelo de 6 kVA Módulo de potencia de 6 kVA Módulo de transformador de 6 kVACaracterísticas Panel posterior Descripción de características del módulo del transformador Características Panel continuaciónDescripción de características del módulo de potencia Descripción de características del módulo de batería ConexiónConecte el módulo de batería al módulo de potencia Conecte su equipo en el módulo de potenciaConecte el módulo de transformador en el módulo de potencia Cablee el módulo de potencia a su equipo Cablee el módulo de transformador a su equipo Conecte el módulo de potencia al módulo De transformadorCablee el módulo de potencia al módulo de transformador Seleccione el voltaje de entrada del módulo De transformadorEntrada Interruptor de Interruptores/pantalla Conexión de comunicación serie RS-232 Conexión opcionalEncendido y apagado sólo en modelos de 5 kVA Encendido y apagado Sólo en modelos de 6 kVA y 10 kVA Page Fallo durante la auto-prueba OperaciónAuto-prueba de arranque Mensajes de sobrecarga Alarma On BatteryOperación normal Mensajes de apagado Mensajes BypassAlmacenamiento Almacenamiento, Servicio y GarantíaServicio Garantía limitada de 2 añosSU6000RT3UXR EspecificacionesManuel de lutilisateur Avertissements pour Connexion de lEquipement Consignes de Sécurité ImportantesMontage à 2 supports Telecom Montage BaieMontage à 4 supports Montage Tour Caractéristiques Commandes de Panneau Avant de Module dAlimentation2524 Module Batterie pour Modèle 6kVA Module Alimentation 6kVA Module Transformateur 6kVAPage Description des Caractéristiques de Module dAlimentation Caractéristiques Panneau Arrière suiteDescription des Caractéristiques de Module de Batterie ConnexionBranchez votre équipement dans le module Dalimentation Connexion suiteBranchez le module dalimentation dans une prise Murale Branchez le module à piles au module dalimentationConnexion suite Câbler le module dalimentation à votre équipement Câbler le module du transformateur à votre équipement Sélectionner la tension dentrée du module du transformateur Sélectionner la tension dentrée du module Du transformateur Connexion Communication Série RS-232 Connexion en OptionAlimentation en Marche/Arrêtée modèles 5kVA seulement Alimentation ON/OFF Modèles 6kVA et 10kVA seulement Opération Bypass Manuelle Modèles 6kVA et 10kVA seulement Echec de lAutotest FonctionnementAutotest de Démarrage Fonctionnement suite Alarme Sur BatterieFonctionnement Normal Messages de SurchargeMessages de Fermeture Messages de BypassEntreposage Entreposage, Entretien, Garantie et AssuranceEntretien Garantie Limitée à 2 AnsInformation sur le modèle Nos de modèle SpécificationsÈíñòðóêöèÿ âëàäåëüöà Âàæíàÿ èíñòðóêöèÿ ïî áåçîïàñíîñòè Óñòàíîâêà òåëåêîì íà 2õ îñíîâàõ Óñòàíîâêà ÑòåëëàæÓñòàíîâêà 4-êîíòàêòíîãî ñòåëëàæà Óñòàíîâêà Áàøíÿ Ïåðåäíÿÿ Ïàíåëü Áëîêà Ïèòàíèÿ ÑâîéñòâàÌîäóëü Áàòàðåè äëÿ ìîäåëåé 6ÊÂÀ è 10ÊÂÀ 6ÊÂÀ Áëîê Ïèòàíèÿ 6ÊÂÀ Ìîäóëü Èçîëèðóþùèé Òðàíñôîðìàòîð2120 Îïèñàíèå Ñâîéñòâ Ìîäóëÿ Áàòàðåè 6ÊÂÀ è 10ÊÂÀ Ñâîéñòâà Çàäíÿÿ Ïàíåëü ïðîäîëæåíèåÎïèñàíèå Ñâîéñòâ Áëîêà ïèòàíèÿ ìîäåëè 6ÊÂÀ è 10ÊÂÀ Ñîåäèíèòå âàø ìîäóëü ïèòàíèÿ ñ îáîðóäîâàíèåì ÑîåäèíåíèåÑîåäèíèòå áëîê ïèòàíèÿ ñ èñòî÷íèêîì ýëåêòðîýíåðãèè Ñîåäèíèòå ìîäóëü áàòàðåè ñ ìîäóëÿìè áëîêà ïèòàíèÿÑîåäèíèòå ìîäóëü áëîêà ïèòàíèÿ ñ ìîäóëåì Òðàíñôîðìàòîðà Ñîåäèíåíèå ïðîäîëæåíèåÑîåäèíèòå ìîäóëü òðàíñôîðìàòîðà ñ âàøèì Îáîðóäîâàíèåì Ñîåäèíèòå ìîäóëü òðàíñôîðìàòîðà ñ èñòî÷íèêîìÑîåäèíèòå ìîäóëü áàòàðåè ñ ìîäóëåì òðàíñôîðìàòîðà Âûáåðèòå íàïðÿæåíèå ââîäà íà ìîäóëå òðàíñôîðìàòîðàÑîåäèíèòå âàø ìîäóëü òðàíñôîðìàòîðà ñ Îáîðóäîâàíèåì Ñâÿçü ÷åðåç Óíèâåðñàëüíûé Ñåðèéíûé Ïîðò USB RS-232 Äîïîëíèòåëüíîå ñîåäèíåíèåÂÊËÞ×ÈÒÜ/ÂÛÊËÞ×ÈÒÜ Page Ñàìîñòîÿòåëüíûé ïðîâåðî÷íûé òåñò íå ïðîéäåí Ïðàâèëà ÏîëüçîâàíèÿÑàìîñòîÿòåëüíûé Ïðîâåðî÷íûé Òåñò Ñòàðòà Íîðìàëüíîå Ïîëüçîâàíèå Ïðàâèëà Ïîëüçîâàíèÿ, ïðîäîëæåíèåÇâóêîâîé Ñèãíàë Îò Áàòàðåè Ñîîáùåíèÿ î ÏåðåãðóçêåÑîîáùåíèÿ ïî îòêëþ÷åíèþ Ñîîáùåíèå î Ðåæèìå Ïåðåìû÷êèÎãðàíè÷åííàÿ 2õ ëåòíÿÿ ãàðàíòèÿ Ñåðâèñ/ÃàðàíòèÿÑåðâèñ SU6000RT3UXR ÑïåöèôèêàöèèTh Street Chicago, IL 60609 USA

