Tripp Lite B020-008 warranty Rear View for B022-016

Page 7

Rear View of Console KVM Switch (either 16 or 8 ports depending on model)

1.Daisy-Chain Port

When Daisy Chaining Units, the cable plugs in here.

2. CPU Port Section

The cables that link to the computers plug in here.

Note: The shape of these 15-pin connectors has been specifically modified so that only KVM cables designed to work with this switch can plug in (see the Cables section on p. 4, for details). Do NOT attempt to use ordinary 15 pin VGA connector cables to link these ports to the computers.

3.Power Socket

This is a standard 3-prong AC power socket. The power cord from an AC source plugs in here.

4.Power Switch

This is a standard rocker switch that powers the unit On and Off.

5.External Console Section

For flexibility and convenience, the B020-016/B020-008 supports an independent, external, KVM console. The external console’s keyboard, monitor, and mouse cables plug in here.

Rear View for B022-016

1.Daisy-Chain Port

Plug the daisy-chain cable into this port when adding additional B022-016 KVM Switches.

1

2

3

4

6

7

5

2. CPU Port Section

Plug the KVM cable for each computer into these ports.

Note: The shape of the 15-pin connectors has been specifically modified so that only the correct KVM cables for this switch can plug in (see Cables, page 4, for cable choices). Do NOT attempt to use an ordinary 15-pin VGA connector cable to link a computer to these ports.

3.Cable Management Slot

A cable tie can be used to gather the cables together and then tied to this slot to help manage the cables.

4.Power Port

The power adapter cable plugs into this port.

5.Console Port Section

The keyboard, monitor and mouse plug in here on a single-stage station or on the first stage of a daisy- chained installation.

6.Firmware Upgrade Port

The Firmware Upgrade Cable used to download the firmware upgrade data from the administrator’s computer to the KVM switch (see page 20-23), the cable plugs into this RJ-11 port.

7.Firmware Upgrade Recovery Switch

During normal operation and while performing a firmware upgrade, this switch should be in the NORMAL position. See page 23 for details on the use of this switch.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents
This package should consist Table of Contents Overview Features IncludeCables System RequirementsComputer Console for B022-016 onlyIntroduction Front View of Console KVM SwitchPort LEDs Front View of B022-016Station ID LED Rear View for B022-016 To set up a daisy-chained installation InstallationSingle-Station Installations Multiple Station Daisy-Chained InstallationLCD OSD allows you to set up and configure the LCD display LCD OSD On-Screen Display ConfigurationClosing the Console KVM Manual Port SwitchingBasic Operation Opening the Console KVMHot Plugging Powering Off and RestartingPort ID Numbering Selecting the Active Port Port Control Using HotkeysInvoking the Hotkey Mode HotkeysPausing in Auto Scan Setting the Scan IntervalStarting Auto Scan Port ID Enter Skip ModeHotkey Beeper Control Hotkey Summary TableOSD Overview OSD On-Screen Display OperationOSD Navigation F1 Go To Goto OSD Main Screen HeadingsOSD Functions Heading ExplanationOSD Hotkey F3 Set Environment SETPassword F4 Administrator ADMF5 Skip SKP F6 Broadcast Mode BRCF8 Log Out Lout F7 Scan ScanTo prepare for the firmware upgrade, do the following Firmware Upgrade UtilityBefore You Begin To upgrade your firmware Starting the UpgradeUpgrade Failed Upgrade SucceededFirmware Upgrade Recovery Computer Connection Table OSD Factory Default SettingsSetting Default Appendix aFunction B020-008 B020-016 B022-016 TroubleshootingSpecifications Symptom Possible Cause ActionClear Log-in Information Appendix BAppendix D Appendix COptional Rack Mounting Appendix EFCC Radio/TV Interference Notice Addendum
Top Page Image Contents