Tripp Lite SU1000XL, SU2200XL, SU3000XL owner manual Basic Operation, Rear Panel

Page 4

Basic Operation (continued)

Front Panel Indicator Lights continued

“BYPASS” LED: This yellow light will be lit when the UPS’s DC/AC inverter is deactivated and the UPS is in the “Bypass” mode. During normal operation this LED will light briefly when the unit is plugged in, but if an internal fault or overload occurs this light will illuminate constantly to show that connected equipment will receive filtered AC utility power, but will not receive battery power during a blackout. In this case, contact Tripp Lite for service.

“FAULT” LED: This red light will flash when your UPS detects an internal fault (overheating, overvoltages, etc.) or when it detects a wiring fault in your wall outlet (reversed phases, missing ground, etc.) The UPS will only detect wiring faults when it is plugged into a utility outlet but not turned ON. If the light persists after restarting

Basic Operation (continued)

Front Panel Indicator Lights continued

“REPLACE BATT” LED: This red light will be lit and the UPS alarm will sound three beeps* if your UPS’s microprocessor detects a battery fault or if your UPS fails the automatic self-test (after you turn your UPS ON) and the UPS battery is less than fully charged. Let the UPS charge for 12 hours, then perform a second self test (see p.5 for details). If the light continues to stay on, contact Tripp Lite for service.

*After the initial alarm, the UPS will beep once every hour until the problem is corrected.

Rear Panel

the UPS, contact an electrician to check the AC line. Your UPS will identify the presence of most (but not all) wiring faults.

“LOAD ACTIVE METER” LED: This green light will illuminate when your UPS is receiving AC power to indicate that the set of four dual-function LEDs is displaying the load level of your UPS.

“BATT ACTIVE METER” LED: This green light will be lit when your UPS is operating from battery power to indicate that the set of four dual-function LEDs is displaying the battery charge level of your

15 amp/120V

NEMA 5-15R

20 amp/120V

NEMA 5-20R

AC Receptacles: These receptacles provide your con- nected equipment with pure sine-wave AC output from the AC line during normal operation and from battery power during blackouts and severe brownouts. Power provided at these outlets is filtered to protect connected equipment against damaging surges and line noise. Each UPS model includes a select number of receptacles arranged into two separate load banks (clearly indicated on the rear panel of the UPS system). Using PowerAlert Software and RS-232 communications, power at either of these load banks may be turned ON and OFF remotely without affecting the power output at any other recepta- cles. See PowerAlert Software instructions for details.

UPS. Note: the “ON BATT” LED will also be illuminated.

“OVERLOAD” LED: This red light will be lit when your UPS’s capaci- ty has been exceeded while it is in on-line operation. The UPS alarm will beep continuously. Immediately remove overload until light and alarm go off. If you do not immediately remove the overload, the UPS will transfer from on-line to bypass operation.

“BATT LOW” LED: This yellow light will be lit when your UPS’s battery charge level is low. The UPS alarm will beep until either the battery charge is depleted or the batteries are adequately recharged.

“ON BATT” LED: This green light will be lit when AC line voltage is not present and your UPS is providing your equipment with battery power. The UPS will also beep every two seconds, unless silenced by the “ON/TEST” Switch. When this light is illuminated, you can monitor the battery charge level of your UPS on the “BATT ACTIVE METER” LEDs.

20 amp/120V

30 amp/120V

NEMA L5-20R

NEMA L5-30R

Input Circuit Breaker Switch: This resettable breaker prevents high input current from damaging the UPS or the attached load. If this breaker trips, make sure your UPS is connected to AC power of the proper voltage before resetting the circuit breaker by pushing the breaker switch in.

Fan: The fan cools the UPS’s internal components. It is always on when line power is present.

External Battery Pack Connector: Use to connect optional Tripp Lite Battery Packs for additional runtime. Contact Tripp Lite Customer Support at (773) 869-1234 for the appropriate Tripp Lite battery pack to connect. Refer to instructions available with the Battery Pack for complete connection information and safety warnings.

6

7

Page 3 Page 5
Image 4
Page 3 Page 5
Contents SmartOnline Important Safety Instructions Plug your UPS into an electrical outletPlug your equipment into your UPS Turn your UPS onImportantBasicOperationSafety Instructions External Battery Pack ConnectionFront Panel Switches Front Panel Indicator LightsRear Panel Restart the UPS. If the problem persists Check the utility line for wiring problemsCommunications This indicates that utility power is too high Properly. Restart the UPS. If the problemService Or low for the UPS to operate in BypassManual del usuario Importantes instrucciones de seguridad Conecte su UPS en un tomacorrienteEnchufe su equipo al sistema UPS Encienda su sistema UPS onConexión de puerto serial Conexión del paquete de baterías externasInterruptores del panel frontal Luces indicadoras del panel frontalLuces indicadoras del panel frontal continuación Operación básica continuaciónPanel posterior Condición Error de Eeprom Panel posterior continuaciónComunicaciones Condición Reemplazar bateríaLocalización de fallas continuación Almacenamiento y servicio continuaciónGuide de lutilisateur Importantes consignes de sécuritéInstallation suite OrtantImExploitationtySafde baseInstructions Exploitation de base suiteCommutateurs du panneau avant Voyants du panneau avantPanneau arrière Panneau arrière suiteDépannage suite Entreposage Entretien

SU3000XL, SU1000XL, SU2200XL specifications

Tripp Lite is known for its reliable power protection solutions, and the SU3000XL, SU2200XL, and SU1000XL series of uninterruptible power supplies (UPS) exemplify this commitment. Each model is designed to provide high-performance power protection for servers, networking equipment, and critical electronic devices, ensuring that operational continuity is maintained even during power interruptions.

The SU3000XL is a robust solution offering 3000VA / 2400W capacity. It features sine wave output, which is essential for the safe functioning of sensitive electronics. With multiple output options, including a variety of outlets, the SU3000XL supports a wide range of devices. This model also incorporates advanced technologies like Automatic Voltage Regulation (AVR), which stabilizes voltage levels, ensuring connected devices receive clean and consistent power. Additionally, the UPS is equipped with an LCD display, providing real-time monitoring of power conditions, battery status, and load levels.

The SU2200XL presents a versatile 2200VA / 1980W capacity. Similar to the SU3000XL, it offers sine wave output and AVR technology. Its compact design makes it suitable for smaller setups without compromising power availability. The SU2200XL is an ideal choice for businesses or home environments that require dependable backup power for vital systems while maintaining energy efficiency. Built-in USB and serial connectivity allow users to integrate with management software, enabling seamless power management and monitoring.

For environments with lower power needs, the SU1000XL delivers a capacity of 1000VA / 800W. This model is particularly well-suited for desktops, workstations, and smaller network devices. Despite its smaller capacity, the SU1000XL does not skimp on features. It also includes sine wave output and AVR technology, providing the essential power protection that Tripp Lite is known for. An easy-to-read LED display presents vital information at a glance, making it user-friendly.

All three models boast hot-swappable batteries, allowing for easy maintenance without downtime. Furthermore, they come with a variety of safety features, including surge protection and short circuit protection, enhancing their reliability. With a focus on durability, Tripp Lite’s UPS systems are built to last, backed by a solid warranty and customer support. Overall, the SU3000XL, SU2200XL, and SU1000XL ensure that users can trust their power sources, no matter the requirements.
Top Page Image Contents