BP240V10RT-3U specifications

The Tripp Lite BP240V10RT-3U is a robust battery pack designed to extend the runtime of compatible Tripp Lite UPS systems. With an impressive construction and advanced features, it caters to users requiring reliable backup power for critical applications.

One of the standout features of the BP240V10RT-3U is its scalability. It can be connected with other compatible battery packs to expand backup capacity, delivering users the flexibility to customize their power solutions based on specific requirements. This makes it an excellent choice for both small businesses and enterprise-level environments.

The BP240V10RT-3U is equipped with 10U of rack space, making it suitable for standard 19-inch racks. This design enhances easy integration within existing setups, allowing users to optimize their server or network rooms without sacrificing vital space. The compact design, combined with its lightweight construction, ensures that installation and transport do not become cumbersome tasks.

In terms of power, the BP240V10RT-3U features a high-capacity 240-volt output, which ensures that it can support multiple devices simultaneously, providing ample backup for various applications, from servers to network equipment. The UPS systems that are compatible with this battery pack are known for their efficiency and ability to deliver consistent power, making the BP240V10RT-3U an essential companion for those systems.

The battery pack also features hot-swappable batteries, allowing users to replace the batteries without shutting down connected devices. This feature is crucial in mission-critical environments where uptime is essential. Maintenance becomes convenient and non-disruptive, enabling organizations to stay operational while ensuring their power sources are always in optimal condition.

For monitoring and management, the BP240V10RT-3U can integrate seamlessly with Tripp Lite’s software solutions, providing users with visibility into battery status and power conditions. This connectivity ensures that potential issues are addressed promptly, enhancing overall reliability.

With a combination of scalability, power output, and easy maintenance, the Tripp Lite BP240V10RT-3U stands out as a leading choice for those seeking an efficient and reliable expandable battery pack. Its features make it particularly appealing for businesses looking to safeguard their operations against power interruptions while maintaining a streamlined and organized infrastructure.
Top Page Image Contents