Tripp Lite SMX & OMNIX owner manual For All Models-MUTE/TEST Button

Page 6

Basic Operation continued

For All Models—“MUTE/TEST” Button:

To Silence (or “Mute”) UPS Alarms: briefly press and release the MUTE/TEST button.*

To Run a Self-Test: with your UPS plugged in and turned ON, press and hold the MUTE/TEST button for two seconds.* The alarm will beep several times and the UPS will perform a self-test. See “Results of a Self-Test” below. Note: you can leave connected equipment on during a self-test. Your UPS, however, will not perform a self-test if it is not turned ON (see "POWER" Button description).

CAUTION! Do not unplug your UPS to test its batteries. This will remove safe electrical grounding and may introduce a damaging surge into your network connections.

Results of a Self-Test: The test will last approximately 10 seconds as the UPS switches to battery to test its load capacity and battery charge.**

If the “OUTPUT LOAD LEVEL” LED remains lit red and the alarm continues to sound after the test, the UPS’s outlets are overloaded. To clear the overload, unplug some of your equipment and run the self-test repeatedly until the “OUTPUT LOAD LEVEL” LED is no longer lit red and the alarm is no longer sounding.

CAUTION! Any overload that is not corrected by the user imme- diately following a self-test may cause the UPS to shutdown and cease supplying output power in the event of a blackout or severe brownout.

If the “BATTERYWARNING” LED remains lit and the alarm continues to sound after the test, the UPS batteries need to be recharged or replaced. Allow the UPS to recharge continuously for 12 hours, and repeat the self-test. If the LED remains lit, contact Tripp Lite for service. If your UPS requires battery replacement, visit www.tripplite.com/sup- port/battery/index.cfm to locate the specific Tripp Lite replacement battery for your UPS.

*The alarm will beep once briefly after the indicated interval has passed. ** SMX models’oper- ation during the self-test: the “POWER” LED will be flashing and the “OUTPUT LOAD LEVEL” and “BATTERY CHARGE” LEDs will be lit and the UPS alarm will sound. OMNIX models’operation during the self-test: all LEDs will be lit and the UPS alarm will sound.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents SMX & Omnix Medical Grade UPS SystemsImportant Safety Instructions UPS Location WarningsUPS on USB Communications Quick Installation optionalSerial Communications Tel/DSL ProtectionFor SMX Models Only-POWER Button ButtonsFor Omnix Models Only-UPS/STANDBY Button For All Models-MUTE/TEST Button Indicator Lights Power LEDBattery Charge / Battery Power LED Other UPS Features Storage Service Regulatory Compliance Identification NumbersManual de operación Sistemas UPS grado medicoAdvertencias sobre la conexión del equipo Importantes instrucciones de seguridadAdvertencias sobre la colocación del UPS Advertencias sobre las bateríasSólo para modelos Omnix Para todos los modelos-Conecte su equipo en el UPSSólo para modelos SMX Encienda el UPS Comunicaciones USB Instalación rápida optativaComunicaciones en serie Protección para módem / faxBotones Sólo para modelos SMX Botón Power Alimentación Sólo para modelos OMNIX-Botón UPS/STANDBY UPS/ReservaOperación básica continuación Para todos los modelos-Botón MUTE/TEST Silencio/PruebaLuces indicadoras Otras características del sistema UPS Norm Delay Almacenamiento ServicioDeclaraciones Regulatorias y de Seguridad Nota sobre el rotuladoGuide de lutilisateur Systèmes UPS de classe médicaleMises en garde relatives au raccord du système UPS Mises en garde relatives à lemplacement du système UPSImportantes consignes de sécurité Mises en garde relatives au raccord de léquipementPour les modèles Omnix uniquement Pour tous les modèles-Branchez votre équipement dans lUPSPour les modèles SMX uniquement Mettez en marche lUPS on Communications USB Installation rapide facultativeCommunications en série Protection du modem télécopieurExploitation de base Exploitation de base suite Pour tous les modèles-bouton MUTE/TEST MUET/TESTTémoin lumineux Power alimentation Voyants lumineuxExploitation de base suite Autres fonctions Entreposage Entretien

SMX & OMNIX specifications

Tripp Lite, a well-known name in the power management industry, offers innovative solutions designed to protect critical electronic equipment from various power disturbances. Among its standout products are the SMX (SmartPro) and OMNIX series of uninterruptible power supplies (UPS). Both series are engineered to cater to diverse needs in the realms of home, office, and data center environments, ensuring maximum performance and reliability.

The SMX series is characterized by its compact design and scalability. It is designed to provide extended battery runtime, making it an ideal choice for critical applications that require consistent power uptime. The SMX units incorporate advanced features such as an LCD panel for real-time monitoring of battery status, load level, and power conditions. Additionally, they are equipped with automatic voltage regulation (AVR) technology that stabilizes voltage fluctuations, protecting connected devices from damage.

One of the key advantages of the SMX series is its flexible configuration options. With multiple outlet types, users can connect different equipment types without worrying about compatibility issues. Moreover, SMX UPS units come with USB and serial ports for easy communication with various systems, allowing for seamless integration into existing setups.

The OMNIX series, on the other hand, focuses on delivering superior performance tailored for larger applications. This line of UPS solutions is designed for mission-critical environments requiring robust power protection. OMNIX units feature advanced battery management technology that optimizes battery life and performance. They also come with a user-friendly interface that provides insights into the UPS status and environment, enabling users to make informed decisions regarding their power management.

Both the SMX and OMNIX series leverage Tripp Lite's signature line-interactive technology, providing automatic voltage regulation to mitigate surges and sags effectively. This technology ensures that connected devices receive clean and consistent power. Additionally, they are built with high-efficiency designs that minimize energy consumption and operational costs, making them an eco-friendly choice.

In terms of reliability, both series are backed by Tripp Lite’s commitment to quality and support. With extensive testing and customer service resources, users can trust that their investments in Tripp Lite products will yield long-lasting performance. Overall, whether users opt for the SMX or OMNIX series, they are assured of gaining state-of-the-art power management solutions that enhance the longevity of their electronic devices while ensuring uninterrupted operation.
Top Page Image Contents