Tripp Lite BP240V10RT-3U owner manual Normal Operation, On Battery Alarm, Overload Messages

Page 22

Operation continued

Normal Operation

During normal operation, the first line of your LCD Display shows which operating mode your UPS is in: Online, Economy, On Battery, or Bypass.

Online mode: The UPS provides AC power while utility power is available and switches to On Battery mode instantly (zero transfer time) if AC power is interrupted.

Economy mode: The UPS provides AC power at high efficiency while utility power is available and switches to On Battery mode quickly if AC power is interrupted.

On Battery mode: The UPS provides AC power from battery backup so long as battery power lasts. It switches back to Online or Economy mode if utility power is available and shuts down if it runs out of battery power.

Bypass mode: The UPS provides AC power while utility power is available. The UPS shuts down if AC power is interrupted.

The second line of the LCD Display shows basic power conditions. Push the SCROLL buttons to browse through these basic power conditions in the sequence shown below.

▼

XXXXMODE

LOAD = XXX% X.XXKW

▼▲

XXXXMODE

IN = XXXV XX.X Hz

▼▲

XXXXMODE

OUT = XXXV XX.X Hz

▼▲

XXXXMODE

BATTERY = XXXVDC

▼

On Battery Alarm

When in the On Battery mode, the UPS power module will beep to inform you that it is using battery power to support connected equipment. If its connected batteries are at more than half capacity, it will beep every two seconds. If its connected batteries are below half capacity, it will beep twice a second. If its connected batteries are nearly depleted, the UPS power module will beep continuously.

To silence the On Battery Alarm, press the “ON/MUTE” button.

Overload Messages

When the UPS detects an output overload, its LCD will switch to the following display:

OVERLOAD!

LOAD = XXX% X.XXKW

The UPS will then begin a countdown. If the UPS is still overloaded at the end of the countdown, the UPS will automatically go to Bypass Mode to protect its inverter. The duration of the countdown varies with the severity of the overload, as follows:

	Overload Condition	Countdown Duration
	102% - 125%	1 minute
	125% - 150%	30 seconds
>150%		Immediate

