Tripp Lite SU8000RT4U, SU6000RT4U, SU5000RT4U owner manual Storage, Service

Page 15

Internal Battery Replacement

Under normal conditions, the original batteries in your UPS will last many years. See Safety section before replacing batteries. The batteries are designed for hot-swap replacement (i.e. leaving the UPS ON), but some qualified service personnel may wish to completely turn the UPS OFF and disconnect equipment before proceeding.

1Remove Front Panel and Battery Cover Plate

2Disconnect Batteries

3Remove/Dispose of Batteries

4Add Batteries

5Connect Batteries. Attach connectors: black-to-black and red-to-red

6Replace Battery Cover Plate and Front Panel

1

6

2

5

3

4

Storage

Before storing your UPS, turn it completely OFF. If you store your UPS for an extended period of time, recharge the UPS batteries for 4 to 6 hours once every three months. Note: after you connect the UPS to utility power, it will automatically begin charging its batteries. If you leave your UPS batteries discharged for an extended period of time, they will suffer a permanent loss of capacity.

Service

Your SmartOnline UPS is covered by the 2-year limited warranty period described on the next page. A variety of Extended Warranty and On-Site Service Programs are also available from Tripp Lite. For more information on service, call Tripp Lite Customer Support at (773) 869-1234.

Before returning your UPS for service, follow these steps:

1.Review the installation and operation instructions in this manual to ensure that the service problem does not originate from a misreading of the instructions.

2.If the problem continues, do not contact or return the UPS to the dealer. Instead, call Tripp Lite at (773) 869-1233. A service technician will ask for the UPS's model number, serial number and purchase date and will attempt to correct the problem over the phone.

3.If the problem requires service, the technician will issue you a Returned Material Authorization (RMA) number, which is required for service. They will also discuss proper packaging and shipping procedures. Any damages (direct, indirect, special, incidental or consequential) to the UPS incurred during shipment to Tripp Lite or an authorized Tripp Lite service center is not covered under warranty. UPS Systems shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation charges prepaid. Mark the RMA number on the outside of the package. If the UPS System is within the 2-year warranty period, enclose a copy of your sales receipt. Return the UPS for service using an insured carrier to the address given to you by the Tripp Lite service technician.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Registration Español FrançaisImportant Safety Warnings Front Panel Controls Features Mounting 2-Post Rackmount Mounting Tower Mounting 4-Post RackmountPlug your UPSs line cord into an electrical outlet Plug your equipment into your UPSTurn the UPS on EPO Port Connection USB and RS-232 Serial Communication ConnectionUPS Power/Battery Module Removal Manual Bypass Operation for UPS maintenance or replacementHigh Voltage Risk of electrical shock High Voltage WarningsOperation Startup Self-TestFailed Self-Test Normal Operation On Battery AlarmAdditional Self-Test Output Voltage SelectionBypass Messages Overload MessagesOP2 Shortcircuit Shutdown MessagesStorage ServiceWarranty Registration WarrantyEnglish Français Manual del propietarioAdvertencias de seguridad importantes Controles del panel frontal Características continuación Montaje montaje en bastidor de 4 postes Montaje montaje en bastidor de 2 postesMontaje en torre Precauciones para Instalar el Cableado Eléctrico Fijo Conecte sus equipos en el UPSEncienda el UPS Inserción de tarjeta interna SNMP/WEB Conexión de comunicaciones USB y serie RS-232Conexión de puerto EPO Conexión de baterías externasRetiro del módulo de potencia/batería del UPS Operación de bypass manual mantenimiento o reemplazo del UPSAdvertencias de alto voltaje ¡Alto voltaje ¡Riesgo de choque eléctrico¡Alto voltaje Operación Auto-prueba de arranqueFallo durante la auto-prueba Operación normal Alarma On Battery Con bateríaAuto-Prueba Adicional Selección del Voltaje de SalidaMensajes de Bypass Mensajes de sobrecargaMensajes de apagado Servicio AlmacenamientoCumplimiento de las normas Números de identificación Aviso de FCC sobre interferencia de radio /TVEnglish Español Manuel du propriétaireImportantes mises en garde de sécurité Commandes du panneau avant Caractéristiques suite Montage sur bâti à quatre montants Montage sur bâti à 2 poteauxMontage Tour Mettre lUPS en marche Brancher le cordon de lUPS dans une prise électriqueMises en garde concernant le câblage Connecter votre équipement à lUPSConnexion de batterie externe Connexions optionnellesPort série de communication USB et RS-232 Connexion au port EPOEnlèvement du module alimentation/batterie de lUPS Mise en Garde Haute tension Risque de choc électrique Mises en Garde Haute tensionFonctionnement Autotest de démarrageÉchec de lautotest Alarme en mode batterie Fonctionnement suiteFonctionnement normal Autre auto-test Sélection de la tension de sortieMessages de Bypass Messages de surchargeMessages sarrêt Garantie Limitée DE 2 ANS Entreposage200705052
Related manuals
Manual 52 pages 59.76 Kb

SU5000RT4U, SU6000RT4U, SU8000RT4U specifications

Tripp Lite is a renowned name in the realm of power protection solutions, and their line of uninterruptible power supplies (UPS) stands out for providing superior performance and advanced features. The Tripp Lite SU6000RT4U, SU5000RT4U, and SU8000RT4U are all remarkable options designed for various applications, ensuring consistent power delivery and robust protection against electrical disturbances.

The SU6000RT4U is a 6000VA/5400W UPS system that offers exceptional reliability to safeguard your critical equipment. It features a dual-conversion online design, which guarantees a steady output voltage regardless of fluctuations in input power. The hot-swappable batteries allow for uninterrupted power, ensuring that maintenance can occur without downtime. The graphical LCD display provides real-time information about UPS status, input/output voltage, and battery condition, enabling users to monitor performance effortlessly.

Next in line, the SU5000RT4U offers a 5000VA/4500W capacity and similar technological advancements. This model is engineered to support high-sensitive equipment, making it perfect for data centers, networking devices, and other critical applications. It includes advanced surge protection, ensuring that any spikes in electricity do not cause damage to connected devices. Like the SU6000RT4U, it also employs a dual-conversion design for superior power quality.

The SU8000RT4U is an impressive 8000VA/7200W UPS that caters to demanding applications. In addition to the features found in the smaller models, it boasts an extensive runtime, allowing it to sustain operations during prolonged power outages. This model also supports advanced management options, such as SNMP networking capabilities, which grants users the ability to monitor and manage the UPS remotely via any networked device. The battery management technology extends battery life and enhances performance, making it a standout choice for high-efficiency environments.

All three Tripp Lite UPS units are designed with foolproof safety measures, including automatic voltage regulation, isolating transformers, and thermal protection to promote longevity and reliability. Built with a rugged metal housing, they ensure durability in a variety of conditions. Compact and rack-mountable, these UPS systems fit seamlessly into data racks or server environments. With their robust features, the SU6000RT4U, SU5000RT4U, and SU8000RT4U ensure that your valuable equipment is always protected from the unpredictability of power supply issues.
Top Page Image Contents