Tripp Lite SMX & OMNIX owner manual Buttons, For SMX Models Only-POWER Button

Page 5

Basic Operation

Buttons

For SMX Models Only—“POWER” Button:

•To turn the UPS ON: with the UPS plugged into a live AC wall outlet,* press and hold the POWER button for about two seconds.** Release the button. If utility power is absent, you can “cold-start” the UPS (i.e.: turn it ON and supply power for a limited time from its batteries***) by pressing and holding the POWER button for about two seconds.**

•To turn the UPS OFF: with the UPS ON and receiving utility power, press and hold the POWER button for one second.** Then unplug the UPS from the wall outlet. The UPS will be completely OFF.

*After you plug the UPS into a live AC outlet, the UPS will automatically charge its batteries, but will not supply power to its outlets until it is turned ON. ** The alarm will beep once briefly after the indicated interval has passed. *** If fully charged.

For OMNIX Models Only—“UPS/STANDBY” Button:

Use the UPS/STANDBY button to do three things:

Switch your UPS’s Operating Mode: While your UPS is plugged into a live AC outlet, press the UPS/STANDBY button and hold it until you hear a beep (about 2 seconds) to toggle between the following operating modes. Choose your UPS’s operating mode based on the regional guidelines in Step 3 of the Quick Installation section.

•UPS Mode: ENABLES battery backup. UPS Conditions: While receiv- ing adequate utility line power, the UPS supplies power to its AC recep- tacles and charges its batteries; its “POWER” indicator light will be lit. If the utility line power fails or becomes inadequate, the UPS will supply inverted AC power to its receptacles if its batteries are sufficiently charged. Setting Advantages: Provides battery backup during blackouts or brownouts.

•STANDBY Mode: DISABLES battery backup. UPS Conditions: While receiving adequate utility line power, the UPS supplies power to its AC receptacles and charges its batteries; the “POWER” indicator light will be flashing. Setting Advantages: Continues to charge the battery when power is present while turning OFF the inverter to prevent battery deple- tion during power outages when equipment is not in use.

Cold-Start Your UPS: You may “cold start” your UPS and use it as a stand-alone power source when utility power is not present, providing that the UPS battery is charged. To “cold start” your UPS, press and hold the UPS/STANDBY button until you hear a beep (about 2 seconds), then release it. The “BATTERY CHARGE/BATTERY POWER” indicator light will illuminate and AC power inverted from stored battery power will be provided at the UPS receptacles.

Shut Down Your UPS: Press and hold the UPS/STANDBY button when AC line power is absent (i.e. during a blackout, or when the UPS is unplugged) to deactivate your UPS.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Medical Grade UPS Systems SMX & OmnixUPS Location Warnings Important Safety InstructionsUPS on Serial Communications Quick Installation optionalUSB Communications Tel/DSL ProtectionFor Omnix Models Only-UPS/STANDBY Button For SMX Models Only-POWER ButtonButtons For All Models-MUTE/TEST Button Power LED Indicator LightsBattery Charge / Battery Power LED Other UPS Features Storage Regulatory Compliance Identification Numbers ServiceSistemas UPS grado medico Manual de operaciónAdvertencias sobre la colocación del UPS Importantes instrucciones de seguridadAdvertencias sobre la conexión del equipo Advertencias sobre las bateríasSólo para modelos SMX Encienda el UPS Sólo para modelos OmnixPara todos los modelos-Conecte su equipo en el UPS Comunicaciones en serie Instalación rápida optativaComunicaciones USB Protección para módem / faxSólo para modelos OMNIX-Botón UPS/STANDBY UPS/Reserva Botones Sólo para modelos SMX Botón Power AlimentaciónPara todos los modelos-Botón MUTE/TEST Silencio/Prueba Operación básica continuaciónLuces indicadoras Otras características del sistema UPS Norm Delay Servicio AlmacenamientoNota sobre el rotulado Declaraciones Regulatorias y de SeguridadSystèmes UPS de classe médicale Guide de lutilisateurImportantes consignes de sécurité Mises en garde relatives à lemplacement du système UPSMises en garde relatives au raccord du système UPS Mises en garde relatives au raccord de léquipementPour les modèles SMX uniquement Mettez en marche lUPS on Pour les modèles Omnix uniquementPour tous les modèles-Branchez votre équipement dans lUPS Communications en série Installation rapide facultativeCommunications USB Protection du modem télécopieurExploitation de base Pour tous les modèles-bouton MUTE/TEST MUET/TEST Exploitation de base suiteVoyants lumineux Témoin lumineux Power alimentationExploitation de base suite Autres fonctions Entretien Entreposage

SMX & OMNIX specifications

Tripp Lite, a well-known name in the power management industry, offers innovative solutions designed to protect critical electronic equipment from various power disturbances. Among its standout products are the SMX (SmartPro) and OMNIX series of uninterruptible power supplies (UPS). Both series are engineered to cater to diverse needs in the realms of home, office, and data center environments, ensuring maximum performance and reliability.

The SMX series is characterized by its compact design and scalability. It is designed to provide extended battery runtime, making it an ideal choice for critical applications that require consistent power uptime. The SMX units incorporate advanced features such as an LCD panel for real-time monitoring of battery status, load level, and power conditions. Additionally, they are equipped with automatic voltage regulation (AVR) technology that stabilizes voltage fluctuations, protecting connected devices from damage.

One of the key advantages of the SMX series is its flexible configuration options. With multiple outlet types, users can connect different equipment types without worrying about compatibility issues. Moreover, SMX UPS units come with USB and serial ports for easy communication with various systems, allowing for seamless integration into existing setups.

The OMNIX series, on the other hand, focuses on delivering superior performance tailored for larger applications. This line of UPS solutions is designed for mission-critical environments requiring robust power protection. OMNIX units feature advanced battery management technology that optimizes battery life and performance. They also come with a user-friendly interface that provides insights into the UPS status and environment, enabling users to make informed decisions regarding their power management.

Both the SMX and OMNIX series leverage Tripp Lite's signature line-interactive technology, providing automatic voltage regulation to mitigate surges and sags effectively. This technology ensures that connected devices receive clean and consistent power. Additionally, they are built with high-efficiency designs that minimize energy consumption and operational costs, making them an eco-friendly choice.

In terms of reliability, both series are backed by Tripp Lite’s commitment to quality and support. With extensive testing and customer service resources, users can trust that their investments in Tripp Lite products will yield long-lasting performance. Overall, whether users opt for the SMX or OMNIX series, they are assured of gaining state-of-the-art power management solutions that enhance the longevity of their electronic devices while ensuring uninterrupted operation.
Top Page Image Contents