22

Image 22

Contents SmartOnline Single-Phase 5kVA, 6kVA & 10kVA Important Safety Warnings Post Mounting Mounting RackPost Telecom Mounting Mounting Tower Features Power Module Front Panel ControlsFeatures Rear Panel see page 9 for feature descriptions 6kVA Power Module 6kVA Transformer Module 6kVA Battery ModuleFeatures Rear Panel see page 9 for feature descriptions Features Rear Panel Power Module Feature DescriptionBattery Module Feature Description ConnectionPlug the power module into a wall receptacle Plug your equipment into the power moduleConnect the battery module to the power module Plug the transformer module into the power module Hardwire the power module to your equipment Hardwire the power module to a utility power sourceHardwire the transformer module to your equipment Connect the power module to the transformer moduleHardwire the transformer module to a utility Power source Hardwire the power module to the transformer module Select the transformer module’s input voltage240V AC Optional Connection RS-232 Serial Communication ConnectionPower ON/OFF 5kVA models only Power ON/OFF 6kVA and 10kVA models only Only for power module maintenance or replacement Manual Bypass Operation 6kVA and 10kVA modelsStartup Self-Test OperationFailed Self-Test Normal Operation On Battery AlarmOverload Messages Bypass Messages Shutdown MessagesStorage ServiceYear Limited Warranty Regulatory Compliance Identification NumbersSpecifications SU6000RT3UXR SU10KRT3UHV* & SU10KRT3UManual del propietario Advertencias de seguridad importantes Montaje de 4 postes Montaje BastidorMontaje de 2 postes Telecomunicaciones Montaje en torre Características Controles del panel frontal del módulo de potenciaPage Módulo de potencia de 6 kVA Módulo de transformador de 6 kVA Módulo de batería para modelo de 6 kVACaracterísticas Panel posterior Descripción de características del módulo de potencia Características Panel continuaciónDescripción de características del módulo del transformador Conexión Descripción de características del módulo de bateríaConecte su equipo en el módulo de potencia Conecte el módulo de batería al módulo de potenciaConecte el módulo de transformador en el módulo de potencia Cablee el módulo de potencia a su equipo Conecte el módulo de potencia al módulo De transformador Cablee el módulo de transformador a su equipoSeleccione el voltaje de entrada del módulo De transformador Cablee el módulo de potencia al módulo de transformadorEntrada Interruptor de Interruptores/pantalla Conexión opcional Conexión de comunicación serie RS-232Encendido y apagado sólo en modelos de 5 kVA Encendido y apagado Sólo en modelos de 6 kVA y 10 kVA Page Auto-prueba de arranque OperaciónFallo durante la auto-prueba Operación normal Alarma On BatteryMensajes de sobrecarga Mensajes Bypass Mensajes de apagadoServicio Almacenamiento, Servicio y GarantíaAlmacenamiento Garantía limitada de 2 añosEspecificaciones SU6000RT3UXRManuel de lutilisateur Consignes de Sécurité Importantes Avertissements pour Connexion de lEquipementMontage à 4 supports Montage BaieMontage à 2 supports Telecom Montage Tour Commandes de Panneau Avant de Module dAlimentation Caractéristiques2524 Module Alimentation 6kVA Module Transformateur 6kVA Module Batterie pour Modèle 6kVAPage Caractéristiques Panneau Arrière suite Description des Caractéristiques de Module dAlimentationConnexion Description des Caractéristiques de Module de BatterieBranchez le module dalimentation dans une prise Murale Connexion suiteBranchez votre équipement dans le module Dalimentation Branchez le module à piles au module dalimentationConnexion suite Câbler le module dalimentation à votre équipement Câbler le module du transformateur à votre équipement Sélectionner la tension dentrée du module du transformateur Sélectionner la tension dentrée du module Du transformateur Connexion en Option Connexion Communication Série RS-232Alimentation en Marche/Arrêtée modèles 5kVA seulement Alimentation ON/OFF Modèles 6kVA et 10kVA seulement Opération Bypass Manuelle Modèles 6kVA et 10kVA seulement Autotest de Démarrage FonctionnementEchec de lAutotest Fonctionnement Normal Alarme Sur BatterieFonctionnement suite Messages de SurchargeMessages de Bypass Messages de FermetureEntretien Entreposage, Entretien, Garantie et AssuranceEntreposage Garantie Limitée à 2 AnsSpécifications Information sur le modèle Nos de modèleÈíñòðóêöèÿ âëàäåëüöà Âàæíàÿ èíñòðóêöèÿ ïî áåçîïàñíîñòè Óñòàíîâêà 4-êîíòàêòíîãî ñòåëëàæà Óñòàíîâêà ÑòåëëàæÓñòàíîâêà òåëåêîì íà 2õ îñíîâàõ Óñòàíîâêà Áàøíÿ Ñâîéñòâà Ïåðåäíÿÿ Ïàíåëü Áëîêà Ïèòàíèÿ6ÊÂÀ Áëîê Ïèòàíèÿ 6ÊÂÀ Ìîäóëü Èçîëèðóþùèé Òðàíñôîðìàòîð Ìîäóëü Áàòàðåè äëÿ ìîäåëåé 6ÊÂÀ è 10ÊÂÀ2120 Îïèñàíèå Ñâîéñòâ Áëîêà ïèòàíèÿ ìîäåëè 6ÊÂÀ è 10ÊÂÀ Ñâîéñòâà Çàäíÿÿ Ïàíåëü ïðîäîëæåíèåÎïèñàíèå Ñâîéñòâ Ìîäóëÿ Áàòàðåè 6ÊÂÀ è 10ÊÂÀ Ñîåäèíèòå áëîê ïèòàíèÿ ñ èñòî÷íèêîì ýëåêòðîýíåðãèè ÑîåäèíåíèåÑîåäèíèòå âàø ìîäóëü ïèòàíèÿ ñ îáîðóäîâàíèåì Ñîåäèíèòå ìîäóëü áàòàðåè ñ ìîäóëÿìè áëîêà ïèòàíèÿÑîåäèíèòå ìîäóëü òðàíñôîðìàòîðà ñ âàøèì Îáîðóäîâàíèåì Ñîåäèíåíèå ïðîäîëæåíèåÑîåäèíèòå ìîäóëü áëîêà ïèòàíèÿ ñ ìîäóëåì Òðàíñôîðìàòîðà Ñîåäèíèòå ìîäóëü òðàíñôîðìàòîðà ñ èñòî÷íèêîìÂûáåðèòå íàïðÿæåíèå ââîäà íà ìîäóëå òðàíñôîðìàòîðà Ñîåäèíèòå ìîäóëü áàòàðåè ñ ìîäóëåì òðàíñôîðìàòîðàÑîåäèíèòå âàø ìîäóëü òðàíñôîðìàòîðà ñ Îáîðóäîâàíèåì Äîïîëíèòåëüíîå ñîåäèíåíèå Ñâÿçü ÷åðåç Óíèâåðñàëüíûé Ñåðèéíûé Ïîðò USB RS-232ÂÊËÞ×ÈÒÜ/ÂÛÊËÞ×ÈÒÜ Page Ñàìîñòîÿòåëüíûé Ïðîâåðî÷íûé Òåñò Ñòàðòà Ïðàâèëà ÏîëüçîâàíèÿÑàìîñòîÿòåëüíûé ïðîâåðî÷íûé òåñò íå ïðîéäåí Çâóêîâîé Ñèãíàë Îò Áàòàðåè Ïðàâèëà Ïîëüçîâàíèÿ, ïðîäîëæåíèåÍîðìàëüíîå Ïîëüçîâàíèå Ñîîáùåíèÿ î ÏåðåãðóçêåÑîîáùåíèå î Ðåæèìå Ïåðåìû÷êè Ñîîáùåíèÿ ïî îòêëþ÷åíèþÑåðâèñ Ñåðâèñ/ÃàðàíòèÿÎãðàíè÷åííàÿ 2õ ëåòíÿÿ ãàðàíòèÿ Ñïåöèôèêàöèè SU6000RT3UXRTh Street Chicago, IL 60609 USA