Tripp Lite B020-008 warranty Hot Plugging, Powering Off and Restarting, Port ID Numbering

Page 11

Basic Operation (continued)

Hot Plugging

All KVM Switches support hot plugging—components can be removed and added back into the installa- tion by unplugging their cables from the ports without having to shut the switch down. However, in order for Hot Plugging to work properly, these procedures must be followed:

Switching Station Positions

Switch station positions by simply unplugging from the old parent and plugging into a new one. After you do, in order for the OSD menus to correspond to the change, you must reset the OSD.

Hot Plugging CPU Ports

In order for the OSD menus to correspond to the change made, you must manually reconfigure the OSD information for the new Port information. See the F3 SET (page 17) and F4 ADM (page 18), functions for details.

Note: If the computer’s Operating System does not support hot plugging, this function may not work properly.

Hot Plugging Console Ports (for B022-016)

Keyboard, monitor, and mouse can all be hot plugged. When hot plugging the mouse:

1.You may unplug the mouse and plug it back in again (to reset the mouse, for example), as long as you use the same mouse.

2.If you plug in a different mouse, all the stations and all the computers on the installation must be shut down for 10 seconds, then restarted using the Power Up Sequence described on page 6.)

Note: If, after hot plugging (or at any other time), there is no response to keyboard and/or mouse input, perform a Keyboard and Mouse Reset by pressing in the Reset switch (see page 6).

Powering Off and Restarting

If one of the KVM switches must be powered Off, do the following before starting it back up: 1. Shut down all the computers that are attached to it.

Note: Unplug the power cord of any computer that has the Keyboard Power On function. Otherwise, the KVM will still receive power from this computer.

2. Wait 10 seconds, then plug the KVM switch back in.

3. Once the switch is up, the computers can be powered On.

Note: If you have shut down more than one Station, power up the highest Station first and work your way down to the lowest one.

Port ID Numbering

Each CPU port in an installation is assigned a unique Port ID. The Port ID is made up of two parts: a Station Number, and a Port Number:

•The Station Number is a two-digit number that identifies the switche’s position in the daisy chain sequence. This corresponds to the number displayed on the front panel Station ID LED.

•The Port Number is a two-digit number which identifies the port on Station that is connected to the computer.

•The Station Number precedes the Port Number.

•Station and Port numbers are always 2 digits, so 1 - 9 becomes 01 - 09. Eg., a computer attached to Port 7 of Station 15 has a Port ID of 15-07.

Port Selection

A Port is selected either by using the keyboard to enter Hotkey combinations, or by using the On-Screen Display (OSD). Hotkey Port Selection is discussed in the next section; OSD Operation is discussed in detail on pages 15-20.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents This package should consist Table of Contents Overview Features IncludeCables System RequirementsComputer Console for B022-016 onlyIntroduction Front View of Console KVM SwitchStation ID LED Front View of B022-016Port LEDs Rear View for B022-016 To set up a daisy-chained installation InstallationSingle-Station Installations Multiple Station Daisy-Chained InstallationLCD OSD allows you to set up and configure the LCD display LCD OSD On-Screen Display ConfigurationClosing the Console KVM Manual Port SwitchingBasic Operation Opening the Console KVMPort ID Numbering Powering Off and RestartingHot Plugging Selecting the Active Port Port Control Using HotkeysInvoking the Hotkey Mode HotkeysStarting Auto Scan Setting the Scan IntervalPausing in Auto Scan Port ID Enter Skip ModeHotkey Beeper Control Hotkey Summary TableOSD Navigation OSD On-Screen Display OperationOSD Overview F1 Go To Goto OSD Main Screen HeadingsOSD Functions Heading ExplanationOSD Hotkey F3 Set Environment SETPassword F4 Administrator ADMF5 Skip SKP F6 Broadcast Mode BRCF8 Log Out Lout F7 Scan ScanBefore You Begin Firmware Upgrade UtilityTo prepare for the firmware upgrade, do the following To upgrade your firmware Starting the UpgradeFirmware Upgrade Recovery Upgrade SucceededUpgrade Failed Computer Connection Table OSD Factory Default SettingsSetting Default Appendix aFunction B020-008 B020-016 B022-016 TroubleshootingSpecifications Symptom Possible Cause ActionClear Log-in Information Appendix BAppendix D Appendix CFCC Radio/TV Interference Notice Appendix EOptional Rack Mounting Addendum

B020-008 specifications

The Tripp Lite B020-008 is an 8-port KVM switch designed to simplify the management of multiple servers and workstations from a single console. This device is especially beneficial for data centers, IT professionals, and businesses that require streamlined operations to enhance productivity and efficiency.

One of the main features of the B020-008 is its ability to control up to eight computers or servers using just one keyboard, monitor, and mouse. This not only saves space but also reduces the clutter usually associated with multiple workstations. The KVM switch supports various operating systems, including Windows, Linux, and Mac, making it a versatile solution for diverse IT environments.

The B020-008 employs advanced technology such as USB and VGA connections. Its USB compatibility ensures that users can easily connect modern peripherals, enhancing functionality without requiring additional hardware. The VGA support allows for clear video output at resolutions up to 1920 x 1440, ensuring crisp images and text, essential for tasks that require attention to detail.

Another notable characteristic is the hot-key switching capability, which enables users to toggle between connected computers simply by pressing a key combination. This feature significantly enhances workflow, allowing for quick transitions between tasks without the need to physically switch cables. Additionally, the KVM switch supports audio output, enabling users to manage sound from different computers without needing separate audio equipment.

The B020-008 is equipped with a sturdy metal housing designed for durability and longevity in demanding environments. It also comes with mounting options that allow for easy installation in rack-mounted systems, which is an essential requirement for many tech-savvy organizations.

Security features are another focal point; the KVM switch supports password protection to prevent unauthorized access, ensuring that sensitive information remains secure. It’s ideal for environments where data security is paramount.

In summary, the Tripp Lite B020-008 8-Port KVM switch stands out for its ease of use, multifunctionality, and robust design. With its capability to connect multiple computers, USB and VGA compatibility, hot-key switching, audio support, and built-in security features, it represents an ideal solution for managing complex IT ecosystems efficiently. This KVM switch is a reliable tool that helps enhance productivity and streamline operations for IT professionals.
Top Page Image Contents