Tripp Lite B020-008 warranty F3 Set Environment SET, OSD Hotkey

Page 17

F3 Set Environment (SET)

This function allows each User and the Administrator to set up their own working environment. A separate profile for each is stored by the OSD and is activated according to the Username that was provided during Login.

To change a setting:

1)Double Click the item; or move the highlight bar to it and press [Enter]

2)After you select an item, a submenu with more choices will appear. To make a selection, either double-click a choice or move the Highlight Bar to the desired place and press [Enter]. An icon will appear beside the selected choice to identify it. The settings are explained in the following table:

 

Setting

Function

 

 

 

 

 

OSD HOTKEY

Select the Hotkey that activates the OSD function: use either

 

 

[Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl].

 

 

Since the Ctrl key combination may conflict with programs running on the computers,

 

 

the default is the Scroll Lock combination.

 

 

 

 

 

PORT ID DISPLAY

Position the Port ID identifier anywhere on the screen. The default is the upper right corner.

 

POSITION

Use the Mouse or the Arrow Keys plus [Pg Up], [Pg Dn], [Home], [End], and [5] (on the

 

 

numeric keypad with Num Lock off), to position the Port ID display, then Double Click or

 

 

press [Enter] to lock the position and return to the Set submenu.

 

 

Note: The position for the ID identifier is set independently for each port on the installation;

 

 

the choice specified here only applies to the port for computer that is currently active.

 

 

 

 

 

PORT ID DISPLAY

Determine the amount of time a Port ID appears on the monitor once a port change has

 

DURATION

taken place. The choices are:

 

 

User Defined – user defined amount of time (from 1 - 255 sec.) Always On - which

 

 

displays the Port ID at all times.

 

 

If choosing User Defined, key in the number of seconds and press [Enter]. The default is

 

 

3 Seconds. A setting of 0 (zero) disables this function.

 

 

 

 

 

PORT ID DISPLAY

Select how the Port ID is displayed: the Port Number alone (PORT NUMBER); the Port

 

MODE

Name alone (PORT NAME); or the Port Number plus the Port Name (PORT NUMBER

 

 

+ PORT NAME). The default is (PORT NUMBER + PORT NAME).

 

 

 

 

 

SCAN DURATION

Determine how long each port is connected as the KVM cycles through the ports in Auto

 

 

Scan Mode (see F7 SCAN page 20). Key in a value from 1 - 255 seconds, then press

 

 

[Enter]. The default is 5 seconds; a setting of 0 (zero) disables the function.

 

 

 

 

 

SCAN/SKIP MODE

Select the computers that will be accessed under Skip Mode (see F5 SKP, page 19), and

 

 

Auto Scan Mode (see F7 SCAN, page 20). Choices are:

 

 

ALL - All the Ports which have been set Accessible (see SETACCESSIBLE PORTS, page 19;

 

 

POWERED ON – Only those Ports which have been set Accessible and are Powered On;

 

 

QUICK VIEW - Only those Ports which have been set Accessible and have been selected

 

 

as Quick View Ports (see SET QUICK VIEW PORTS, page 18);

 

 

QUICK VIEW + POWERED ON - Only those Ports which have been set Accessible

 

 

and have been selected as Quick View Ports and are Powered On.

 

 

The default is ALL.

 

 

Note: The Quick View choices only show up on the Administrator’s screen, since only the

 

 

administrator has Quick View setting rights (see SET QUICK VIEW PORTS, page 18).

 

 

 

 

 

SCREEN BLANKER

If the console is left idle for the amount of time set with this function, the screen is

 

 

blanked. Key in a value from 1 - 30 minutes, then press [Enter]. A setting of 0 disables

 

 

this function. The default is 0 (disabled).

 

 

 

 

 

HOTKEY COMMAND

Enables / Disables the Hotkey Command function if a conflict with programs running

 

MODE

on the computers occurs.

 

 

 

 

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents This package should consist Table of Contents Overview Features IncludeComputer System RequirementsConsole for B022-016 only CablesIntroduction Front View of Console KVM SwitchStation ID LED Front View of B022-016Port LEDs Rear View for B022-016 Single-Station Installations InstallationMultiple Station Daisy-Chained Installation To set up a daisy-chained installationLCD OSD allows you to set up and configure the LCD display LCD OSD On-Screen Display ConfigurationBasic Operation Manual Port SwitchingOpening the Console KVM Closing the Console KVMPort ID Numbering Powering Off and RestartingHot Plugging Invoking the Hotkey Mode Port Control Using HotkeysHotkeys Selecting the Active PortStarting Auto Scan Setting the Scan IntervalPausing in Auto Scan Hotkey Beeper Control Skip ModeHotkey Summary Table Port ID EnterOSD Navigation OSD On-Screen Display OperationOSD Overview OSD Functions OSD Main Screen HeadingsHeading Explanation F1 Go To GotoOSD Hotkey F3 Set Environment SETPassword F4 Administrator ADMF5 Skip SKP F6 Broadcast Mode BRCF8 Log Out Lout F7 Scan ScanBefore You Begin Firmware Upgrade UtilityTo prepare for the firmware upgrade, do the following To upgrade your firmware Starting the UpgradeFirmware Upgrade Recovery Upgrade SucceededUpgrade Failed Setting Default OSD Factory Default SettingsAppendix a Computer Connection TableSpecifications TroubleshootingSymptom Possible Cause Action Function B020-008 B020-016 B022-016Clear Log-in Information Appendix BAppendix D Appendix CFCC Radio/TV Interference Notice Appendix EOptional Rack Mounting Addendum

B020-008 specifications

The Tripp Lite B020-008 is an 8-port KVM switch designed to simplify the management of multiple servers and workstations from a single console. This device is especially beneficial for data centers, IT professionals, and businesses that require streamlined operations to enhance productivity and efficiency.

One of the main features of the B020-008 is its ability to control up to eight computers or servers using just one keyboard, monitor, and mouse. This not only saves space but also reduces the clutter usually associated with multiple workstations. The KVM switch supports various operating systems, including Windows, Linux, and Mac, making it a versatile solution for diverse IT environments.

The B020-008 employs advanced technology such as USB and VGA connections. Its USB compatibility ensures that users can easily connect modern peripherals, enhancing functionality without requiring additional hardware. The VGA support allows for clear video output at resolutions up to 1920 x 1440, ensuring crisp images and text, essential for tasks that require attention to detail.

Another notable characteristic is the hot-key switching capability, which enables users to toggle between connected computers simply by pressing a key combination. This feature significantly enhances workflow, allowing for quick transitions between tasks without the need to physically switch cables. Additionally, the KVM switch supports audio output, enabling users to manage sound from different computers without needing separate audio equipment.

The B020-008 is equipped with a sturdy metal housing designed for durability and longevity in demanding environments. It also comes with mounting options that allow for easy installation in rack-mounted systems, which is an essential requirement for many tech-savvy organizations.

Security features are another focal point; the KVM switch supports password protection to prevent unauthorized access, ensuring that sensitive information remains secure. It’s ideal for environments where data security is paramount.

In summary, the Tripp Lite B020-008 8-Port KVM switch stands out for its ease of use, multifunctionality, and robust design. With its capability to connect multiple computers, USB and VGA compatibility, hot-key switching, audio support, and built-in security features, it represents an ideal solution for managing complex IT ecosystems efficiently. This KVM switch is a reliable tool that helps enhance productivity and streamline operations for IT professionals.
Top Page Image Contents